Standard view Table view

CISCO-MPLS-LSR-EXT-STD-MIB

        Copyright (c) 2012 IETF Trust and the persons identified
as the document authors.  All rights reserved.
        
This MIB module contains generic object definitions for
        
        
MPLS LSR in transport networks.

Source file: CISCO-MPLS-LSR-EXT-STD-MIB
Last revised: 30 Apr 2012, 00:00 UTC
Identity: cmplsLsrExtStdMIB
Base OID: 1.3.6.1.4.1.9.10.145

Imported Objects

CISCO-SMI	ciscoExperiment
MPLS-LSR-STD-MIB	mplsInSegmentGroup (no object page) mplsInterfaceGroup (no object page) mplsLsrNotificationGroup (no object page) mplsOutSegmentGroup (no object page) mplsPerfGroup (no object page) mplsXCGroup (no object page) mplsXCIndex mplsXCInSegmentIndex mplsXCOutSegmentIndex
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	RowPointer

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MPLS-LSR-EXT-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MPLS-LSR-EXT-STD-MIB::cmplsLsrExtStdMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MPLS-LSR-EXT-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MPLS-LSR-EXT-STD-MIB::cmplsLsrExtStdMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (10)

cmplsLsrExtStdMIB		`.1.3.6.1.4.1.9.10.145`
cmplsLsrExtNotifications		`.1.3.6.1.4.1.9.10.145.0`
cmplsLsrExtObjects		`.1.3.6.1.4.1.9.10.145.1`
cmplsXCExtTable		`.1.3.6.1.4.1.9.10.145.1.1`
cmplsXCExtEntry	MPLS-LSR-STD-MIBmplsXCIndexMPLS-LSR-STD-MIBmplsXCInSegmentIndexMPLS-LSR-STD-MIBmplsXCOutSegmentIndex	`.1.3.6.1.4.1.9.10.145.1.1.1`
cmplsXCExtTunnelPointer r/w	SNMPv2-TCRowPointer	`.1.3.6.1.4.1.9.10.145.1.1.1.1`
cmplsXCOppositeDirXCPtr r/w	SNMPv2-TCRowPointer	`.1.3.6.1.4.1.9.10.145.1.1.1.2`
cmplsLsrExtConformance		`.1.3.6.1.4.1.9.10.145.2`
cmplsLsrExtGroups		`.1.3.6.1.4.1.9.10.145.2.1`
cmplsLsrExtCompliances		`.1.3.6.1.4.1.9.10.145.2.2`

Dependencies (11) 5 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-MPLS-LSR-EXT-STD-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- MPLS-LSR-STD-MIBrfcdefault fallback9 symbols
  - IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - IF-MIBrfc3 symbols
    - IANAifType-MIBrfc1 symbol
      - SNMPv2-SMIrfcshared2 symbols
      - SNMPv2-TCrfcshared1 symbol
    - SNMPv2-CONFrfc3 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-MIBrfc1 symbol
      - SNMPv2-CONFrfcshared3 symbols
      - SNMPv2-SMIrfcshared7 symbols
      - SNMPv2-TCrfcshared3 symbols
    - SNMPv2-SMIrfcshared9 symbols
    - SNMPv2-TCrfcshared8 symbols
  - INET-ADDRESS-MIBrfc2 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - MPLS-TC-STD-MIBrfc5 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared6 symbols
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared2 symbols
- SNMPv2-TCrfcdefault fallbackshared1 symbol

Dependency-first compile order

Conformance Groups (1)

cmplsXCExtGroup	cmplsXCExtTunnelPointer cmplsXCOppositeDirXCPtr This object should be supported in order to access the tunnel entry from XC entry.	`.1.3.6.1.4.1.9.10.145.2.1.1`

Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.145.2.2.1

Compliance statement for agents that provide full support

for MPLS-LSR-EXT-STD-MIB.
The mandatory group has to be implemented by all LSRs
that originate, terminate, or act as transit for
TE-LSPs/tunnels.
In addition, depending on the type of tunnels supported,
other groups become mandatory as explained below.

Required groups

mandatory	MPLS-LSR-STD-MIB::mplsInSegmentGroup
mandatory	MPLS-LSR-STD-MIB::mplsOutSegmentGroup
mandatory	MPLS-LSR-STD-MIB::mplsXCGroup
mandatory	MPLS-LSR-STD-MIB::mplsPerfGroup
mandatory	MPLS-LSR-STD-MIB::mplsLsrNotificationGroup
mandatory	cmplsXCExtGroup

Object refinements

Object	Access	Syntax	Description
cmplsXCExtTunnelPointer	readonly	SNMPv2-TCRowPointer	The only valid value for Tunnel Pointer is mplsTunnelTable entry.

OID .1.3.6.1.4.1.9.10.145.2.2.2

Compliance requirement for implementations that only
provide read-only support for MPLS-LSR-EXT-STD-MIB.
Such devices can then be monitored but cannot be
configured using this MIB module.