CISCO-MEGACO-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
181

cmedxGatewayConfigTable

table
.1.3.6.1.4.1.9.10.104.1.1.1 · 1 row entry · 36 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxGatewayConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxGatewayConfigTable' 
The Cisco media gateway configuration extended table defines
the parameters related to the configuration of the media
gateway in H.248 protocol.
          
Each entry represents an instance of an H.248 Gateway Link.
cmedxGatewayConfigEntry row .1.3.6.1.4.1.9.10.104.1.1.1.1
An entry containing additional H.248 protocol related
configuration applicable to a media gateway.
The following objects must be provided when the entry
is created, and they can not be modified after the entry
becomes …
Indexes
No indexes recorded
Column Syntax OID
cmedxGatewayMgcGroupIndex
This object specifies the MGC group parameters associated
with MGC group index. Those parameters are for the
communication between this media gateway and the MGCs
in the group.
The value of this object is the same as…
CISCO-MGC-MIBCMgcGroupIndexr/w
Type Constraints:
range: 1..12
 .1.3.6.1.4.1.9.10.104.1.1.1.1.1
cmedxGatewayIpAddressIndex
This object specifies the media gateway IP address.
It is the index of the entry in cMediaGwIpConfigTable
which defines the media gateway address over control
type PVC.
Unsigned32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.10.104.1.1.1.1.2
cmedxGatewayAssociationId
This object indicates the unique identification of the
H.248 association assigned by the H.248 Stack.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.3
cmedxGatewayMaxContexts
Maximum number of contexts is allowed in this media
gateway link.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.1.1.4
cmedxGatewayMaxTermsInContext
Maximum number of terminations per context in this media
gateway link.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.10.104.1.1.1.1.5
cmedxGatewayMgExecTime
This object specifies the interval within which the MGC
expects a response to any transaction from the MG (exclusive
of network delay specified by the object
cmedxGatewayInitialRtt).
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.6
cmedxGatewayMgcExecTime
This object specifies the interval within which the MG
should expects a response to any transaction from the MGC
(exclusive of network delay specified by the object
cmedxGatewayInitalRtt).
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.7
cmedxGatewayProvisionRespTimedeprecated
This object specifies the time within which to expect a
Pending Response if a transaction cannot be completed in
the media gateway and in the MGCs of the media gateway
link.

The value of this object shou…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.8
cmedxGatewayNumConnRetries
The number of times the media gateway retries to
connect to MGC before it sends out disconnect command.
timesUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.10.104.1.1.1.1.9
cmedxGatewayMaxWaitingDelay
When a media gateway is powered on, it should initiate
a restart timer to a random value, uniformly distributed
between 0 and the value specified in this object (the
maximum waiting delay, MWD). After restart timer tim…
millisecondsUnsigned32r/w
Constraints:
range: 0-600000
 .1.3.6.1.4.1.9.10.104.1.1.1.1.10
cmedxGatewayRestartDelay
This object specifies The time delay before the media
gateway accept any call from MGC after it sends
the command 'ServiceChange' with a 'Restart'.
millisecondsUnsigned32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.9.10.104.1.1.1.1.11
cmedxGatewayRespRetentionTime
This object specifies the time till which the responses
should be retained before they are sent if they receive
a repetition of a transaction that is still being
executed.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.12
cmedxGatewayInitialRtt
Initial round-trip time for the H.248 transaction to
be responded. It reflects the network delay time.
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.13
cmedxGatewayInactivityTime
This object specifies the the period of silence
between messages from MGC. If the period of silence
exceeds the value of this object, then a Notify command
with inactive MGC event is generated from the media gateway.
…
10 millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.14
cmedxGatewayHeaderAddrType
The address type in the H.248 message header.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.104.1.1.1.1.15
cmedxGatewayDownServiceDelay
This object specifies the grace period before the media
gateway link to be taken out of service.

The value of 0 means to take the media gateway link out
of service forcefully without any delay.
The value …
millisecondsInteger32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.16
cmedxGatewayActiveMgcAddress
The address of the currently active MGC in this media
gateway link.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.104.1.1.1.1.17
cmedxGatewayActiveMgcDomain
The domain name of the currently active MGC in this media
gateway link.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.10.104.1.1.1.1.18
cmedxGatewayActiveMgcPortNum
The transport layer port number of the currently active
MGC in this media gateway link.
CISCO-TCCiscoPort
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.19
cmedxGatewayStateChangeReason
This object indicates the reason for the operational state
change (cmedGatewayOperStatus) in the media gateway link.

mgcDirected (1) - The state change is directed from MGC.
mgDirected (2) - The state ch…
Enumeration
Enumerated Values:
1mgcDirected
2mgDirected
3mgcNotReachable
4numRetriesExpired
 .1.3.6.1.4.1.9.10.104.1.1.1.1.20
cmedxGatewayStateChangeMethod
This object indicates the method for the operational state
change (cmedGatewayOperStatus) in the media gateway link.

other (1) - None of the methods listed below.
graceful (2) - The state change to 'do…
Enumeration
Enumerated Values:
1other
2graceful
3forced
4handoff
5failover
6restart
7disconnect
8cancelGraceful
 .1.3.6.1.4.1.9.10.104.1.1.1.1.21
cmedxGatewayAdminAction
This object specifies the action that users used to
change the service state of the media gateway link.
This object can be modified while the entry is active.

