CISCO-OPTICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
135

coiOpticalControllerTable

table
.1.3.6.1.4.1.9.9.828.1.1.2 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiOpticalControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MIB::coiOpticalControllerTable' 
This table provides management information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195).
coiOpticalControllerEntry row .1.3.6.1.4.1.9.9.828.1.1.2.1
An entry containing management information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature when a
new interface is added to the ifTable.
Indexes
Column Syntax OID
coiOpticalControllerWavelength
This object is used to configure the wavelength on
optical channel interfaces in 1/100 nm.
1/100 nmCoiOpticalWavelengthr/w
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.828.1.1.2.1.1
coiOpticalControllerLaserStatus
This object gives the current operational state of the Laser.
Valid values are -
'up' - The laser is operational.
'down' - The laser is not operational.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.9.9.828.1.1.2.1.2
coiOpticalControllerFrequency
This object is used to configure the frequency on optical
channel interfaces in 100 MHz.
100 MHzSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.828.1.1.2.1.3
coiOpticalControllerChannelNumber
This object is used to configure the channel number on
optical channel interfaces. Channel Number is set to 0 if not
50GHz grid.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.828.1.1.2.1.4
coiOpticalControllerTransmitPower
This object is used to configure the Transmit Power in
1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.5
coiOpticalControllerOpticsType
This object gives the description of optics present on optical
channel interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.828.1.1.2.1.6
coiOpticalControllerRXLowThreshold
This object is used to configure the Receive Low Threshold in
1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.7
coiOpticalControllerTXLowThreshold
This object is used to configure the Transmit Low Threshold in
1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.8
coiOpticalControllerRXHighThreshold
This object is used to configure the Receive High Threshold in
1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.9
coiOpticalControllerTXHighThreshold
This object is used to configure the Transmit High Threshold
in 1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.10
coiOpticalControllerLBCHighThreshold
This object is used to configure the Laser Bias Current High
Threshold in 1/10% on optical channel interfaces.
1/10 %Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.11
coiOpticalControllerStatus
This object indicates the current defect status of the Optics
layer.
noDefect(0): No Defect. This bit is set high when no
defect is detected on the optics.
improprmvl(1): Improper Removal. T…
Bits
Enumerated Values:
0noDefect
1improprmvl
2mea
3provMismatch
4highRXPwr
5highTXPwr
6lowRXPwr
7lowTXPwr
8highLBC
9highDGD
10outOfRangeCD
11lowOSNR
12wvlOutOfLock
13highLaserTemp
14lowLaserTemp
15ppmFail
 .1.3.6.1.4.1.9.9.828.1.1.2.1.12
coiOpticalControllerPortType
This object gives the port type of the optical interface.
CoiPortType
Type Values:
1clientPort
2trunkPort
 .1.3.6.1.4.1.9.9.828.1.1.2.1.13
coiOpticalControllerTotalRXPower
This object is used to configure the total receive power in
1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.14
coiOpticalControllerTotalTXPower
This object is used to configure the total transmit power
in 1/100 dBm on optical channel interfaces.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.2.1.15

coiOpticalControllerPerLaneTable

table
.1.3.6.1.4.1.9.9.828.1.1.3 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiOpticalControllerPerLaneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MIB::coiOpticalControllerPerLaneTable' 
This table provides the management information for optical
layer related attributes of interfaces with an ifType of
opticalChannel(195) and lane number as
coiOpticalControllerLane.
coiOpticalControllerPerLaneEntry row .1.3.6.1.4.1.9.9.828.1.1.3.1
An entry containing management information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195) and lane number as
coiOpticalControllerLane. Entries are created by the feature
when a new …
Indexes
Column Syntax OID
coiOpticalControllerLane
This object specifies the lane number for the optical
controller. Each optical controller is divided into data lanes,
with each lane operating at some data rate, giving an aggregated
bandwidth of the controller, as a wh…
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.9.9.828.1.1.3.1.1
coiOpticalControllerPerLaneRXPower
This object specifies the Receive power in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.3.1.2
coiOpticalControllerPerLaneTXPower
This object specifies the Transmit power in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.1.3.1.3
coiOpticalControllerPerLaneLBC
This object specifies the Laser Bias Current in 1/10%.
1/10 %Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.1.3.1.4
coiOpticalControllerPerLaneOSNR
This object specifies the Optical Signal to Noise Ratio in
1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.5
coiOpticalControllerPerLaneChromaticDispersion
This object specifies the measure of spread of light pulse
in ps/nm.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.6
coiOpticalControllerPerLaneDifferentialGroupDelay
This object specifies the propagation time difference
between eigenmodes X and Y in 1/100 ps.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.7
coiOpticalControllerPerLaneSecondOrderPMD
This object specifies the threshold Second Order Polarization
Mode Dispersion in 1/100 ps^2.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.8
coiOpticalControllerPerLanePolarizationDependentLoss
This object specifies the threshold Polarization Dependent
Loss in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.9
coiOpticalControllerPerLanePolarizationChangeRate
This object specifies the Polarization Change Rate in
1/100 rad/s.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.10
coiOpticalControllerPerLanePhaseNoise
This object specifies the Fluctuations in the Phase of a
Waveform in 1/1000 dB.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.1.3.1.11

