CISCO-MEDIATRACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
132

cMTFlowSpecifierTable

table
.1.3.6.1.4.1.9.9.800.1.1.18 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTFlowSpecifierTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTFlowSpecifierTable' 
This table lists the flow specifiers contained by the device.
cMTFlowSpecifierEntry row .1.3.6.1.4.1.9.9.800.1.1.18.1
An entry represents a flow specifier which can be
associated with a Mediatrace session contained by the
cMTSessionTable.

Each entry is uniquely identified by name specified
by cMTFlowSpecifierName object.…
Indexes
Column Syntax OID
cMTFlowSpecifierName
A unique identifier for the flow specifier.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.18.1.1
cMTFlowSpecifierRowStatus
This object specifies the status of the flow specifier.
Only CreateAndGo and active status is supported. The
following columns must be valid before activating the
flow specifier:

- cMTFlowSpecifierDes…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.18.1.2
cMTFlowSpecifierMetadataGlobalId
This object specifies the meta-data Global ID of the
flow specifier. Maximum of 24 characters can be
specified for this field.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.18.1.3
cMTFlowSpecifierDestAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTFlowSpecifierDestAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.1.18.1.4
cMTFlowSpecifierDestAddr
Address of the destination of the flow to be monitored.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.18.1.5
cMTFlowSpecifierDestPort
This object specifies the destination port for the flow.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.800.1.1.18.1.6
cMTFlowSpecifierSourceAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTFlowSpecifierSourceAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.1.18.1.7
cMTFlowSpecifierSourceAddr
This object specifies the source address for the
flow to be monitored.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.18.1.8
cMTFlowSpecifierSourcePort
This object specifies the source port for the flow.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.800.1.1.18.1.9
cMTFlowSpecifierIpProtocol
This is transport protocol type for the flow. Flow of this
type between specified source and and destination will be
monitored.
CiscoMediatraceSupportProtocolr/w
Type Values:
6tcp
17udp
 .1.3.6.1.4.1.9.9.800.1.1.18.1.10

cMTPathSpecifierTable

table
.1.3.6.1.4.1.9.9.800.1.1.19 · 1 row entry · 14 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTPathSpecifierTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTPathSpecifierTable' 
This table lists the path specifiers contained by the device.
cMTPathSpecifierEntry row .1.3.6.1.4.1.9.9.800.1.1.19.1
This entry defines path specifier that can be used in
mediatrace session.

Each entry is uniquely identified by name specified
by cMTPathSpecifierName object. A row created in this
table will be shown i…
Indexes
Column Syntax OID
cMTPathSpecifierName
A unique identifier for the path specifier.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.19.1.1
cMTPathSpecifierRowStatus
This object specifies the status of the path specifier.
Only CreateAndGo and active status is supported. The
following columns must be valid before activating the
path specifier:

- cMTPathSpecifierDes…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.19.1.2
cMTPathSpecifierMetadataGlobalId
Metadata global session id can be used as path specifier.
This object should be populated when this is desired.
Mediatrace software will query the Metadata database for
five tuple to be used for establishing the path.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.19.1.3
cMTPathSpecifierDestAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTPathSpecifierDestAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.1.19.1.4
cMTPathSpecifierDestAddr
This object specifies the destination address for
the path specifier.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.19.1.5
cMTPathSpecifierDestPort
This object specifies the destination port for the
path specifier.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.800.1.1.19.1.6
cMTPathSpecifierSourceAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTFlowSpecifierSourceAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.1.19.1.7
cMTPathSpecifierSourceAddr
This object specifies the source address for the
path specifier.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.19.1.8
cMTPathSpecifierSourcePort
This object specifies the source port for the path
specifier.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.800.1.1.19.1.9
cMTPathSpecifierProtocolForDiscovery
This object specifies the protocol used for path discovery
on Mediatrace. Currently, only RSVP is used by default.
CiscoMediatraceDiscoveryProtocolr/w
Type Values:
46rsvp
 .1.3.6.1.4.1.9.9.800.1.1.19.1.10
cMTPathSpecifierGatewayAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTPathSpecifierGatewayAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.1.19.1.11
cMTPathSpecifierGatewayAddr
When the mediatrace session is originated on layer-2 switch
the address of gateway is required to establish the session.
This object specifies address of this gateway.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.19.1.12
cMTPathSpecifierGatewayVlanId
This object specifies the Vlan ID associated with the gateway
for path specifier.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.9.9.800.1.1.19.1.13
cMTPathSpecifierIpProtocol
This object specifies which metrics are monitored for a
path specifier. Currently, only TCP and UDP are
supported.
CiscoMediatraceSupportProtocolr/w
Type Values:
6tcp
17udp
 .1.3.6.1.4.1.9.9.800.1.1.19.1.14

cMTSessionParamsTable

table
.1.3.6.1.4.1.9.9.800.1.1.20 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTSessionParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTSessionParamsTable' 
This table is collection of session parameter profiles.
cMTSessionParamsEntry row .1.3.6.1.4.1.9.9.800.1.1.20.1
An entry represents session parameters that can be associated
with a Mediatrace session contained by the cMTSessionTable.