up (1) - Bring the service state u…
Enumerationr/w
Enumerated Values:
1up
2downForceful
3downGraceful
4cancelGraceful
 .1.3.6.1.4.1.9.10.104.1.1.1.1.22
cmedxGatewayServiceState
This object indicates current operation status of the media
gateway link.

inService (1) - The media gateway link is in-service.
pendingIs (2) - The media gateway link is in the process
…
Enumeration
Enumerated Values:
1inService
2pendingIs
3outOfService
4pendingFoos
5pendingGoos
6mgcDirectOos
 .1.3.6.1.4.1.9.10.104.1.1.1.1.23
cmedxGatewayDynamicTpktVersion
This object specifies the TPKT header version that is
dynamically assigned based on the size of the packet
presented to TCP layer.
The TPKT header version is set to 3 when the size of packet
is represented by 2 octets …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.1.1.24
cmedxGatewayMaxCommandMsgSize
This object specifies the maximum message size on
this gateway link for a H248 transaction containing
the media gateway initiated commands.
For example, this object would limit the size of a
H248 transaction containing…
KbyteUnsigned32r/w
Constraints:
range: 1-4096
 .1.3.6.1.4.1.9.10.104.1.1.1.1.25
cmedxGatewayMaxReplyMsgSize
This object specifies the maximum message size on
this gateway link for a H248 transaction containing
the media gateway reply messages to MGC.
For example, this object would limit the size of a
H248 transaction contain…
KbyteUnsigned32r/w
Constraints:
range: 1-4096
 .1.3.6.1.4.1.9.10.104.1.1.1.1.26
cmedxGatewaySctpAssocId
This object specifies the SCTP association ID associated
with the H.248 association. This SCTP association ID
is the index (cSctpAssocId) of the entry in cSctpAssocTable.
If the SCTP ID value is 0, it indicates no SCTP…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.10.104.1.1.1.1.27
cmedxGatewaySrvChgProfile
This object specifies the profile name used in the profile
parameter of ServiceChange message to specify the attributes
and behaviors of the media gateway.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.10.104.1.1.1.1.28
cmedxGatewaySrvChgProfileVer
This object specifies the version of the profile indicated
in cmedxGatewaySrvChgProfile.
Unsigned32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.9.10.104.1.1.1.1.29
cmedxGatewayMsgTokenType
This object specifies the H248 message is in short formatted
PDU or long formatted PDU.
Enumerationr/w
Enumerated Values:
1shortFormat
2longFormat
 .1.3.6.1.4.1.9.10.104.1.1.1.1.30
cmedxGatewayMgProvisionRspTime
This object specifies the time within which to expect a
Pending Response if a transaction cannot be completed in
the media gateway and in the MGCs of the media gateway
link.

The value of this object shou…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.31
cmedxGatewayMgcProvisionRspTime
This object specifies the time within which to expect a
Pending Response from the MGC if a transaction cannot be
completed.

The value of this object should be greater than the value
of cmedxGatewayMgcExe…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.32
cmedxGatewayMgOrigPendLimit
This object specifies the number of TransactionPendings
that MG will send. Once this limit is exceeded, MG will
send a TransactionReply with Error 506.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.33
cmedxGatewayMgcOrigPendLimit
This object specifies the number of TransactionPendings
that MG expects to receive. Once this limit is exceeded,
MG will assume a TransactionReply with Error 506.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.104.1.1.1.1.34
cmedxGatewayDomainName
This object specifies the unique domain name to be
used for each gateway link. This object is relevant
only if cmedxGatewayHeaderAddrType is set to 'dns'.
The agent won't allow any attempt to set this value
for oth…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.10.104.1.1.1.1.35
cmedxGatewayCmbDnAndPortInMID
This object specifies whether the MID should be a
combination of the transport port number and the
domain name represented by cmedGatewayPort and
cmedxGatewayDomainName respectively, when
cmedxGatewayHeaderAddrTy…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.1.1.36

cmedxTerminationTypeTable

table
.1.3.6.1.4.1.9.10.104.1.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxTerminationTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxTerminationTypeTable' 
This table defines the attributes of a termination type
for a group of ephemeral terminations.
cmedxTerminationTypeEntry row .1.3.6.1.4.1.9.10.104.1.1.2.1
Each entry represents one termination type for a group
of ephemeral terminations in H.248.
When creating an entry, the object cmedxTermType have to be
provided.
Indexes
Column Syntax OID
cmedxTermTypeId
An unique identification number that is assigned to
the termination type by the manager
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.10.104.1.1.2.1.1
cmedxTermType
This object specifies the type of a group of ephemeral
terminations.
unknown (1) - none of the types listed below.
scn (2) - SCN/DS terminations
pdnRtp (3) - PDN terminations of RTP type.
…
Enumerationr/w
Enumerated Values:
1unknown
2scn
3pdnRtp
4pdnAtmAal1
5pdnAtmAal2
 .1.3.6.1.4.1.9.10.104.1.1.2.1.2
cmedxTermTypeProfileId
The property profile identifier with which the terminations
within this termination type will be associated.
CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndexOrZeror/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.10.104.1.1.2.1.3
cmedxTermTypePkgIds
The H.248 packages applied to this termination type.
CH248Packagesr/w
Type Values:
0pkgG
1pkgRoot
2pkgToneGen
3pkgToneDet
4pkgDG
5pkgDD
6pkgCG
7pkgCD
8pkgCT
9pkgNT
10pkgRTP
11pkgTDMC
12pkgAN
13pkgBCG
14pkgXCG
15pkgSrvTn
16pkgXsrvTn
17pkgChp
18pkgIT
19pkgLLTR
20pkgBCAS
21pkgRBS
22pkgOSES
23pkgAMET
24pkgBCASAddr
25pkgCASBlock
26pkgGRI
27rtcpxr
28xrbm
29qac
30pkgDS
31pkgETerm
32pkgXnq
33pkgCTYP
34pkgIPFAX
 .1.3.6.1.4.1.9.10.104.1.1.2.1.4
cmedxTermTypeRowStatus
This object is used to create new rows, modify existing rows
and to delete existing rows.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.104.1.1.2.1.5