coiOpticalThresholdTable

table
.1.3.6.1.4.1.9.9.828.1.2.1 · 1 row entry · 41 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiOpticalThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MIB::coiOpticalThresholdTable' 
This table provides threshold information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195) and Interval type as
coiOptThreshIntervalType.
coiOpticalThresholdEntry row .1.3.6.1.4.1.9.9.828.1.2.1.1
An entry containing threshold information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature
when a new interface is added to the ifTable.
Indexes
Column Syntax OID
coiOptThreshIntervalType
This object gives the interval type during which the
performance statistics are accumulated for the interface.
CoiIntervalType
Type Values:
1fifteenMin
2oneDay
3thirtySecond
 .1.3.6.1.4.1.9.9.828.1.2.1.1.1
coiOptThreshTXPowerMin
This object is used to configure the threshold of minimum
Transmit power for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.1.1.2
coiOptThreshRXPowerMin
This object is used to configure the threshold of minimum
Receive power for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.1.1.3
coiOptThreshOSNRMin
This object is used to configure the threshold of minimum
Optical Signal to Noise Ratio for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.4
coiOptThreshChromaticDispersionMin
This object is used to configure the threshold of minimum
measure of spread of light pulse for the interface in ps/nm.
ps/nmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.5
coiOptThreshDifferentialGroupDelayMin
This object is used to configure the threshold of minimum
propagation time difference between eigenmodes X and Y for the
interface in 1/100 ps.
1/100 psSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.6
coiOptThreshSecondOrderPMDMin
This object is used to configure the threshold of minimum
Second Order Polarization Mode Dispersion for the interface in
1/100 ps^2.
1/100 ps^2SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.7
coiOptThreshPolarizationDependentLossMin
This object is used to configure the threshold of minimum
Polarization Dependent Loss for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.8
coiOptThreshPolarizationChangeRateMin
This object is used to configure the threshold of minimum
Polarization Change Rate for the interface in 1/100 rad/s.
1/100 rad/sSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.9
coiOptThreshPhaseNoiseMin
This object is used to configure the threshold of minimum
Fluctuations in the Phase of a Waveform for the interface in
1/1000 dB.
1/1000 dBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.10
coiOptThreshLBCMin
This object is used to configure the threshold of minumum
Laser Bias Current in 1/10%.
1/10 %Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.2.1.1.11
coiOptThreshTXPowerMax
This object is used to configure the threshold of maximum
Transmit power for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.1.1.12
coiOptThreshRXPowerMax
This object is used to configure the threshold of maximum
Receive power for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.1.1.13
coiOptThreshOSNRMax
This object is used to configure the threshold of maximum
Optical Signal to Noise Ratio for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.14
coiOptThreshChromaticDispersionMax
This object is used to configure the threshold of maximum
measure of spread of light pulse for the interface in ps/nm.
ps/nmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.15
coiOptThreshDifferentialGroupDelayMax
This object is used to configure the threshold of maximum
propagation time difference between eigenmodes X and Y for the
interface in 1/100 ps.
1/100 psSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.16
coiOptThreshSecondOrderPMDMax
This object is used to configure the threshold of maximum
Second Order Polarization Mode Dispersion for the interface in
1/100 ps^2.
1/100 ps^2SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.17
coiOptThreshPolarizationDependentLossMax
This object is used to configure the threshold of maximum
Polarization Dependent Loss for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.18
coiOptThreshPolarizationChangeRateMax
This object is used to configure the threshold of maximum
Polarization Change Rate in 1/100 rad/s for the interface.
1/100 rad/sSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.19