Each entry is uniquely identified by name specified
by cMTSessionParamsName object.…
Indexes
Column Syntax OID
cMTSessionParamsName
This object specifies the name of this set of session
parameters.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.20.1.1
cMTSessionParamsRowStatus
This object specifies the status of the session parameters.
Only CreateAndGo and active status is supported.

In order for this object to become active cMTSessionParamsName
must be defined. The value of…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.20.1.2
cMTSessionParamsResponseTimeout
This object specifies the amount of time a session
should wait for the responses after sending out a
Mediatrace request. The initiator will discard any
responses to a particular request after this timeout.
secondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.800.1.1.20.1.3
cMTSessionParamsFrequency
Duration between two successive data fetch requests.
secondsUnsigned32r/w
Constraints:
range: 10-3600
 .1.3.6.1.4.1.9.9.800.1.1.20.1.4
cMTSessionParamsInactivityTimeout
This object specifies the interval that the responder
wait without any requests from the initiator before
removing a particular session.

The inactivity timeout needs to be at least 3 times of
the sessi…
scondsUnsigned32r/w
Constraints:
range: 1-10800
 .1.3.6.1.4.1.9.9.800.1.1.20.1.5
cMTSessionParamsHistoryBuckets
This object specifies the number of buckets of statistics
retained. Each bucket will contain complete set of metrics
collected for all hops in one iteration.
bucketsUnsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.800.1.1.20.1.6
cMTSessionParamsRouteChangeReactiontime
This object specifies the amount of time the initiator should
wait after receiving the first route change, before reacting to
further route change notifications. Range is from 0 to 60.
secondsUnsigned32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.9.9.800.1.1.20.1.7

cMTMediaMonitorProfileTable

table
.1.3.6.1.4.1.9.9.800.1.1.21 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTMediaMonitorProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTMediaMonitorProfileTable' 
This table lists the media monitor profiles configured on the
device.
cMTMediaMonitorProfileEntry row .1.3.6.1.4.1.9.9.800.1.1.21.1
An entry represents a media monitor profile that can be
associated with a Mediatrace session contained by the
cMTSessionTable.

The entry is uniquely identified by cMTMediaMonitorProfileName.
A row created …
Indexes
Column Syntax OID
cMTMediaMonitorProfileName
This object specifies the name of the Mediatrace media monitor
profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.21.1.1
cMTMediaMonitorProfileRowStatus
This object specifies the status of the media monitor profile.
Only CreateAndGo and active status is supported.

In order for this object to become active cMTMediaMonitorProfileName
must be defined. All…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.21.1.2
cMTMediaMonitorProfileMetric
This object specifies the type of metrics group to be
collected in addition to basic IP metrics. Specify value
as RTP if metrics from 'Metric-List RTP' are desired
and 'TCP' if metrics in 'Metric-List TCP' is desired.
Enumerationr/w
Enumerated Values:
1rtp
2tcp
 .1.3.6.1.4.1.9.9.800.1.1.21.1.3
cMTMediaMonitorProfileInterval
This object specifies the sampling interval for the media
monitor profile.
secondsUnsigned32r/w
Constraints:
range: 10-120
 .1.3.6.1.4.1.9.9.800.1.1.21.1.4
cMTMediaMonitorProfileRtpMaxDropout
This object specifies the maximum number of dropouts allowed
when sampling RTP monitoring metrics.
packetsUnsigned32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.9.9.800.1.1.21.1.5
cMTMediaMonitorProfileRtpMaxReorder
This object specifies the maximum number of reorders allowed
when sampling RTP monitoring metrics.
packetsUnsigned32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.9.9.800.1.1.21.1.6
cMTMediaMonitorProfileRtpMinimalSequential
This object specifies the minimum number of sequental packets
required to identify a stream as being an RTP flow.
packetsUnsigned32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.9.9.800.1.1.21.1.7

cMTSystemProfileTable

table
.1.3.6.1.4.1.9.9.800.1.1.22 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTSystemProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTSystemProfileTable' 
This table lists the system profiles configured on the
device.
cMTSystemProfileEntry row .1.3.6.1.4.1.9.9.800.1.1.22.1
An entry represents a system profile that can be associated
with a Mediatrace session contained by the cMTSessionTable.

