CISCO-PROXY-CONTROL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
52
.1.3.6.1.4.1.9.10.57.1.1.1 · 1 row entry · 26 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cProxyCallActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROXY-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROXY-CONTROL-MIB::cProxyCallActiveTable'
This table is the Proxy extension to the call Active
table of IETF Dial Control MIB. It contains Proxy call
leg information about specific proxied calls.
cProxyCallActiveEntry row .1.3.6.1.4.1.9.10.57.1.1.1.1
The information regarding a single proxied call leg.
An entry of this table is created when its associated call
Active entry in the IETF Dial Control MIB is created and
the call Active entry contains information for the…
Column Syntax OID
The global call identifier for the Proxy call.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid
Type Constraints:
range: 0..16
.1.3.6.1.4.1.9.10.57.1.1.1.1.1
Remote system IP address for the call.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.9.10.57.1.1.1.1.2
Remote system UDP listener port to which to transmit
voice packets for the call. A value of zero indicates
that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.3
Remote system UDP listener port to which to transmit
video packets for the call. A value of zero indicates
that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.4
First remote system UDP listener port to which to transmit
T120 packets for the call. A value of zero indicates that
no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.5
Second remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.6
Third remote system UDP listener port to which to transmit
T120 packets for the call. A value of zero indicates that
no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.7
Fourth remote system UDP listener port to which to transmit
T120 packets for the call. A value of zero indicates that
no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.8
The type of end point this proxy call leg is connected to.
CProxyEndptType
Type Values:
0other
1proxy
2gateway
.1.3.6.1.4.1.9.10.57.1.1.1.1.9
The H225 Manufacturers code for this endpoint.
Zero indicates unknown vendor.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.1.1.1.10
The requested bandwidth for this proxied call leg.
kilobits per secondInteger32
Constraints:
range: 0-10000000
.1.3.6.1.4.1.9.10.57.1.1.1.1.11
The actual bandwidth used by the proxied call.
kilobits per secondInteger32
Constraints:
range: 0-10000000
.1.3.6.1.4.1.9.10.57.1.1.1.1.12
The negotiated coder rate. It specifies the transmit
rate of audio compression to its associated call leg
for the call.
CProxyAudioCodec
Type Values:
0other
1nonStandard
2g711Alawr64k
3g711Alawr56k
4g711Ulawr64k
5g711Ulawr56k
6g722r64k
7g722r56k
8g722r48k
9g7231
10g728
11g729
12g729AnnexA
13is11172
14is13818
15g729AnnexB
16g729AnnexAB
17g729AnnexC
18gsmFullRate
19gsmHalfRate
20gsmEnhancedFullRate
21gsmAmrNb
22iLBC
23iSAC
.1.3.6.1.4.1.9.10.57.1.1.1.1.13
The negotiated coder rate. It specifies the transmit
rate of video compression to its associated call leg
for the call.
CProxyVideoCodec
Type Values:
0other
1nonStandard
2h261
3h262
4h263
5is11172
.1.3.6.1.4.1.9.10.57.1.1.1.1.14
The number of audio packets received from the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.15
The number of audio bytes received from the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.16
The number of audio packets transmitted to the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.17
The number of audio bytes transmitted to the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.18
The number of video packets received from the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.19
The number of video bytes received from the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.20
The number of video packets transmitted to the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.21
The number of video bytes transmitted to the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.22
The number of T120 data packets received from the
remote end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.23
The number of T120 data bytes received from the remote
end of this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.24
The number of T120 data packets transmitted to the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.25
The number of T120 data bytes transmitted to the remote
end of this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.1.1.1.26
.1.3.6.1.4.1.9.10.57.1.2.1 · 1 row entry · 26 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cProxyCallHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROXY-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROXY-CONTROL-MIB::cProxyCallHistoryTable'
This table is the Proxy extension to the History call table
of IETF Dial Control MIB. It contains PROXY call leg
information about proxied call.
cProxyCallHistoryEntry row .1.3.6.1.4.1.9.10.57.1.2.1.1
The information regarding a single proxied call leg.
An entry of this table is created when its associated call
History entry in the IETF Dial Control MIB is created. The
call History entry contains information for the …
Column Syntax OID
The global call identifier for the Proxy call.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid
Type Constraints:
range: 0..16
.1.3.6.1.4.1.9.10.57.1.2.1.1.1
Remote system IP address for the call.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.9.10.57.1.2.1.1.2
Remote system UDP listener port to which to transmit
voice packets for the call. A value of zero indicates
that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.3
Remote system UDP listener port to which to transmit
video packets for the call. A value of zero indicates
that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.4
First remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.5
Second remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.6
Third remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.7
Fourth remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.8
The type of end point this proxy call leg is connected to.
CProxyEndptType
Type Values:
0other
1proxy
2gateway
.1.3.6.1.4.1.9.10.57.1.2.1.1.9
The H225 Manufacturers code for this endpoint.
Zero indicates unknown vendor.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.10.57.1.2.1.1.10
The requested bandwidth for this proxied call leg.
kilobits per secondInteger32
Constraints:
range: 0-10000000
.1.3.6.1.4.1.9.10.57.1.2.1.1.11
The actual bandwidth used by the proxied call.
kilobits per secondInteger32
Constraints:
range: 0-10000000
.1.3.6.1.4.1.9.10.57.1.2.1.1.12
The negotiated coder rate. It specifies the transmit
rate of audio compression to its associated call leg
for the call.
CProxyAudioCodec
Type Values:
0other
1nonStandard
2g711Alawr64k
3g711Alawr56k
4g711Ulawr64k
5g711Ulawr56k
6g722r64k
7g722r56k
8g722r48k
9g7231
10g728
11g729
12g729AnnexA
13is11172
14is13818
15g729AnnexB
16g729AnnexAB
17g729AnnexC
18gsmFullRate
19gsmHalfRate
20gsmEnhancedFullRate
21gsmAmrNb
22iLBC
23iSAC
.1.3.6.1.4.1.9.10.57.1.2.1.1.13
The negotiated coder rate. It specifies the transmit
rate of video compression to its associated call leg
for the call.
CProxyVideoCodec
Type Values:
0other
1nonStandard
2h261
3h262
4h263
5is11172
.1.3.6.1.4.1.9.10.57.1.2.1.1.14
The number of audio packets received from the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.15
The number of audio bytes received from the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.16
The number of audio packets transmitted to the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.17
The number of audio bytes transmitted to the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.18
The number of video packets received from the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.19
The number of video bytes received from the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.20
The number of video packets transmitted to the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.21
The number of video bytes transmitted to the remote end for
this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.22
The number of T120 data packets received from the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.23
The number of T120 data bytes received from the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.24
The number of T120 data packets transmitted to the remote
end for this call.
packetsDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.25
The number of T120 data bytes transmitted to the remote
end for this call.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.57.1.2.1.1.26