cmedxProfileTable

table
.1.3.6.1.4.1.9.10.104.1.1.3 · 1 row entry · 27 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxProfileTable' 
This table contains a list of the configurable
properties in the H.248 profile supported in 
a media gateway.  
A property profile can be applied to a termination,
a group of termination, or a termination type.
cmedxProfileEntry row .1.3.6.1.4.1.9.10.104.1.1.3.1
Each entry represents all possible configurable
properties supported by Cisco media gateway
in an H.248 profile.
Indexes
Column Syntax OID
cmedxProfileIndex
This object uniquely identifies the H.248 profile.
CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.9.10.104.1.1.3.1.1
cmedxProfilePlayCpToneInterDur
This object specifies the duration for playing
a list of call progressing tones between two call
progressing signals.
The value of 0 indicates there is no wait between
two call progressing signals.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.2
cmedxProfileDtmfDigitOnDur
This object specifies the duration of the active DTMF
digit during DTMF playout from the gateway.
A complete DTMF digit is characterized by DTMF on
with duration specified by this object followed by a
pause (signal o…
millisecondsUnsigned32r/w
Constraints:
range: 40-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.3
cmedxProfileDtmfPauseDur
This object specifies the duration of the pause after an
active DTMF digit during DTMF playout from the gateway.
For playout of multiple DTMF digits, the sum of the
digit-on and pause (signaling velocity) should not b…
millisecondsUnsigned32r/w
Constraints:
range: 40-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.4
cmedxProfileCot1Frequency
This object specifies the tone frequency to be
transmit between gateways in the continuity test.
HzUnsigned32r/w
Constraints:
range: 1-4000
 .1.3.6.1.4.1.9.10.104.1.1.3.1.5
cmedxProfileCot2Frequency
This object specifies the tone frequency to be
received between gateways in the continuity test.
HzUnsigned32r/w
Constraints:
range: 1-4000
 .1.3.6.1.4.1.9.10.104.1.1.3.1.6
cmedxProfileInitiateCotDur
This object specifies the duration for the continuity
test tone to be played when the gateway initiates a COT.
The value of 0 indicates that the tone will be played
infinitely unless interrupted.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.7
cmedxProfileRespCotMethod
This object specifies the method for responding to COT
(Continuity Test Tone) when the gateway detects a
the continuity test signal.
loopback (1) - The gateway loops back the received
conti…
Enumerationr/w
Enumerated Values:
1loopback
2transponder
 .1.3.6.1.4.1.9.10.104.1.1.3.1.8
cmedxProfileDetectLongCpToneDur
This object specifies the duration for detecting a
long call progressing tone.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.9
cmedxProfileDetectLongDigitDur
This object specifies the duration for detecting a
long digit tone signal.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.10
cmedxProfileEchoCancelEnabled
This object specifies whether or not the Echo
Cancellation is enabled or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.3.1.11
cmedxProfileEchoCancelTail
This object specifies the Echo Canceler coverage.
This object is valid if the cmedxProfileEchoCancelEnabled
object is 'true'.
echoCanceller8ms - 8 ms echo canceler coverage.
echoCanceller16ms - 16 ms echo canceler cov…
Enumerationr/w
Enumerated Values:
1echoCanceller8ms
2echoCanceller16ms
3echoCanceller24ms
4echoCanceller32ms
5echoCanceller64ms
6echoCanceller128ms
 .1.3.6.1.4.1.9.10.104.1.1.3.1.12
cmedxProfileInGainControl
This object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings
only define a gain/loss relative to the 0 dB setting.
The absolute loss at the 0 dB setting could be
implem…
dBInteger32r/w
Constraints:
range: -6-14
 .1.3.6.1.4.1.9.10.104.1.1.3.1.13
cmedxProfileOutAttnControl
This object contains the amount of attenuation inserted
at the transmit side of the interface.
The output attenuation settings only define a loss
relative to the 0 dB setting.
The absolute loss at the 0 dB setting could…
dBUnsigned32r/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.9.10.104.1.1.3.1.14
cmedxProfileVoIpVadEnabled
This object specifies VAD (Voice Activity Detection)
is enabled for the compression DSPs of this interface
when the application is VoIP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.3.1.15
cmedxProfileVoIpVadTimer
This object specifies the hangover time for VAD in the
VoIP application.
Once the voice inactivity is detected, the media gateway
waits for the duration of this value before activating
silence suppression.
This object…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.16
cmedxProfileVoAal2VadTimer
This object specifies the hangover time for VAD in the
VoATM over AAL2 application.
Once the voice inactivity is detected, the media gateway
waits for the duration of this value before activating
silence suppression.
…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.104.1.1.3.1.17
cmedxProfileAtmBearerType
This object specifies ATM bearer type.
bearerSvc (1) - the ATM bearer type is SVC (Switched
Virtual Circuit).
bearerPvc (1) - the ATM bearer type is PVC (Permanent
Virtual Circuit).
Enumerationr/w
Enumerated Values:
1bearerSvc
2bearerPvc
 .1.3.6.1.4.1.9.10.104.1.1.3.1.18
cmedxProfileAtmAalPartialFill
This object specifies the fill level of cells in case of
AAL adaptation .
The value of this object will be used if the MGC does
not specify partial fill in the commands.
ATM cell size is 53 bytes, 5 bytes for header, 48…
Unsigned32r/w
Constraints:
range: 1-48
 .1.3.6.1.4.1.9.10.104.1.1.3.1.19
cmedxProfileAtmAalType
This object specifies the adaptation layer of ATM.
other (1) - None of the types listed below.
aal1 (2) - ATM AAL1 adaptation layer
aal1Sdt (3) - ATM AAL1 with SDT (Structured Data
Transfer)
aal1Udt …
Enumerationr/w
Enumerated Values:
1other
2aal1
3aal1Sdt
4aal1Udt
5aal2
 .1.3.6.1.4.1.9.10.104.1.1.3.1.20
cmedxProfileSuppressBearerDigit
This object controls if the digits should be suppressed
from voice media stream. When MGC has requested digits,
if this object is set to 'true', the digits will be
reported to MGC only, the digits will not be sent as
r…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.3.1.21
cmedxProfileRowStatus
When an entry is created, at least one of the objects
in the entry has to be provided and the default value
will be assigned to the rest of the objects.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.104.1.1.3.1.22
cmedxProfileOriginatingCotTx
This object specifies the COT tone to be transmitted
from originating gateway in the continuity test.
CMedxCotTonesr/w
Type Values:
1co1
2co2
 .1.3.6.1.4.1.9.10.104.1.1.3.1.23
cmedxProfileOriginatingCotRx
This object specifies the COT tone to be received
in originating gateway in the continuity test.
CMedxCotTonesr/w
Type Values:
1co1
2co2
 .1.3.6.1.4.1.9.10.104.1.1.3.1.24
cmedxProfileTerminatingCotTx
This object specifies the COT tone to be transmitted
from terminating gateway in the continuity test.
CMedxCotTonesr/w
Type Values:
1co1
2co2
 .1.3.6.1.4.1.9.10.104.1.1.3.1.25
cmedxProfileTerminatingCotRx
This object specifies the COT tone to be received
in terminating gateway in the continuity test.
CMedxCotTonesr/w
Type Values:
1co1
2co2
 .1.3.6.1.4.1.9.10.104.1.1.3.1.26
cmedxProfileComfortNoiseGenerate
This object specifies the type of comfort noise generation:

(1) none: No comfort noise generation applied
(2) simple: Cisco Proprietary comfort noise generation
(3) g711A2: ITU G.711 Appendix II compliant
Enumerationr/w
Enumerated Values:
1none
2simple
3g711A2
 .1.3.6.1.4.1.9.10.104.1.1.3.1.27

cmedxCallReduceControlTable

table
.1.3.6.1.4.1.9.10.104.1.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxCallReduceControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxCallReduceControlTable' 
The MIB objects in this table are used to control
the rate at which call attempts are made by Media 
gateway controller on this Media Gateway.
cmedxCallReduceControlEntry row .1.3.6.1.4.1.9.10.104.1.1.4.1
An entry in this table contains the control parameters that
indicate the frequency and number of notifications sent to
MGC in the event congestion is detected on MG.
Indexes
Column Syntax OID
cmedxCallCongEnabled
This object controls if the H.248 congestion package
(H.248.10) and its associated features should be enabled
for the media gateway.

If this object is set to 'false', then the following MIB
objects and MI…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.4.1.1
cmedxCallRenotifInterval
This object specifies the interval of the congestion
renotification from the media gateway to the MGC.

In the event of congestion on the Media Gateway, gateway
generates an event towards MGC. Using this …
secondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.10.104.1.1.4.1.2
cmedxCRRNumOfLevel
This objects specifies the number of level corresponding to
which a different call reduction rate notification is
generated towards MGC.