Each entry is uniquely identified by name specified
by cMTSystemProfileName object. …
Indexes
Column Syntax OID
cMTSystemProfileName
This object specifies the name of the Mediatrace system
profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.22.1.1
cMTSystemProfileRowStatus
This object specifies the status of the system profile.
Only CreateAndGo and active status is supported.

In order for this object to become active cMTSystemProfileName
must be defined. All other object…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.22.1.2
cMTSystemProfileMetric
This object specifies the type of metrics group to be
collected in addition to basic IP metrics. Specify
'interface' if metrics from 'Metric-List-Interface'
are desired. Specify 'cpu' if metrics in 'Metric-List-CPU'…
Enumerationr/w
Enumerated Values:
1interface
2cpu
3memory
 .1.3.6.1.4.1.9.9.800.1.1.22.1.3

cMTSessionTable

table
.1.3.6.1.4.1.9.9.800.1.1.23 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTSessionTable' 
This table lists the Mediatrace sessions configured on the
device.
cMTSessionEntry row .1.3.6.1.4.1.9.9.800.1.1.23.1
A list of objects that define specific configuration for
the session of Mediatrace.

The entry is uniquely identified by cMTSessionNumber.
A row created in this table will be shown in 'show running'
command…
Indexes
Column Syntax OID
cMTSessionNumber
This object specifies an arbitrary integer-value that uniquely
identifies a Mediatrace session.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.800.1.1.23.1.2
cMTSessionRowStatus
This object indicates the status of Mediatrace session. Only
CreateAndGo and active status is supported. Following columns
must be specified in order to activate the session:
- cMTSessionPathSpecifierName
- cM…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.23.1.3
cMTSessionPathSpecifierName
This object specifies the name of the Mediatrace path
specifier profile associated with the session.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.23.1.4
cMTSessionParamName
This object specifies the name of Mediatrace session
parameter associated with the session.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.23.1.5
cMTSessionProfileName
This object specifies the name of the Mediatrace metric
profile associated with the session.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.23.1.6
cMTSessionFlowSpecifierName
This object specifies the name of the Mediatrace flow
specifier profile associated with the session. Flow
specifier is not required if system profile is attached
to the session. In this case, media monitor
profile …
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.1.23.1.7
cMTSessionTraceRouteEnabled
This object specifies if traceroute is enabled for this
session.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.800.1.1.23.1.8

cMTScheduleTable

table
.1.3.6.1.4.1.9.9.800.1.1.24 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTScheduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTScheduleTable' 
A table of Mediatrace scheduling specific definitions.
Each entry in this table schedules a cMTSessionEntry 
created via the cMTSessionTable object.
cMTScheduleEntry row .1.3.6.1.4.1.9.9.800.1.1.24.1
A list of objects that define specific configuration for
the scheduling of Mediatrace operations.

A row is created when a session is scheduled to make it active.
Likewise, a row is destroyed when the sessi…
Indexes
Column Syntax OID
cMTScheduleRowStatus
This objects specifies the status of Mediatrace session
schedule. Only CreateAndGo and destroy operations are
permitted on the row.

All objects can assume default values.

The schedule sta…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.800.1.1.24.1.1
cMTScheduleStartTime
This object specifies the start time of the scheduled
session.
SNMPv2-TCTimeStampr/w
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.800.1.1.24.1.2
cMTScheduleLife
This object specifies the duration of the session in seconds.
secondsUnsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.800.1.1.24.1.3
cMTScheduleEntryAgeout
This object specifies the amount of time after which
mediatrace session entry will be removed once the life
of session is over and session is inactive.
secondsUnsigned32r/w
Constraints:
range: 0-2073600
 .1.3.6.1.4.1.9.9.800.1.1.24.1.4
cMTScheduleRecurring
This object specifies whether the schedule is recurring
schedule. This object can be used when a periodic session
is to be executed everyday at certain time and for certain
life.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.800.1.1.24.1.5

cMTPathTable

table
.1.3.6.1.4.1.9.9.800.1.2.1 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTPathTable' 
List of paths discovered by a mediatrace session.
cMTPathEntry row .1.3.6.1.4.1.9.9.800.1.2.1.1
An entry in cMTPathTable represents a Mediatrace path
discovered by a session.

This table contains information about the hops (Mediatrace or
non-Mediatrace) discovered during a specific request.
The Pat…
Indexes
Column Syntax OID
cMTSessionLifeNumber
This object specifies a life for a conceptual statistics
row.

