CISCO-OSPF-MIB Table View

Information describing the configured parameters 
and cumulative statistics of the router's attached 
areas.

cospfAreaEntry row .1.3.6.1.4.1.9.10.99.2.1

Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas.

Indexes

No indexes recorded

Column	Syntax	OID
cospfOpaqueAreaLsaCount The total number of Opaque Area and AS link-state advertisements in the link state database of this area.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.2.1.1
cospfOpaqueAreaLsaCksumSum The 32-bit unsigned sum of the Opaque Area and AS link-state advertisements' LS checksums contained link state database of this area. The sum can be used to determine if there has been a change in the link state da…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.99.2.1.2
cospfAreaNssaTranslatorRole Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.	Enumeration Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.9.10.99.2.1.3
cospfAreaNssaTranslatorState Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object set to enabled, the NSSA Border router's cospfAreaNssaExtTranslatorRole has been set to always.…	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.9.10.99.2.1.4
cospfAreaNssaTranslatorEvents Indicates the number of Translator State changes that have occurred since the last boot-up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.2.1.5

The OSPF Process's Link State Database. This 
table is meant for Opaque LSA's

cospfLsdbEntry row .1.3.6.1.4.1.9.10.99.3.1

A single Link State Advertisement.

Indexes

OSPF-MIBospfLsdbAreaId cospfLsdbType OSPF-MIBospfLsdbLsid OSPF-MIBospfLsdbRouterId

Column	Syntax	OID
cospfLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 10 areaOpaqueLink 11 asOpaqueLink	.1.3.6.1.4.1.9.10.99.3.1.1
cospfLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the…	Integer32 Constraints: range: 1-147483647	.1.3.6.1.4.1.9.10.99.3.1.2
cospfLsdbAge This field is the age of the link state advertisement in seconds.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.99.3.1.3
cospfLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.99.3.1.4
cospfLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.99.3.1.5

The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF.

cospfIfEntry row .1.3.6.1.4.1.9.10.99.4.1

The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.

Indexes

No indexes recorded

Column	Syntax	OID
cospfIfLsaCount The total number of link-local link state advertisements in this interface's link-local link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.4.1.1
cospfIfLsaCksumSum The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link s…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.99.4.1.2

Information about this router's virtual inter-
faces.

cospfVirtIfEntry row .1.3.6.1.4.1.9.10.99.5.1

Information about a single Virtual Interface.

Indexes

No indexes recorded

Column	Syntax	OID
cospfVirtIfLsaCount The total number of link-local link state advertisements in this virtual interface's link-local link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.5.1.1
cospfVirtIfLsaCksumSum The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual int…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.99.5.1.2

The OSPF Process's Link-Local Link State Database
for non-virtual links.

cospfLocalLsdbEntry row .1.3.6.1.4.1.9.10.99.7.1

A single Link State Advertisement.

Indexes

cospfLocalLsdbIpAddress cospfLocalLsdbAddressLessIf cospfLocalLsdbType cospfLocalLsdbLsid cospfLocalLsdbRouterId

Column	Syntax	OID
cospfLocalLsdbIpAddress The IP Address of the interface from which the LSA was received if the interface is numbered.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.10.99.7.1.1
cospfLocalLsdbAddressLessIf The Interface Index of the interface from which the LSA was received if the interface is unnumbered.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.99.7.1.2
cospfLocalLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 9 localOpaqueLink	.1.3.6.1.4.1.9.10.99.7.1.3
cospfLocalLsdbLsid The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.10.99.7.1.4
cospfLocalLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.9.10.99.7.1.5
cospfLocalLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent t…	Integer32 Constraints: range: -2147483647-2147483647	.1.3.6.1.4.1.9.10.99.7.1.6
cospfLocalLsdbAge This field is the age of the link state advertisement in seconds.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.9.10.99.7.1.7
cospfLocalLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum …	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.99.7.1.8
cospfLocalLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.99.7.1.9

The OSPF Process's Link-Local Link State Database
for virtual links.

cospfVirtLocalLsdbEntry row .1.3.6.1.4.1.9.10.99.8.1

A single Link State Advertisement.