coiOptThreshPhaseNoiseMax
This object is used to configure the threshold of maximum
Fluctuations in the Phase of a Waveform in 1/1000 dB for the
interface.
1/1000 dBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.1.1.20
coiOptThreshLBCMax
This object is used to configure the threshold of maximum
Laser Bias Current in 1/10 % for the interface.
1/10 %Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.2.1.1.21
coiOptThreshTXPowerEnableMin
This object is used to configure the enablement of threshold
min Transmit power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.22
coiOptThreshRXPowerEnableMin
This object is used to configure the enablement of the
threshold min Receive power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.23
coiOptThreshOSNREnableMin
This object is used to configure the enablement of the
threshold min Optical Signal to Noise Ratio for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.24
coiOptThreshChromaticDispersionEnableMin
This object is used to configure the enablement of the
threshold min measure of spread of light pulse for the
interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.25
coiOptThreshDifferentialGroupDelayEnableMin
This object is used to configure the enablement of the
threshold min propagation time difference between eigenmodes X
and Y for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.26
coiOptThreshSecondOrderPMDEnableMin
This object is used to configure the enablement of the
threshold min Second Order Polarization Mode Dispersion for
the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.27
coiOptThreshPolarizationDependentLossEnableMin
This object is used to configure the enablement of the
threshold min Polarization Dependent Loss for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.28
coiOptThreshPolarizationChangeRateEnableMin
This object is used to configure the enablement of the
threshold min Polarization Change Rate for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.29
coiOptThreshPhaseNoiseEnableMin
This object is used to configure the enablement of the
threshold min Fluctuations in the Phase of a Waveform for the
interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.30
coiOptThreshLBCEnableMin
This object is used to configure the enablement of the
threshold min Laser Bias Current for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.31
coiOptThreshTXPowerEnableMax
This object is used to configure the enablement of the
threshold max Transmit power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.32
coiOptThreshRXPowerEnableMax
This object is used to configure the enablement of the
threshold max Receive power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.33
coiOptThreshOSNREnableMax
This object is used to configure the enablement of the
threshold max Optical Signal to Noise Ratio for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.34
coiOptThreshChromaticDispersionEnableMax
This object is used to configure the enablement of the
threshold max measure of spread of light pulse for the
interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.35
coiOptThreshDifferentialGroupDelayEnableMax
This object is used to configure the enablement of the
threshold max propagation time difference between eigenmodes
X and Y for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.36
coiOptThreshSecondOrderPMDEnableMax
This object is used to configure the enablement of the
threshold max Second Order Polarization Mode Dispersion for the
interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.37
coiOptThreshPolarizationDependentLossEnableMax
This object is used to configure the enablement of the
threshold max Polarization Dependent Loss for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.38
coiOptThreshPolarizationChangeRateEnableMax
This object is used to configure the enablement of the
threshold max Polarization Change Rate for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.39
coiOptThreshPhaseNoiseEnableMax
This object is used to configure the enablement of the
threshold max Fluctuations in the Phase of a Waveform for the
interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.40
coiOptThreshLBCEnableMax
This object is used to configure the enablement of the
threshold max Laser Bias Current for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.828.1.2.1.1.41