For a particular value of cMTSessionLifeNumber, the agent
assigns the first value of 0 to the current (latest) life,
with 1 being the next …
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.9.9.800.1.2.1.1.1
cMTBucketNumber
This object is index of the list of statistics buckets
stored. A statistics bucket corresponds to data collected
from each hop in one run of the periodic mediatrace
session. Bucket with Index value of 0 is the bucke…
Unsigned32
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.800.1.2.1.1.2
cMTPathHopNumber
This object specifies the hop number for a Mediatrace Path.
This hop can be either Mediatrace or Non-Mediatrace node.
The hop number is relative to the initiator with 0 being
used to identify initiator itself, 1 for n…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.800.1.2.1.1.3
cMTPathHopAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTPathHopAddrType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.2.1.1.4
cMTPathHopAddr
This object indicates IP Address type of the hop on a
Mediatrace Path.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.1.1.5
cMTPathHopType
This object indicates the type of the hop on a Mediatrace
path. Currently, only two types are present - mediatrace(1)
and traceroute(2).
A hop is of type 'mediatrace' if it is discovered by only
mediatrace or by both…
Enumeration
Enumerated Values:
1mediatrace
2traceroute
 .1.3.6.1.4.1.9.9.800.1.2.1.1.6
cMTPathHopAlternate1AddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTPathHopAlternate1AddrType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.2.1.1.7
cMTPathHopAlternate1Addr
This object indicates the IP Address of the first alternate hop
on a traceroute path.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.1.1.8
cMTPathHopAlternate2AddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTPathHopAlternate2AddrType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.2.1.1.9
cMTPathHopAlternate2Addr
This object indicates the IP Address of the second alternate
hop on a traceroute path.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.1.1.10
cMTPathHopAlternate3AddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTPathHopAlternate3AddrType.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.2.1.1.11
cMTPathHopAlternate3Addr
This object indicates the IP Address of the third alternate hop
on a traceroute path.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.1.1.12

cMTHopStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTHopStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTHopStatsTable' 
An entry in cMTHopStatsTable represents a hop on the
path associated to a Mediatrace session.  
          
This table contains information about particular hop 
(Mediatrace or non-Mediatrace) such as the address,
type of hop, etc.
          
A single row corresponds to a hop on the Mediatrace
path discovered for a session and is uniquely 
identified by cMTSessionNumber, cMTSessionLifeNumber,
cMTBucketNumber,cMTHopStatsAddrType and cMTHopStatsAddr.
          
The created rows are destroyed when the device undergoes 
a restart.
cMTHopStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.2.1
An entry in cMTHopStatsTable
Indexes
Column Syntax OID
cMTHopStatsMaskBitmaps
This object indicates whether the corresponding instances of
these statistics fields in the table are supported. It also
indicates if the statistics data are collected. There are 2
bits for each corresponding field.
Bits
Enumerated Values:
0mediatraceTtlUnsupported
1mediatraceTtlUncollected
2collectionStatsUnsupported
3collectionStatsUncollected
4ingressInterfaceUnsupported
5ingressInterfaceUncollected
6egressInterfaceUnsupported
7egressInterfaceUncollected
 .1.3.6.1.4.1.9.9.800.1.2.2.1.1
cMTHopStatsAddrType
This object specifies the type of IP address specified by
the corresponding instance of cMTHopStatsAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.800.1.2.2.1.2
cMTHopStatsAddr
This object specifies the IP Address of the hop on a
Mediatrace Path. This value is obtained from
CMTPathHopAddr in cMTPathTable.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.2.1.3
cMTHopStatsName
This object indicates the name for this hop. This can
be either the hostname or the IP address for the hop.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.2.1.4
cMTHopStatsMediatraceTtl
This object indicates the hop limit of the corresponding
traffic flow.

If version 4 of the IP carries the traffic flow, then the value
of this column corresponds to the 'Time to Live' field of the
IP head…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.800.1.2.2.1.5
cMTHopStatsCollectionStatus
This object indicates the operational status of data being
collected on the hop for a specific session:

'success'
The hop is actively collecting and responding with
data.
…
Enumeration
Enumerated Values:
1success
2notSuccess
 .1.3.6.1.4.1.9.9.800.1.2.2.1.6
cMTHopStatsIngressInterface
This object indicates the interface on the responder that
receives the Mediatrace request from the initiator.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.2.1.7
cMTHopStatsEgressInterface
This object indicates the interface on the responder which
is used to forward the Mediatrace request from the initiator
towards destination in the path specifier.

Value of 'None' will be shown if th…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.2.1.8

cMTTraceRouteTable

table
.1.3.6.1.4.1.9.9.800.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTTraceRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTTraceRouteTable' 
This table lists the hops discovered by traceroute
executed from the initiator.  These are the hops 
which are on media flow path but on which mediatrace 
is not enabled or is not supported.
cMTTraceRouteEntry row .1.3.6.1.4.1.9.9.800.1.2.3.1
An entry in cMTTraceRouteTable represents a Traceroute
hop on the path associated to a Mediatrace session.