Indexes

cospfVirtLocalLsdbTransitArea cospfVirtLocalLsdbNeighbor cospfVirtLocalLsdbType cospfVirtLocalLsdbLsid cospfVirtLocalLsdbRouterId

Column	Syntax	OID
cospfVirtLocalLsdbTransitArea The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.9.10.99.8.1.1
cospfVirtLocalLsdbNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.9.10.99.8.1.2
cospfVirtLocalLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 9 localOpaqueLink	.1.3.6.1.4.1.9.10.99.8.1.3
cospfVirtLocalLsdbLsid The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.10.99.8.1.4
cospfVirtLocalLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.9.10.99.8.1.5
cospfVirtLocalLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent…	Integer32 Constraints: range: -2147483647-2147483647	.1.3.6.1.4.1.9.10.99.8.1.6
cospfVirtLocalLsdbAge This field is the age of the link state advertisement in seconds.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.9.10.99.8.1.7
cospfVirtLocalLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum …	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.99.8.1.8
cospfVirtLocalLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.99.8.1.9

A table of sham link neighbor information.

cospfShamLinkNbrEntry row .1.3.6.1.4.1.9.10.99.10.1

Sham link neighbor information.

Indexes

cospfShamLinksLocalIpAddrType cospfShamLinksLocalIpAddr cospfShamLinkNbrArea cospfShamLinkNbrIpAddrType cospfShamLinkNbrIpAddr

Column	Syntax	OID
cospfShamLinkNbrArea The area to which the sham link is part of.	OSPF-MIBAreaID	.1.3.6.1.4.1.9.10.99.10.1.1
cospfShamLinkNbrIpAddrType The type of internet address of this sham link neighbor's IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.99.10.1.2
cospfShamLinkNbrIpAddr The IP address this sham link neighbor is using.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.99.10.1.3
cospfShamLinkNbrRtrId A 32-bit integer uniquely identifying the neighboring router.	OSPF-MIBRouterID	.1.3.6.1.4.1.9.10.99.10.1.4
cospfShamLinkNbrOptions A Bit Mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all me…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.10.99.10.1.5
cospfShamLinkNbrState The state of this sham link neighbor relation- ship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.9.10.99.10.1.6
cospfShamLinkNbrEvents The number of times this sham link has changed state or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.10.1.7
cospfShamLinkNbrLsRetransQLen The current length of the retransmission queue. The retransmission queue is maintained for LSAs that have been flooded but not acknowledged on this adjacency.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.10.1.8
cospfShamLinkNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.99.10.1.9

Information about this router's sham links.

cospfShamLinksEntry row .1.3.6.1.4.1.9.10.99.11.1

Information about a single sham link.

Indexes

cospfShamLinksAreaId cospfShamLinksLocalIpAddrType cospfShamLinksLocalIpAddr cospfShamLinksRemoteIpAddrType cospfShamLinksRemoteIpAddr

Column	Syntax	OID
cospfShamLinksAreaId The area that this sham link is part of.	OSPF-MIBAreaID	.1.3.6.1.4.1.9.10.99.11.1.1
cospfShamLinksLocalIpAddrType The type of internet address of this sham link's local IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.99.11.1.2
cospfShamLinksLocalIpAddr The Local IP address of the sham link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.99.11.1.3
cospfShamLinksRemoteIpAddrType The type of internet address of this sham link's remote IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.99.11.1.4
cospfShamLinksRemoteIpAddr The IP address of the other end router of the sham link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.99.11.1.5
cospfShamLinksRetransInterval The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this link. This value is also used when retransmitting database description and link-state request packets. This va…	OSPF-MIBUpToMaxAge Type Constraints: range: 0..3600	.1.3.6.1.4.1.9.10.99.11.1.6
cospfShamLinksHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the sham link.	OSPF-MIBHelloRange Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.10.99.11.1.7
cospfShamLinksRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval.	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.10.99.11.1.8
cospfShamLinksState OSPF sham link states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.9.10.99.11.1.9
cospfShamLinksEvents The number of state changes or error events on this sham link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99.11.1.10
cospfShamLinksMetric The Metric to be advertised.	OSPF-MIBMetric Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.99.11.1.11