Each level has a different call reduction rate, the CRR
informat…
Unsigned32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.10.104.1.1.4.1.3
cmedxCurrentCRR
This object indicates the current percentage reduction in
the rate of calls that MGC is attempting towards MG.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.10.104.1.1.4.1.4
cmedxCrrNotifyState
This object indicates the current gateway congestion
notification state.
The value of 'true' means the gateway will notify
MGC when the gateway is congested.
The value of 'false' means the gateway won't notify
MGC when …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.4.1.5
cmedxCrrNotifyEnabled
This object indicates the bit map of the H248 association
index (cmedGatewayLinkId) in which the gateway congestion
notification is enabled.
The MSB (most significant bit) is the association index 1.
A 1-bit indicates …
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.9.10.104.1.1.4.1.6
cmedxCurrentCallState
This object indicates the state of the gateway in
accepting the incoming new call.

acceptCall - the incoming new call will be processed.
dropCall - the incoming new call will be droped due
…
Enumeration
Enumerated Values:
1acceptCall
2dropCall
 .1.3.6.1.4.1.9.10.104.1.1.4.1.7

cmedxCallReduceLevelTable

table
.1.3.6.1.4.1.9.10.104.1.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxCallReduceLevelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxCallReduceLevelTable' 
The table presents mapping between a level and corresponding
call reduction rate.
cmedxCallReduceLevelEntry row .1.3.6.1.4.1.9.10.104.1.1.5.1
The number of entry on this table is determined by the MIB
object 'cmedxCRRNumOfLevel'.
Indexes
Column Syntax OID
cmedxCallReduceLevelNum
The index starts from 1, and the maximum index equals to
'cmedxCRRNumOfLevel'.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.10.104.1.1.5.1.1
cmedxCallReduceRate
This object indicates call reduction rate (CRR) for a given
call reduce rate level.

The default value of this object is based on the formula:
level 1: 100
other level: 100 - ((80/(nol - 1)) * (lev…
percentUnsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.10.104.1.1.5.1.2

cmedxCodecNegotiationTable

table
.1.3.6.1.4.1.9.10.104.1.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxCodecNegotiationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxCodecNegotiationTable' 
This table contains configuration information for different
type of CODEC negotiation of calls which include voice call 
over adaptation layer AAL1 and AAL5.
If the value lclLcoRcd(5), lclRcdLco(6) of 
cvapCodecNegotiationOption is used as CODEC negotiation 
option, the CODEC list configuration information in this   
table will be used for CODEC negotiation.
cmedxCodecNegotiationEntry row .1.3.6.1.4.1.9.10.104.1.1.6.1
An entry represents a CODEC rate supported for VoIP or
VoATM with AAL1 or AAL5 application in the media gateway.
A list of entries for all CODEC types supported in the media
gateway are created by the agent when a cmed…
Indexes
Column Syntax OID
cmedxCodecNegotiationCodec
This object specifies the CODEC to be used in this
profile.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate
Type Values:
1g729r8000
2g729Ar8000
3g726r16000
4g726r24000
5g726r32000
6g711ulawr64000
7g711Alawr64000
8g728r16000
9g723r6300
10g723r5300
11gsmr13200
12g729Br8000
13g729ABr8000
14g723Ar6300
15g723Ar5300
16g729IETFr8000
17gsmeEr12200
18clearChannel
19g726r40000
20llcc
21gsmAmrNb
22iLBC
23iLBCr15200
24iLBCr13330
25g722r4800
26g722r5600
27g722r6400
28iSAC
29aaclc
30aacld
 .1.3.6.1.4.1.9.10.104.1.1.6.1.1
cmedxCodecNegotiationPreference
This object specified the preference configured by the
user for each CODEC. Lower the number, higher the
preference of the CODEC.

If this object is set to 0, the corresponding CODEC will
not be used in …
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.10.104.1.1.6.1.2

cmedxOverloadControlTable

table
.1.3.6.1.4.1.9.10.104.1.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxOverloadControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxOverloadControlTable' 
This table is used to configure the media gateway
overload control parameters specified in H.248.11 package.
cmedxOverloadControlEntry row .1.3.6.1.4.1.9.10.104.1.1.7.1
An entry in this table contains the overload control
parameters of the media gateway.
Indexes
Column Syntax OID
cmedxOverloadControlEnabled
This object controls if the H.248 overload package
(H.248.11) and its associated features should be enabled
for the media gateway.

If this object is set to 'false', then the following MIB
objects and MIB …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.7.1.1
cmedxOverloadNotifyState
This object indicates the current gateway overload
notification state.
The value of 'true' means the gateway will notify
MGC when the gateway is overloaded.
The value of 'false' means the gateway won't notify
MGC when t…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.1.7.1.2
cmedxOverloadNotifyEnabled
This object indicates the bit map of the H248 association
index (cmedGatewayLinkId) in which the gateway overload
notification is enabled.
The MSB (most significant bit) is the association index 1.
A 1-bit indicates th…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.9.10.104.1.1.7.1.3

cmedxGatewayStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxGatewayStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxGatewayStatsTable' 
This table is extended from cmedGatewayStatsTable which
contains additional control protocol related statistics of
the media gateway link.
cmedxGatewayStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.1.1
Entry holding statistics about a group of
media Gateway/signaling link pair
Indexes
No indexes recorded
Column Syntax OID
cmedxGatewayLastEvent
The event code of the last event occurred on the link.
Unsigned32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.10.104.1.2.1.1.1

cmedxCommandStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.2 · 1 row entry · 31 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxCommandStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxCommandStatsTable' 
This table provides the H.248 Command related statistics
for the media gateway link.
          
The H.248 protocol provides commands for manipulating the
logical entities of the protocol connection model, 
Contexts and Terminations.
For example, Commands exist to add Terminations to a Context, 
modify Terminations, subtract Terminations from a Context,
and audit properties of Contexts or Terminations.
          
