CISCO-MSATA-MIB

        As part of this enhancement, adding SNMP support for below 2
mSata parameters on the IR829M products:
1) Lifetime remaining (wear leveling)
2) Memory usage for the mSATA SSD
        
This feature is supported in IR829M only.
        
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
        
Wl      -   Wear Leveling of mSATA SSD
    
Source file
CISCO-MSATA-MIB
Last revised
Identity
ciscoMsataMIB
Base OID
1.3.6.1.4.1.9.9.860
Imported Objects
CISCO-SMI ciscoMgmt
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MSATA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MSATA-MIB::ciscoMsataMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MSATA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MSATA-MIB::ciscoMsataMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (3)
.1.3.6.1.4.1.9.9.860
.1.3.6.1.4.1.9.9.860.0
OctetString
.1.3.6.1.4.1.9.9.860.0.1
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. CISCO-MSATA-MIBciscoselected