The created rows are destroyed when the device undergoes
a restart.
Indexes
Column Syntax OID
cMTTraceRouteHopNumber
This object indicates the hop number of Traceroute host
relative to the Initiator. It start with 1 and increments
as we go farther from the Initiator.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.3.1.1
cMTTraceRouteHopRtt
This object indicates RTT. The time it takes for a packet
to get to a hop and back, displayed in milliseconds. (ms).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.3.1.2

cMTSessionStatusTable

table
.1.3.6.1.4.1.9.9.800.1.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTSessionStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTSessionStatusTable' 
This table contains aggregate data maintained by Mediatrace
for session status.
cMTSessionStatusEntry row .1.3.6.1.4.1.9.9.800.1.2.4.1
An entry in cMTSessionStatusTable represents information
about a Mediatrace session.

This table contains information about particular session
such as global session identifier, operation state and
time to…
Indexes
Column Syntax OID
cMTSessionStatusBitmaps
This object indicates whether the corresponding instances of
these statistics fields in the table are supported. It also
indicates if the statistics are collected. There are 2 bits for
each field.
Bits
Enumerated Values:
0globalSessionIdUusupport
1globalSessionIdUncollected
2operationStateUusupport
3operationStateUncollected
4operationTimeToLiveUusupport
5operationTimeToLiveUncollected
 .1.3.6.1.4.1.9.9.800.1.2.4.1.1
cMTSessionStatusGlobalSessionId
This object indicates a globally unique Id to identify a
session throughout the network.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.4.1.2
cMTSessionStatusOperationState
This object indicates the operation status of the session.

pending - Session is not currently active.
active - Session is in active state.
inactive - Session is not active but it has not aged out.
sleep -…
Enumeration
Enumerated Values:
1pending
2active
3inactive
4sleep
 .1.3.6.1.4.1.9.9.800.1.2.4.1.3
cMTSessionStatusOperationTimeToLive
This object indicates how long the session operation will
last.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.4.1.4

cMTSessionRequestStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.5 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTSessionRequestStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTSessionRequestStatsTable' 
This table contains aggregate data maintained by Mediatrace
for session request status.
cMTSessionRequestStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.5.1
An entry in cMTSessionRequestStatsTable represents status
for each request for a particular session.

A single row corresponds to a request sent by a
particular Mediatrace session and is uniquely
identifie…
Indexes
Column Syntax OID
cMTSessionRequestStatsBitmaps
This object indicates whether the corresponding instances of
these stats fields in the table are supported. It also
indicates if the stats data are collected. There are 2 bits
for each corresponding field.
Bits
Enumerated Values:
0requestTimestampUnsupport
1requestTimestampUncollected
2requestStatusUnsupport
3requestStatusUncollected
4tracerouteStatusUnsupport
5tracerouteStatusUncollected
6routeIndexUnsupport
7routeIndexUncollected
8numberOfMediatraceHopsUnsupport
9numberOfMediatraceHopsUncollected
10numberOfNonMediatraceHopsUnsupport
11numberOfNonMediatraceHopsUncollected
12numberOfValidHopsUnsupport
13numberOfValidHopsUncollected
14numberOfErrorHopsUnsupport
15numberOfErrorHopsUncollected
16numberOfNoDataRecordHopsUnsupport
17numberOfNoDataRecordHopsUncollected
18metaGlobalIdUnsupport
19metaGlobalIdUncollected
20metaMultiPartySessionIdUnsupport
21metaMultiPartySessionIdUncollected
22metaAppNameUnsupport
23metaAppNameUncollected
 .1.3.6.1.4.1.9.9.800.1.2.5.1.1
cMTSessionRequestStatsRequestTimestamp
This object indicates the value of request time when the
request was sent our by the initiator for this particular
session.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.800.1.2.5.1.2
cMTSessionRequestStatsRequestStatus
This object indicates the status of request for the session.
Enumeration
Enumerated Values:
1completed
2notCompleted
 .1.3.6.1.4.1.9.9.800.1.2.5.1.3
cMTSessionRequestStatsTracerouteStatus
This object indicates the status of traceroute for the
session.
Enumeration
Enumerated Values:
1completed
2notCompleted
 .1.3.6.1.4.1.9.9.800.1.2.5.1.4
cMTSessionRequestStatsRouteIndex
This object indicates the route index for the session
request. It signifies the number of times a route
has changed for a particular session. 0 signifies
no route change.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.5.1.5
cMTSessionRequestStatsNumberOfMediatraceHops
This object indicates the number of Mediatrace hops in
the path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.5.1.6
cMTSessionRequestStatsNumberOfNonMediatraceHops
This object indicates the number of non-Mediatrace hops in the
path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.5.1.7
cMTSessionRequestStatsNumberOfValidHops
This object indicates the number of hops with valid data
report.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.5.1.8
cMTSessionRequestStatsNumberOfErrorHops
This object indicates the number of hops with error report.
These hops are not able to return the statistics due to
some issue.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.5.1.9
cMTSessionRequestStatsNumberOfNoDataRecordHops
This object indicates the number of hops with no data record.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.5.1.10
cMTSessionRequestStatsMDGlobalId
This object indicates the meta-data global Id for this
session.
OctetString .1.3.6.1.4.1.9.9.800.1.2.5.1.11
cMTSessionRequestStatsMDMultiPartySessionId
This object indicates the meta-data Multi Party Session Id for
this session.
OctetString .1.3.6.1.4.1.9.9.800.1.2.5.1.12
cMTSessionRequestStatsMDAppName
This object indicates the meta-data AppName for this session.
OctetString .1.3.6.1.4.1.9.9.800.1.2.5.1.13

cMTCommonMetricStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.6 · 1 row entry · 14 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTCommonMetricStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTCommonMetricStatsTable' 
This table contains the list of entries representing
common IP metrics values for a particular mediatrace 
session on particular hop.
cMTCommonMetricStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.6.1
An entry in cMTCommonMetricStatsTable represents
common media monitor profile information of a hop on the
path associated to a Mediatrace session such as flow sampling
time stamp, packets dropped, IP TTL, etc.
…
Indexes
Column Syntax OID
cMTCommonMetricsBitmaps
This object indicates whether the corresponding instances of
these stats fields in the table are supported. It also
indicates if the stats data are collected. There are 2 bits
for each field.
Bits
Enumerated Values:
0flowSamplingStartTimeUnsupported
1flowSamplingStartTimeUncollected
2ipPktDroppedUnsupported
3ipPktDroppedUncollected
4ipPktCountUnsupported
5ipPktCountUncollected
6ipOctetsUnsupported
7ipOctetsUncollected
8ipByteRateUnsupported
9ipByteRateUncollected
10ipDscpUnsupported
11ipDscpUncollected
12ipTtlUnsupported
13ipTtlUncollected
14flowCounterUnsupported
15flowCounterUncollected
16flowDirectionUnsupported
17flowDirectionUncollected
18lossMeasurementUnsupported
19lossMeasurementUncollected
20mediaStopOccurredUnsupported
21mediaStopOccurredUncollected
22routeForwardUnsupported
23routeForwardUncollected
24ipProtocolUnsupported
25ipProtocolUncollected
 .1.3.6.1.4.1.9.9.800.1.2.6.1.2
cMTCommonMetricsFlowSamplingStartTime
This object defines the the timestamp when the statistics
were collected on the responder.
CiscoNTPTimeStamp
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.800.1.2.6.1.3
cMTCommonMetricsIpPktDropped
This object indicates number of packet drops observed
on the flow being monitored on this hop from flow sampling
start time in window of 'sample interval' length.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.6.1.4
cMTCommonMetricsIpOctets
This object indicates the total number of octets contained by
the packets processed by the Mediatrace request for the
corresponding traffic flow.
octetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.6.1.5
cMTCommonMetricsIpPktCount
This object indicates the total number of packets processed by
the Mediatrace request for the corresponding traffic flow.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.6.1.6
cMTCommonMetricsIpByteRate
This object indicates the average packet rate at which the
Mediatrace request is processing data for the corresponding
traffic flow. This value is cumulative over the lifetime of
the traffic flow.
packets per secondSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.6.1.7
cMTCommonMetricsIpDscp
This object indicates the DSCP value of the corresponding
traffic flow.

If version 4 of the IP carries the traffic flow, then the value
of this column corresponds to the DSCP part of 'Type of
Service' fie…
Unsigned32
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.800.1.2.6.1.8
cMTCommonMetricsIpTtl
This object indicates the hop limit of the corresponding
traffic flow.