Most commands are for the specific use of the Media Gateway
Controller (MGC) as command initiator in controlling Media 
Gateways (MG) as command responders.  The exceptions are the 
Notify and ServiceChange commands: 
Notify is sent from Media Gateway to Media Gateway Controller, 
and ServiceChange may be sent by either entity.
cmedxCommandStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.2.1
The system creates one entry for each media gateway link
when it is created.
Indexes
Column Syntax OID
cmedxCmdNumAddFails
Total number of cumulative ADD commands failed in
the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.1
cmedxCmdNumAddSucceeds
Total number of cumulative ADD command succeeded
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.2
cmedxCmdNumSubtractFails
Total number of cumulative SUBTRACT commands failed
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.3
cmedxCmdNumSubtractSucceeds
Total number of cumulative SUBTRACT commands succeeded
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.4
cmedxCmdNumMoveFails
Total number of cumulative MOVE commands failed in
the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.5
cmedxCmdNumMoveSucceeds
Total number of cumulative MOVE commands succeeded
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.6
cmedxCmdNumModifyFails
Total number of cumulative MODIFY commands failed
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.7
cmedxCmdNumModifySucceeds
Total number of cumulative MODIFY commands succeeded
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.8
cmedxCmdNumAuditValFails
Total number of cumulative AUDIT VALUE commands failed
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.9
cmedxCmdNumAuditValSucceeds
Total number of cumulative AUDIT VALUE commands succeeded
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.10
cmedxCmdNumAuditCapFails
Total number of cumulative AUDIT CAPABILITY commands
failed in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.11
cmedxCmdNumAuditCapSucceeds
Total number of cumulative AUDIT CAPABILITY commands
succeeded in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.12
cmedxCmdNumNotifyFails
Total number of cumulative NOTIFY commands failed to
respond from MGC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.13
cmedxCmdNumNotifySucceeds
Total number of cumulative NOTIFY commands successfully
responded from the MGC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.14
cmedxCmdNumSrvChgFromMgcFails
Total number of cumulative ServiceChange commands from
MGC to MG failed in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.15
cmedxCmdNumSrvChgFromMgcSucceeds
Total number of cumulative ServiceChange commands from
MGC to MG succeeded in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.16
cmedxCmdNumSrvChgFromMgFails
Total number of cumulative ServiceChange commands from
MG to MGC failed in MGC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.17
cmedxCmdNumSrvChgFromMgSucceeds
Total number of cumulative ServiceChange commands from MG
to MGC succeeded in MGC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.18
cmedxCmdTotalFails
Total number of commands failed in the media gateway
link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.19
cmedxCmdTotalSucceeds
Total number of commands succeeded in the media gateway
link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.20
cmedxCmdTotal
Total number of failed and successful commands in the
media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.21
cmedxCmdNumAddPendings
Total number of cumulative ADD commands
remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.22
cmedxCmdNumSubtractPendings
Total number of cumulative SUBTRACT commands
remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.23
cmedxCmdNumMovePendings
Total number of cumulative MOVE commands
remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.24
cmedxCmdNumModifyPendings
Total number of cumulative MODIFY commands
remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.25
cmedxCmdNumAuditValPendings
Total number of cumulative AUDIT VALUE commands
remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.26
cmedxCmdNumAuditCapPendings
Total number of cumulative AUDIT CAPABILITY commands
remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.27
cmedxCmdNumNotifyPendings
Total number of cumulative NOTIFY commands
remain pending in response from MGC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.28
cmedxCmdNumSrvChgFromMgcPendings
Total number of cumulative ServiceChange commands from
MGC to MG remain pending in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.29
cmedxCmdNumSrvChgFromMgPendings
Total number of cumulative ServiceChange commands from
MG to MGC remain pending in MGC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.30
cmedxCmdTotalPendings
Total number of commands remain pending
in the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.2.1.31

cmedxContextStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxContextStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxContextStatsTable' 
This table provides the H.248 Context related statistics
for the media gateway link.
cmedxContextStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.3.1
The system creates one entry for each media gateway link
when it is created.
Indexes
Column Syntax OID
cmedxCntxNumActiveContexts
The current number of active contexts in the media
gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.1
cmedxCntxPeakNumActiveContexts
Peak number of active contexts in the media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.2
cmedxCntxNumContextAllocated
Total number of contexts has been allocated in
the media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.3
cmedxCntxNumContextFreed
Total number of contexts has been freed in the
media gateway link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.4
cmedxCntxShortestContextLife
The shortest life span for the contexts in the
media gateway link.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.5
cmedxCntxAverageContextLife
The average life span for the contexts in the media
gateway link.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.6
cmedxCntxLongestContextLife
The longest life span for the contexts in the media
gateway link.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.7
cmedxCntxNumCntxMoreThan2Terms
The number of contexts having more than 2 terminations
in the media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.3.1.8

cmedxPhysicalTermStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxPhysicalTermStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxPhysicalTermStatsTable' 
This table contains statistics related to physical
terminations in a media gateway.
cmedxPhysicalTermStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.4.1
Each entry contains the statistics for a physical
termination in the media gateway.
Indexes
No indexes recorded
Column Syntax OID
cmedxPhyTermStatsNumAdds
Number of total ADD commands on this physical
termination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.4.1.1
cmedxPhyTermStatsNumFailures
Number of total command failures on this
physical termination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.4.1.2
cmedxPhyTermStatsOosFromMgcs
Number of total out of service initiated from MGC on
this physical termination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.4.1.3
cmedxPhyTermStatsOosFromOams
Number of total out of service initiated from OAM
(Operation Administration Management, either MG or NMS)
on this physical termination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.4.1.4

cmedxEphemeralTermStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.5 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxEphemeralTermStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxEphemeralTermStatsTable' 
This table contains statistics related to ephemeral
terminations.
cmedxEphemeralTermStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.5.1
Each entry contains the statistics of all ephemeral
terminations for the termination type.
Indexes
Column Syntax OID
cmedxEphTermStatsType
This object specifies the statistics of the termination type
to be retrieved.
all (1) - Statistics for all ephemeral termination
types.
scn (2) - Statistics for SCN/DS terminat…
Enumeration
Enumerated Values:
1all
2scn
3pdnRtp
4pdnAtmAal1
5pdnAtmAal2
 .1.3.6.1.4.1.9.10.104.1.2.5.1.1
cmedxEphTermStatsNumAdds
Number of total ADD commands has been initiated
on this termination type.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.5.1.2
cmedxEphTermStatsNumFailures
Number of total command failures on this
termination type.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.5.1.3

cmedxCommandProcStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.6 · 1 row entry · 27 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxCommandProcStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxCommandProcStatsTable' 
This table provides the statistics related to H.248
command processing on a media gateway link.
cmedxCommandProcStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.6.1
The information in each entry is for a media gateway link.
Indexes
Column Syntax OID
cmedxCmdPhyTermAddRespTimeMin
The minimum add response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.1
cmedxCmdPhyTermAddRespTimeMax
The maximum add response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.2
cmedxCmdPhyTermAddRespTimeAvg
The average add response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.3
cmedxCmdPhyTermAddRespTimeCount
The number of add responses for physical terminations
which have been sent during the statistics interval
on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.4
cmedxCmdPhyTermModRespTimeMin
The minimum modify response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.5
cmedxCmdPhyTermModRespTimeMax
The maximum modify response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.6
cmedxCmdPhyTermModRespTimeAvg
The average modify response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.7
cmedxCmdPhyTermModRespTimeCount
The number of modify responses for physical terminations
which have been sent during the statistics interval
on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.8
cmedxCmdPhyTermSubRespTimeMin
The minimum subtract response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.9
cmedxCmdPhyTermSubRespTimeMax
The maximum subtract response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.10
cmedxCmdPhyTermSubRespTimeAvg
The average subtract response time (ms) for physical
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.11
cmedxCmdPhyTermSubRespTimeCount
The number of subtract responses for physical terminations
which have been sent during the statistics interval
on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.12
cmedxCmdEphTermAddRespTimeMin
The minimum add response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.13
cmedxCmdEphTermAddRespTimeMax
The maximum add response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.14
cmedxCmdEphTermAddRespTimeAvg
The average add response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.15
cmedxCmdEphTermAddRespTimeCount
The number of add responses for ephemeral terminations
which have been sent during the statistics interval
on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.16
cmedxCmdEphTermModRespTimeMin
The minimum modify response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.17
cmedxCmdEphTermModRespTimeMax
The maximum modify response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.18
cmedxCmdEphTermModRespTimeAvg
The average modify response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.19
cmedxCmdEphTermModRespTimeCount
The number of modify responses for ephemeral terminations
which have been sent during the statistics interval
on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.20
cmedxCmdEphTermSubRespTimeMin
The minimum subtract response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.21
cmedxCmdEphTermSubRespTimeMax
The maximum subtract response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.22
cmedxCmdEphTermSubRespTimeAvg
The average subtract response time (ms) for ephemeral
terminations on a media gateway link.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.23
cmedxCmdEphTermSubRespTimeCount
The number of subtract responses for ephemeral terminations
which have been sent during the statistics interval
on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.24
cmedxCmdNumInProgCmds
The number of in-progress commands on a media gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.25
cmedxCmdMaxInProgCmds
The maximum number of in-progress commands on a media
gateway link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.26
cmedxCmdSinceLastReset
The elapsed time (in seconds) from the last periodic reset.

All (non-accumulator) statistic objects were zeroed on
the last reset.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.6.1.27

cmedxOverloadStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.7 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxOverloadStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxOverloadStatsTable' 
This table contains statistics related to gateway overload
control (H.248.11).
cmedxOverloadStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.7.1
Each entry contains the statistics of gateway overload
control.
Indexes
Column Syntax OID
cmedxOverloadEnterCounts
The number of times that the gateway enters the
overload condition because of any of CAC monitoring
resources has exceeded the medium threshold
specified by the value of ccacSysRpMedThreshold
since the last counter res…
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.7.1.1
cmedxOverloadExitCounts
The number of times that the gateway exits the
overload condition when all of CAC monitoring
resources have fallen below the low threshold
specified by the value of ccacSysRpLowThreshold
since the last counter reset.
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.7.1.2
cmedxOverloadCurrentState
This object indicates the current overload state
of the gateway.
normal - In normal condition.
overload - In overload condition.
Enumeration
Enumerated Values:
1normal
2overload
 .1.3.6.1.4.1.9.10.104.1.2.7.1.3
cmedxOverloadLastResetTime
This object contains the value of sysUpTime when
the last counter reset occurred by setting
cmedxOverloadCountersClear to 'true'.

