CISCO-PREFERRED-PATH-MIB
The MIB module for the management of
preferred path. This MIB enables managers
to configure and monitor Preferred Path
parameters.
Preferred path provides a method of routing
traffic over the selected paths, not necessarily
the preferred shortest path as chosen by routing
protocols such as FSPF. This kind of control allows
users to choose shortest paths based on
characteristics, such as frames received on a
selected interface or frames with selected source
FC-ID. This feature allows users to ensure paths
seperation between switches for different traffic
between a host and a target.
Glossary:
FC-ID - Fibre Channel Identifier.
VSAN - Virtual Storage Area Network.
fcroute - Fibre Channel route to host or target.
FSPF - Fibre Shortest Path First.
IVR - Inter-VSAN Routing.
- Source file
CISCO-PREFERRED-PATH-MIB- Last revised
- Identity
ciscoPrefPathMIB- Base OID
1.3.6.1.4.1.9.9.592
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcAddressId VsanIndex |
| CISCO-VSAN-MIB | notifyVsanIndex |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-PREFERRED-PATH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-PREFERRED-PATH-MIB::ciscoPrefPathMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PREFERRED-PATH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PREFERRED-PATH-MIB::ciscoPrefPathMIB'
Objects (48)
Showing 48 of 48 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.592 |
||
.1.3.6.1.4.1.9.9.592.0 |
||
.1.3.6.1.4.1.9.9.592.1 |
||
.1.3.6.1.4.1.9.9.592.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.592.1.1.1.1.2 |
|
.1.3.6.1.4.1.9.9.592.1.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.592.1.1.1.1.4 |
||
|
|
.1.3.6.1.4.1.9.9.592.1.1.1.1.5 |
|
.1.3.6.1.4.1.9.9.592.1.1.1.1.6 |
||
.1.3.6.1.4.1.9.9.592.1.1.1.1.7 |
||
.1.3.6.1.4.1.9.9.592.1.1.2 |
||
.1.3.6.1.4.1.9.9.592.1.1.2.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.592.1.1.2.1.1 |
|
.1.3.6.1.4.1.9.9.592.1.1.3 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1.2 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1.3 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1.4 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1.5 |
||
.1.3.6.1.4.1.9.9.592.1.1.3.1.6 |
||
.1.3.6.1.4.1.9.9.592.1.1.4 |
||
.1.3.6.1.4.1.9.9.592.1.1.4.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.4.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.1.4.1.2 |
||
.1.3.6.1.4.1.9.9.592.1.1.4.1.3 |
||
.1.3.6.1.4.1.9.9.592.1.1.4.1.4 |
||
.1.3.6.1.4.1.9.9.592.1.1.5 |
||
.1.3.6.1.4.1.9.9.592.1.2 |
||
.1.3.6.1.4.1.9.9.592.1.2.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.1.1.2 |
||
.1.3.6.1.4.1.9.9.592.1.2.1.1.3 |
||
.1.3.6.1.4.1.9.9.592.1.2.2 |
||
.1.3.6.1.4.1.9.9.592.1.2.2.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.2.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.3 |
||
.1.3.6.1.4.1.9.9.592.1.2.3.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.3.1.1 |
||
.1.3.6.1.4.1.9.9.592.1.2.3.1.2 |
||
.1.3.6.1.4.1.9.9.592.1.2.3.1.3 |
||
.1.3.6.1.4.1.9.9.592.2 |
||
.1.3.6.1.4.1.9.9.592.2.1 |
||
.1.3.6.1.4.1.9.9.592.2.2 |
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-ST-TCcisco
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-VSAN-MIBcisco
- CISCO-PREFERRED-PATH-MIBciscoselected
Type Definitions (4)
| Enumeration |
full(1)domainArea(2)domain(3)noMask(4) |
|
| Unsigned32 |
range: 0..4093 |
|
| Unsigned32 |
range: 1..255 |
|
| Enumeration |
unknown(1)active(2)pending(3)deleted(4)changed(5) |
Conformance Groups (5)
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.592.2.1.1The compliance statement for entities which
implement the CISCO-PREFERRED-PATH-MIB.
implement the CISCO-PREFERRED-PATH-MIB.
Required groups
| mandatory | ciscoPrefPathConfigGroup | |
| mandatory | ciscoPrefPathInfoGroup | |
| mandatory | ciscoPrefPathNotifyGroup | |
| mandatory | ciscoPrefPathNotifyConfigGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cPrefPathRouteMapStorageType |
volatile(2)
|
Only one value 'volatile' out of the five enumerated values need to be supported. |
|
| cPrefPathRouteMapRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |
|
| cPrefPathRMapMatchRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |
|
| cPrefPathRMapSetRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |
OID
.1.3.6.1.4.1.9.9.592.2.1.2The compliance statement for entities which
implement the CISCO-PREFERRED-PATH-MIB.
implement the CISCO-PREFERRED-PATH-MIB.
Required groups
| mandatory | ciscoPrefPathConfigGroupRev1 | |
| mandatory | ciscoPrefPathInfoGroup | |
| mandatory | ciscoPrefPathNotifyGroup | |
| mandatory | ciscoPrefPathNotifyConfigGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cPrefPathRouteMapStorageType |
volatile(2)
|
Only one value 'volatile' out of the five enumerated values need to be supported. |
|
| cPrefPathRouteMapRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |
|
| cPrefPathRMapMatchRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |
|
| cPrefPathRMapSetRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.592.0.1 |
This notification is generated whenever the
local device encounters some hardware failures during programming of local preferred path configuration. |