CISCO-MMAIL-DIAL-CONTROL-MIB
This MIB module enhances the IETF Dial Control MIB
(RFC2128) for providing management of dial peers on
both a circuit-switched telephony network, and a mail
server on IP network.
- Source file
CISCO-MMAIL-DIAL-CONTROL-MIB- Last revised
- Identity
ciscoMediaMailDialControlMIB- Base OID
1.3.6.1.4.1.9.9.102
Imported Objects
| CISCO-DIAL-CONTROL-MIB | cCallHistoryIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-VOICE-COMMON-DIAL-CONTROL-MIB | CvcGUid |
| DIAL-CONTROL-MIB | AbsoluteCounter32 callActiveIndex callActiveSetupTime |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MMAIL-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MMAIL-DIAL-CONTROL-MIB::ciscoMediaMailDialControlMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MMAIL-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MMAIL-DIAL-CONTROL-MIB::ciscoMediaMailDialControlMIB'
Objects (51)
Showing 51 of 51 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.102 |
||
.1.3.6.1.4.1.9.9.102.1 |
||
.1.3.6.1.4.1.9.9.102.1.1 |
||
.1.3.6.1.4.1.9.9.102.1.1.1 |
||
.1.3.6.1.4.1.9.9.102.1.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.102.1.1.1.1.1 |
|
.1.3.6.1.4.1.9.9.102.1.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.102.1.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.102.1.1.1.1.4 |
||
.1.3.6.1.4.1.9.9.102.1.1.1.1.5 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.102.1.1.1.1.6 |
|
.1.3.6.1.4.1.9.9.102.1.2 |
||
.1.3.6.1.4.1.9.9.102.1.2.1 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.10 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.102.1.2.1.1.11 |
|
.1.3.6.1.4.1.9.9.102.1.2.1.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.102.1.2.1.1.3 |
|
.1.3.6.1.4.1.9.9.102.1.2.1.1.4 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.5 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.6 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.7 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.8 |
||
.1.3.6.1.4.1.9.9.102.1.2.1.1.9 |
||
.1.3.6.1.4.1.9.9.102.1.3 |
||
.1.3.6.1.4.1.9.9.102.1.3.1 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.1 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.10 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.102.1.3.1.1.11 |
|
.1.3.6.1.4.1.9.9.102.1.3.1.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.102.1.3.1.1.3 |
|
.1.3.6.1.4.1.9.9.102.1.3.1.1.4 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.5 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.6 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.7 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.8 |
||
.1.3.6.1.4.1.9.9.102.1.3.1.1.9 |
||
.1.3.6.1.4.1.9.9.102.1.4 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.102.1.4.1 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.102.1.4.2 |
|
.1.3.6.1.4.1.9.9.102.1.4.3 |
||
.1.3.6.1.4.1.9.9.102.1.4.4 |
||
.1.3.6.1.4.1.9.9.102.1.4.5 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.102.1.4.6 |
|
.1.3.6.1.4.1.9.9.102.1.4.7 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.102.1.4.8 |
|
.1.3.6.1.4.1.9.9.102.3 |
||
.1.3.6.1.4.1.9.9.102.3.1 |
||
.1.3.6.1.4.1.9.9.102.3.2 |
Dependencies (14) 8 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- DIAL-CONTROL-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-DIAL-CONTROL-MIBcisco
- CISCO-VOICE-COMMON-DIAL-CONTROL-MIBcisco
- CISCO-MMAIL-DIAL-CONTROL-MIBciscoselected
Type Definitions (5)
| OctetString |
range: 0..80 |
|
| Enumeration |
modifiedHuffman(2)modifiedREAD(3)modifiedMR(4) |
|
| Enumeration |
transparent(1)modifiedHuffman(2)modifiedREAD(3)modifiedMR(4) |
|
| Enumeration |
standard(2)fine(3)superFine(4) |
|
| Enumeration |
transparent(1)standard(2)fine(3)superFine(4) |
Conformance Groups (4)
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.102.3.1.1The compliance statement for entities which
implement the CISCO MMAIL DIAL CONTROL MIB
implement the CISCO MMAIL DIAL CONTROL MIB
Required groups
| optional | cmmdcPeerCfgGroup |
This group is mandatory for dial peer configuration which is related to Media Mail. |
| optional | cmmIpCallGeneralGroup |
This group is mandatory for general Media Mail related active call and call history via IP network. |
| optional | cmmIpCallImageGroup |
This group is mandatory for Image related Media Mail related active call and call history via IP network. |
| optional | cmmFaxGroup |
This group is mandatory for store and forward FAX general configuration. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cmmFaxCfgFaxProfile | readonly | Only the defalut value 'profileF ' is allowed. Write access is not required. |