If no counter reset has occurred since the last time
the media gateway reb…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.104.1.2.7.1.4
cmedxOverloadCountersClear
When this object is to set value of true(1), all
statistics counters in the table cmedxOverloadStatsTable
will be reset to zero.

Setting this object to a value of false(2) has no
implication.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.2.7.1.5

cmedxOverloadResourceStatsTable

table
.1.3.6.1.4.1.9.10.104.1.2.8 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxOverloadResourceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxOverloadResourceStatsTable' 
This table contains the statistics of the resource
utilization when the gateway enters overload condition.
cmedxOverloadResourceStatsEntry row .1.3.6.1.4.1.9.10.104.1.2.8.1
Each entry contains the utilization statistics of
the resource when the gateway is overloaded.
Indexes
Column Syntax OID
cmedxOverloadRsResourceIndex
This object uniquely identifies the utilization
of the resource is monitored for the gateway overload.

The value of 0 is to sum the individual statistical
counter for all the monitored resources.
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.10.104.1.2.8.1.1
cmedxOverloadRsHighCounts
The accumulated number of times that the utilization
of the resource is above the high threshold specified
by ccacSysRpHighThreshold when the gateway enters
the overload condition since the last counter reset.
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.8.1.2
cmedxOverloadRsMedCounts
The accumulated number of times that the utilization
of the resource is above the medium threshold specified
by ccacSysRpMedThreshold when the gateway enters the
overload condition since the last counter reset.
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.8.1.3
cmedxOverloadRsLowCounts
The accumulated number of times that the utilization
of the resource is above the low threshold specified
by ccacSysRpLowThreshold when the gateway enters
the overload condition since the last counter reset.
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.8.1.4
cmedxOverloadContributorCounts
The accumulated number of times the CAC monitoring
resource causes the gateway entering the overload
condition since the last counter reset.
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.8.1.5
cmedxOverloadRsLastResetTime
This object contains the value of sysUpTime when
the last counter reset occurred by setting
cmedxOverloadRsCountersClear to 'true'.

If no counter reset has occurred since the last time
the media gateway r…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.104.1.2.8.1.6
cmedxOverloadRsCountersClear
When this object is to set value of true(1), all
statistics counters in the table
cmedxOverloadResourceStatsTable will be reset to zero.

Setting this object to a value of false(2) has no
implication.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.2.8.1.7

cmedxEphemeralTermStatsInfoTable

table
.1.3.6.1.4.1.9.10.104.1.2.9 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmedxEphemeralTermStatsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEGACO-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEGACO-EXT-MIB::cmedxEphemeralTermStatsInfoTable' 
This table contains statistics information related to
ephemeral terminations.
cmedxEphemeralTermStatsInfoEntry row .1.3.6.1.4.1.9.10.104.1.2.9.1
Each entry contains the ephemeral termination statistics
inforamtion for a specific level.
Indexes
Column Syntax OID
cmedxEphTermInfoStatsIndex
This object uniquely identifies the entry to store ephemeral
termination statistics information.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.104.1.2.9.1.1
cmedxEphTermInfoStatsIndexType
This object is used to indicate index
('cmedxEphTermInfoStatsIndex') type.
Enumeration
Enumerated Values:
1bpvc
2gw
3vgw
 .1.3.6.1.4.1.9.10.104.1.2.9.1.2
cmedxEphTermInfoNumTerm
The accumulated number of ephemeral
termination.
CISCO-ATM-TRUNK-MIBCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.104.1.2.9.1.3
cmedxEphTermInfoNumInUsed
The number of ephemeral termination currently
in use.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.4
cmedxEphTermInfoMaxNumInUsed
The high watermark of number of ephemeral termination
in use.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.5
cmedxEphTermInfoMinDuration
The minimum duration of ephemeral termination.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.6
cmedxEphTermInfoMaxDuration
The maximum duration of ephemeral termination.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.7
cmedxEphTermInfoAvgDuration
The average duration of ephemeral termination.
msSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.8
cmedxEphTermInfoCounterClear
When this object is set to value of true(1), all statistics
counters with type of Counter32SinceReset in this table
will be reset to zero.

Setting this object to a value of false(2) has no implication.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.104.1.2.9.1.9
cmedxEphTermInfoSinceLastClear
The elapsed time from the last counter clear.

The following objects are set to zero on the
last counter clear:

'cmedxEphTermInfoNumTerm'
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.10
cmedxEphTermInfoSinceLastReset
The elapsed time from the last reset.

The following objects are set to zero on the
last reset:

'cmedxEphTermInfoNumInUsed'
'cmedxEphTermInfoMaxNumInUsed'
'cmedxEphTermInfoMinDur…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.11
cmedxEphTermIndexInfo
This object is used to store the index
('cmedxEphTermInfoStatsIndex') related information.
Example: for bpvc ('cmedxEphTermInfoStatsIndexType'),
the vpi and vci are stored in this object.
The value zero means this obj…
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.104.1.2.9.1.12
cmedxEphTermInfoNumFreed
Total number of ephemeral terminations that have been
freed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.104.1.2.9.1.13