If version 4 of the IP carries the traffic flow, then the value
of this column corresponds to the 'Time to Live' field of the
IP head…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.800.1.2.6.1.9
cMTCommonMetricsFlowCounter
This object indicates the number of traffic flows currently
monitored by the Mediatrace request.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.6.1.10
cMTCommonMetricsFlowDirection
This object indicates the direction of the traffic flow where
the data is monitored :
'unknown'
The SNMP entity does not know the direction of the
traffic flow at the point data is collec…
Enumeration
Enumerated Values:
1unknown
2ingress
3egress
 .1.3.6.1.4.1.9.9.800.1.2.6.1.11
cMTCommonMetricsLossMeasurement
This object indicates the loss measurement.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.9.9.800.1.2.6.1.12
cMTCommonMetricsMediaStopOccurred
This object indicates the media stop occurred.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.9.9.800.1.2.6.1.13
cMTCommonMetricsRouteForward
This object indicates routing or forwarding status i.e.
whether the packet is forwarded or dropped for the flow.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.800.1.2.6.1.14
cMTCommonMetricsIpProtocol
This table contains entry to specify the media
Metric-list for the particular Mmediatrace session on
the hop.
CiscoMediatraceSupportProtocol
Type Values:
6tcp
17udp
 .1.3.6.1.4.1.9.9.800.1.2.6.1.15

cMTRtpMetricStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.7 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTRtpMetricStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTRtpMetricStatsTable' 
This table contains aggregate data maintained by Mediatrace
for traffic flows for which it is computing RTP metrics.
cMTRtpMetricStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.7.1
An entry in cMTRtpMetricStatsTable represents RTP related
information of a hop on the path associated to a Mediatrace
session such as bit rate, octets, etc.

The devices creates a row in the cMTRtpMetricS…
Indexes
No indexes recorded
Column Syntax OID
cMTRtpMetricsBitmaps
This object indicates whether the corresponding instances of
these statistics fields in the table are supported. It also
indicates if the stats data are collected. There are 2 bits
for each field.
Bits
Enumerated Values:
0bitRateunSupport
1bitRateunCollected
2octetsunSupport
3octetsunCollected
4pktsunSupport
5pktsunCollected
6jitterunSupport
7jitterunCollected
8lostPktsunSupport
9lostPktsunCollected
10expectedPktsunSupport
11expectedPktsunCollected
12lostPktEventsunSupport
13lostPktEventsunCollected
14losspercentUnsupport
15losspercentUncollected
 .1.3.6.1.4.1.9.9.800.1.2.7.1.2
cMTRtpMetricsBitRate
This object indicates the average bit rate at which the
corresponding Mediatrace request is processing data for
the corresponding traffic flow. This value is
cumulative over the lifetime of the traffic flow.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.7.1.3
cMTRtpMetricsOctets
This object indicates the total number of octets contained
by the packets processed by the Mediatrace request for the
corresponding traffic flow.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.7.1.4
cMTRtpMetricsPkts
This object indicates the total number of packets processed by
the corresponding Mediatrace request for the corresponding
traffic flow.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.7.1.5
cMTRtpMetricsJitter
This object indicates the inter-arrival jitter for the traffic
flow.
secondsCISCO-FLOW-MONITOR-TC-MIBFlowMetricValue
Type Constraints:
range: -1000000000..1000000000
 .1.3.6.1.4.1.9.9.800.1.2.7.1.6
cMTRtpMetricsLostPkts
This object indicates the number of RTP packets lost for the
traffic flow.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.7.1.7
cMTRtpMetricsExpectedPkts
This object indicates the number of RTP packets expected for
the traffic flow.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.7.1.8
cMTRtpMetricsLostPktEvents
This object indicates the number of packet loss events observed
by the Mediatrace request for the corresponding traffic flow.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.7.1.9
cMTRtpMetricsLossPercent
This object indicates the percentage of packages are lost per
ten thousand packets in a traffic flow.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.800.1.2.7.1.10

cMTTcpMetricStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.8 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTTcpMetricStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTTcpMetricStatsTable' 
This table contains aggregate data maintained by Mediatrace
for traffic flows for which it is computing TCP
metrics.
cMTTcpMetricStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.8.1
An entry in cMTTcpMetricStatsTable represents TCP information
of a hop on the path associated to a Mediatrace session such
as byte count, round trip delay, etc.

The devices creates a row in the cMTTcpMet…
Indexes
No indexes recorded
Column Syntax OID
cMTTcpMetricBitmaps
This object indicates whether the corresponding instances of
these stats fields in the table are supported. It also
indicates if the stats data are collected. There are 2 bits
for each field.
Bits
Enumerated Values:
0mediaByteCountUnsupport
1mediaByteCountUncollected
2connectRoundTripDelayUnsupport
3connectRoundTripDelayUncollected
4lostEventCountUnsupport
5lostEventCountUncollected
 .1.3.6.1.4.1.9.9.800.1.2.8.1.2
cMTTcpMetricMediaByteCount
This object indicates the number of bytes for the packets
observed by the Mediatrace session for the corresponding
flow.
CISCO-FLOW-MONITOR-TC-MIBFlowMetricValue
Type Constraints:
range: -1000000000..1000000000
 .1.3.6.1.4.1.9.9.800.1.2.8.1.3
cMTTcpMetricConnectRoundTripDelay
This object indicates the round trip time for the packets
observed by the Mediatrace session for the corresponding
flow. The round trip time is defined as the length of time
it takes for a TCP segment transmission an…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.8.1.4
cMTTcpMetricLostEventCount
This object indicates the number of packets lost for the
traffic flow.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.800.1.2.8.1.5

cMTSystemMetricStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.9 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTSystemMetricStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTSystemMetricStatsTable' 
A list of objects which accumulate the system metrics results
of a particular node for that path.
cMTSystemMetricStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.9.1
An entry in cMTSystemMetricStatsTable represents
CPU or memory utilization information of a hop on the
path associated to a Mediatrace session such as five
minutes CPU utilization, memory utilization, etc.
…
Indexes
Column Syntax OID
cMTSystemMetricBitmaps
This object indicates whether the corresponding instances of
these stats fields in the table are supported. It also
indicates if the stats data are collected. There are 2 bits
for each field.
Bits
Enumerated Values:
0cpuOneMinuteUtilizationUnsupport
1cpuOneMinuteUtilizationUncollected
2cpuFiveMinutesUtilizationUnsupport
3cpuFiveMinutesUtilizationUncollected
4memoryMetricsUnsupport
5memoryMetricsUncollected
 .1.3.6.1.4.1.9.9.800.1.2.9.1.1
cMTSystemMetricCpuOneMinuteUtilization
This object indicates the overall CPU busy percentage in the
last 1 minute period for the network element
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.800.1.2.9.1.2
cMTSystemMetricCpuFiveMinutesUtilization
This object indicates the overall CPU busy percentage in
the last 5 minute period for the network element
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.800.1.2.9.1.3
cMTSystemMetricMemoryUtilization
This object indicates the overall memory usage percentage for
the node.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.800.1.2.9.1.4

cMTInterfaceMetricStatsTable

table
.1.3.6.1.4.1.9.9.800.1.2.10 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMTInterfaceMetricStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MEDIATRACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MEDIATRACE-MIB::cMTInterfaceMetricStatsTable' 
This table contains aggregate data of interface information for
the network nodes.
cMTInterfaceMetricStatsEntry row .1.3.6.1.4.1.9.9.800.1.2.10.1
An entry in cMTInterfaceMetricStatsTable represents
interface information of a hop on the path associated
to a Mediatrace session such as ingress interface speed,
egress interface speed, etc.

The device…
Indexes
Column Syntax OID
cMTInterfaceBitmaps
This object indicates whether the corresponding instances of
these stats fields in the table are supported. It also
indicates if the stats data are collected. There are 2 bits
for each field.
Bits
Enumerated Values:
0inSpeedUnsupport
1inSpeedUncollected
2outSpeedUnsupport
3outSpeedUncollected
4outDiscardsUnsupport
5outDiscardsUncollected
6inDiscardsUnsupport
7inDiscardsUncollected
8outErrorsUnsupport
9outErrorsUncollected
10inErrorsUnsupport
11inErrorsUncollected
12outOctetsUnsupport
13outOctetsUncollected
14inOctetsUnsupport
15inOctetsUncollected
 .1.3.6.1.4.1.9.9.800.1.2.10.1.2
cMTInterfaceOutSpeed
This object indicates the egress interface's current bandwidth
in bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation can be
made, this object should contain the no…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.3
cMTInterfaceInSpeed
This object indicates an estimate of the ingress interface's
current bandwidth in bits per second. Currently bandwidth
above the maximum value 4,294,967,295 is not supported and it
will show the maximum for this cond…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.4
cMTInterfaceOutDiscards
This object indicates the number of outbound packets which were
chosen to be discarded even though no errors had been detected
to prevent their being transmitted. One possible reason for
discarding such a packet could …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.5
cMTInterfaceInDiscards
This object indicates the number of inbound packets which were
chosen to be discarded even though no errors had been detected
to prevent their being deliverable to a higher-layer protocol.
One possible reason for disc…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.6
cMTInterfaceOutErrors
This object indicates the error packet number. For
packet-oriented interfaces, the number of outbound packets that
could not be transmitted because of errors. For
character-oriented or fixed-length interfaces, the num…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.7
cMTInterfaceInErrors
This object indicates the error packet number. For
packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a
higher-layer protocol. For character-orien…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.8
cMTInterfaceOutOctets
This object indicates the total number of octets transmitted
out of the interface, including framing characters.

Discontinuities in the value of this counter can occur at
re-initialization of the manageme…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.9
cMTInterfaceInOctets
This object indicates the total number of octets received on
the interface, including framing characters.

Discontinuities in the value of this counter can occur at
re-initialization of the management syst…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.800.1.2.10.1.10