coiOpticalCurrentTable

table
.1.3.6.1.4.1.9.9.828.1.2.2 · 1 row entry · 33 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiOpticalCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MIB::coiOpticalCurrentTable' 
This table provides current information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195), Lane as coiOptCurrentLane and Interval
as coiOptCurrentIntervalType.
coiOpticalCurrentEntry row .1.3.6.1.4.1.9.9.828.1.2.2.1
An entry containing current information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature when
a new interface is added to the ifTable.
Indexes
Column Syntax OID
coiOptCurrentLane
This object specifies the lane number for the optical
interface. Each optical controller is divided into data lanes
with each lane operating at some data rate, giving an
aggregated bandwidth of the controller as a whole…
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.9.9.828.1.2.2.1.1
coiOptCurrentIntervalType
This object gives the interval type during which the
current performance statistics are accumulated.
CoiIntervalType
Type Values:
1fifteenMin
2oneDay
3thirtySecond
 .1.3.6.1.4.1.9.9.828.1.2.2.1.2
coiOptCurrentTXPowerMax
This object specifies the current max Transmit power
for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.3
coiOptCurrentRXPowerMax
This object specifies the current max Receive power for the
interface in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.4
coiOptCurrentOSNRMax
This object specifies the current max Optical Signal to Noise
Ratio for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.5
coiOptCurrentChromaticDispersionMax
This object specifies the current max measure of spread of
light pulse for the interface in ps/nm.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.6
coiOptCurrentDifferentialGroupDelayMax
This object specifies the current max propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.7
coiOptCurrentSecondOrderPMDMax
This object specifies the current max Second Order
Polarization Mode Dispersion for the interface in 1/100 ps^2.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.8
coiOptCurrentPolarizationDependentLossMax
This object specifies the current max Polarization Dependent
Loss for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.9
coiOptCurrentPolarizationChangeRateMax
This object specifies the current max Polarization Change
Rate for the interface in 1/100 rad/s.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.10
coiOptCurrentPhaseNoiseMax
This object specifies the current max Fluctuations in the
Phase of a Waveform for the interface in 1/1000 dB.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.11
coiOptCurrentLBCMax
This object specifies the current max Laser Bias Current in
1/10% for the interface.
1/10 %Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.12
coiOptCurrentTXPowerMin
This object specifies the current min Transmit power for the
interface in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.13
coiOptCurrentRXPowerMin
This object specifies the current min Receive power for the
interface in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.14
coiOptCurrentOSNRMin
This object specifies the current min Optical Signal to Noise
Ratio for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.15
coiOptCurrentChromaticDispersionMin
This object specifies the current min measure of spread of
light pulse for the interface in ps/nm.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.16
coiOptCurrentDifferentialGroupDelayMin
This object specifies the current min propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.17
coiOptCurrentSecondOrderPMDMin
This object specifies the current min Second Order
Polarization Mode Dispersion for the interface in 1/100 ps^2.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.18
coiOptCurrentPolarizationDependentLossMin
This object specifies the current min Polarization Dependent
Loss for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.19
coiOptCurrentPolarizationChangeRateMin
This object specifies the current min Polarization Change Rate
for the interface in 1/100 rad/s.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.20
coiOptCurrentPhaseNoiseMin
This object specifies the current min Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.21
coiOptCurrentLBCMin
This object specifies the current min Laser Bias Current in
1/10% for the interface.
1/10 %Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.22
coiOptCurrentTXPowerAvg
This object specifies the current average Transmit power
for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.23
coiOptCurrentRXPowerAvg
This object specifies the current average Receive power
for the interface in 1/100 dBm.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.24
coiOptCurrentOSNRAvg
This object specifies the current average Optical Signal to
Noise Ratio for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.25
coiOptCurrentChromaticDispersionAvg
This object specifies the current average measure of spread of
light pulse for the interface in ps/nm.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.26
coiOptCurrentDifferentialGroupDelayAvg
This object specifies the current average propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.27
coiOptCurrentSecondOrderPMDAvg
This object specifies the current average Second Order
Polarization Mode Dispersion for the interface in 1/100 ps^2.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.28
coiOptCurrentPolarizationDependentLossAvg
This object specifies the current average Polarization
Dependent Loss for the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.29
coiOptCurrentPolarizationChangeRateAvg
This object specifies the current average Polarization Change
Rate for the interface in 1/100 rad/s.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.30
coiOptCurrentPhaseNoiseAvg
This object specifies the current average Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.2.1.31
coiOptCurrentLBCAvg
This object specifies the current average Laser Bias Current
in 1/10% for the interface.
1/10 %Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.828.1.2.2.1.32
coiOptCurrentTimestamp
This object specifies the timestamp for
the current bucket for the interface.
OctetString .1.3.6.1.4.1.9.9.828.1.2.2.1.33

