Standard view Table view

CISCO-MGX82XX-DSX3-BERT-MIB

        The MIB Module for BERT (Bit Error Rate Testing)
on ds3 interfaces in some of the cards (Service Modules)
in MGX products.
        
This MIB is applicable for following T3/E3 Service Modules:
  FRSM-2T3E3 : Frame Relay Service Module.
  CESM-T3E3  : Circuit Emulation Service Module.
Source file
CISCO-MGX82XX-DSX3-BERT-MIB
Last revised
Identity
ciscoMgx82xxDsx3BertMIB
Base OID
1.3.6.1.4.1.351.150.39
Imported Objects
BASIS-MIB axisDiagnostics
CISCOWAN-SMI ciscoWan
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC DisplayString
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MGX82XX-DSX3-BERT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MGX82XX-DSX3-BERT-MIB::ciscoMgx82xxDsx3BertMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-DSX3-BERT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-DSX3-BERT-MIB::ciscoMgx82xxDsx3BertMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (25)
dsx3bert
.1.3.6.1.4.1.351.110.6.2
dsx3bertControl r/w
Enumeration
 .1.3.6.1.4.1.351.110.6.2.1
dsx3bertPattern r/w
Enumeration
 .1.3.6.1.4.1.351.110.6.2.10
dsx3bertLoopback r/w
Enumeration
 .1.3.6.1.4.1.351.110.6.2.11
dsx3bertStartTime
OctetString
 .1.3.6.1.4.1.351.110.6.2.12
dsx3bertStartDate
OctetString
 .1.3.6.1.4.1.351.110.6.2.13
dsx3bertBitCountUpper
Integer32
 .1.3.6.1.4.1.351.110.6.2.14
dsx3bertBitCountLower
Integer32
 .1.3.6.1.4.1.351.110.6.2.15
dsx3bertBitErrorCountUpper
Integer32
 .1.3.6.1.4.1.351.110.6.2.16
dsx3bertBitErrorCountLower
Integer32
 .1.3.6.1.4.1.351.110.6.2.17
dsx3bertErrorInsertionRate r/w
Enumeration
 .1.3.6.1.4.1.351.110.6.2.18
dsx3bertErrorInjectCount
Integer32
 .1.3.6.1.4.1.351.110.6.2.19
dsx3bertResourceStatus
Enumeration
 .1.3.6.1.4.1.351.110.6.2.2
dsx3bertCleanupAction
Enumeration
 .1.3.6.1.4.1.351.110.6.2.20
dsx3bertOwner
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.351.110.6.2.3
dsx3bertUserId r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.351.110.6.2.4
dsx3bertStatus
Enumeration
 .1.3.6.1.4.1.351.110.6.2.5
dsx3bertTestMedium r/w
Enumeration
 .1.3.6.1.4.1.351.110.6.2.6
dsx3bertPort r/w
Integer32
 .1.3.6.1.4.1.351.110.6.2.7
dsx3bertLine r/w
Integer32
 .1.3.6.1.4.1.351.110.6.2.8
dsx3bertMode r/w
Enumeration
 .1.3.6.1.4.1.351.110.6.2.9
ciscoMgx82xxDsx3BertMIB
.1.3.6.1.4.1.351.150.39
cmDsx3BertMIBConformance
.1.3.6.1.4.1.351.150.39.2
cmDsx3BertMIBGroups
.1.3.6.1.4.1.351.150.39.2.1
cmDsx3BertMIBCompliances
.1.3.6.1.4.1.351.150.39.2.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCOWAN-SMIcisco
  3. BASIS-MIBcisco
  4. SNMPv2-CONFrfc
  5. SNMPv2-TCrfc
  6. CISCO-MGX82XX-DSX3-BERT-MIBciscoselected
Conformance Groups (1)
cmDsx3BertConfGroup
dsx3bertControl dsx3bertResourceStatus dsx3bertOwner dsx3bertUserId dsx3bertStatus dsx3bertTestMedium dsx3bertPort dsx3bertLine dsx3bertMode dsx3bertPattern dsx3bertLoopback dsx3bertStartTime dsx3bertStartDate dsx3bertBitCountUpper dsx3bertBitCountLower dsx3bertBitErrorCountUpper dsx3bertBitErrorCountLower dsx3bertErrorInsertionRate dsx3bertErrorInjectCount dsx3bertCleanupAction
The collection of objects which are used for
configuring/running BERT on DSX3 interfaces.
 .1.3.6.1.4.1.351.150.39.2.1.1
Compliance Statements (1)

OID .1.3.6.1.4.1.351.150.39.2.2.1
The compliance statement for objects related
to Bert MIB.
Required groups
mandatory cmDsx3BertConfGroup