coiOpticalIntervalTable

table
.1.3.6.1.4.1.9.9.828.1.2.3 · 1 row entry · 34 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiOpticalIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MIB::coiOpticalIntervalTable' 
This table provides interval information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195), lane as coiOptIntervalLane, Interval as
coiOptIntervalIntervalType and history bucket as
coiOptIntervalIntervalType.
coiOpticalIntervalEntry row .1.3.6.1.4.1.9.9.828.1.2.3.1
An entry containing interval information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature when a
new interface is added to the ifTable.
Indexes
Column Syntax OID
coiOptIntervalLane
This object specifies the lane number for the optical
interface. Each optical controller is divided into data lanes
with each lane operating at some data rate, giving an aggregated
bandwidth of the controller as a whole…
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.9.9.828.1.2.3.1.1
coiOptIntervalIntervalType
This object gives the interval type during which the
performance statistics are accumulated.
CoiIntervalType
Type Values:
1fifteenMin
2oneDay
3thirtySecond
 .1.3.6.1.4.1.9.9.828.1.2.3.1.2
coiOptIntervalNum
This object identifies the interval for which the set of
interval performance values is available.
The interval identified by 1 is the most recent 15 minute
or 24 hour interval, and the interval identified by N is
the i…
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.828.1.2.3.1.3
coiOptIntervalTXPowerMax
This object specifies the interval maximum Transmit power in
1/100 dBm for the interface.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.3.1.4
coiOptIntervalRXPowerMax
This object specifies the interval maximum Receive power in
1/100 dBm for the interface.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.3.1.5
coiOptIntervalOSNRMax
This object specifies the interval maximum Optical Signal to
Noise Ratio in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.6
coiOptIntervalChromaticDispersionMax
This object specifies the interval maximum measure of spread
of light pulse for the interface in ps/nm.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.7
coiOptIntervalDifferentialGroupDelayMax
This object specifies the interval maximum propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.8
coiOptIntervalSecondOrderPMDMax
This object specifies the interval maximum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.9
coiOptIntervalPolarizationDependentLossMax
This object specifies the interval maximum Polarization
Dependent Loss in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.10
coiOptIntervalPolarizationChangeRateMax
This object specifies the interval maximum Polarization Change
Rate in 1/100 rad/s for the interface.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.11
coiOptIntervalPhaseNoiseMax
This object specifies the interval maximum Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.12
coiOptIntervalLBCMax
This object specifies the interval maximum Laser Bias Current
in 1/10% for the interface.
1/10 %SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.13
coiOptIntervalTXPowerMin
This object specifies the interval minimum Transmit power in
1/100 dBm for the interface.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.3.1.14
coiOptIntervalRXPowerMin
This object specifies the interval minimum Receive power in
1/100 dBm for the interface.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.3.1.15
coiOptIntervalOSNRMin
This object specifies the interval minimum Optical Signal to
Noise Ratio in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.16
coiOptIntervalChromaticDispersionMin
This object specifies the interval minimum measure of spread
of light pulse in ps/nm for the interface.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.17
coiOptIntervalDifferentialGroupDelayMin
This object specifies the interval minimum propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.18
coiOptIntervalSecondOrderPMDMin
This object specifies the interval minimum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.19
coiOptIntervalPolarizationDependentLossMin
This object specifies the interval minimum Polarization
Dependent Loss in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.20
coiOptIntervalPolarizationChangeRateMin
This object specifies the interval minimum Polarization Change
Rate in 1/100 rad/s for the interface.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.21
coiOptIntervalPhaseNoiseMin
This object specifies the interval minimum Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.22
coiOptIntervalLBCMin
This object specifies the interval minimum Laser Bias Current
in 1/10% for the interface.
1/10 %SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.23
coiOptIntervalTXPowerAvg
This object specifies the interval average Transmit power in
1/100 dBm for the interface.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.3.1.24
coiOptIntervalRXPowerAvg
This object specifies the interval average Receive power in
1/100 dBm for the interface.
1/100 dBmCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.828.1.2.3.1.25
coiOptIntervalOSNRAvg
This object specifies the interval average Optical Signal to
Noise Ratio in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.26
coiOptIntervalChromaticDispersionAvg
This object specifies the interval average measure of spread
of light pulse in ps/nm for the interface.
ps/nmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.27
coiOptIntervalDifferentialGroupDelayAvg
This object specifies the interval average propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface.
1/100 psSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.28
coiOptIntervalSecondOrderPMDAvg
This object specifies the interval average Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface.
1/100 ps^2SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.29
coiOptIntervalPolarizationDependentLossAvg
This object specifies the interval average Polarization
Dependent Loss in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.30
coiOptIntervalPolarizationChangeRateAvg
This object specifies the interval average Polarization Change
Rate in 1/100 rad/s for the interface.
1/100 rad/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.31
coiOptIntervalPhaseNoiseAvg
This object specifies the interval average Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface.
1/1000 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.32
coiOptIntervalLBCAvg
This object specifies the interval average Laser Bias Current
in 1/10 % for the interface.
1/10 %SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.828.1.2.3.1.33
coiOptIntervalTimestamp
This object specifies the timestamp, for the bucket specified
by 'coiOptIntervalNum', for the interface.
OctetString .1.3.6.1.4.1.9.9.828.1.2.3.1.34

coiOpticalClientInfoTable

table
.1.3.6.1.4.1.9.9.828.1.3 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiOpticalClientInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MIB::coiOpticalClientInfoTable' 
This table provides management information for optical's
client layer related attributes of interfaces with an ifType
of ethernetCsmacd(6).This parameter is applicable only for
client interfaces.
coiOpticalClientInfoEntry row .1.3.6.1.4.1.9.9.828.1.3.1
An entry containing information for optical's
client layer related attributes of interfaces with an ifType
of ethernetCsmacd(6). Entries are created by the feature when
the interface discovers the neighbour's ethernet M…
Indexes
Column Syntax OID
coiOpticalClientEthernetNeighbourMAC
This object gives the neighbour MAC Address to which the
interface is connected.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.828.1.3.1.1