CISCO-LWAPP-SYS-MIB Table View

This table represents of the network route
entries of a switch.

clsNetworkRouteConfigEntry row .1.3.6.1.4.1.9.9.618.1.1.5.5.1.1

Each entry in this table represents the network
route of a switch.

Indexes

clsNetworkRouteIPAddressType clsNetworkRouteIPAddress

Column	Syntax	OID
clsNetworkRouteIPAddressType This objects represents network route IP address type.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.1
clsNetworkRouteIPAddress This objects represents the network route IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.2
clsNetworkRoutePrefixLength This object specifies the prefix length for route Inet address.	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.3
clsNetworkRouteGatewayType This object specifies gateway IP type of network route.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.4
clsNetworkRouteGateway This object specifies gateway IP of network route.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.5
clsNetworkRouteStatus This object specifies status column for this row and used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.6

This table represents multiple syslog servers to
which the the syslog messages will be sent to by the
controller.

cLSysLogConfigEntry row .1.3.6.1.4.1.9.9.618.1.1.6.1.1

Each entry in this table provides information about
the host to which the syslog messages will be sent to.

Indexes

cLSysLogServerIndex

Column	Syntax	OID
cLSysLogServerIndex This object represents the index of the host to which syslog messages will be sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.1.6.1.1.1
cLSysLogAddressType This object represents the IP address type of the host to which syslog messages will be sent. 'DNS' is used when the hostname of the server is configured.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.618.1.1.6.1.1.2
cLSysLogAddress This object specifies the IP address or hostname of the host to which syslog messages will be sent.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.1.6.1.1.3
cLSysLogHostRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.618.1.1.6.1.1.4

This table represent the server details which
will be used by the controller to upload/
download files. The conceptual rows are 
statically populated by the agent during 
system boot up.

clsTransferConfigEntry row .1.3.6.1.4.1.9.9.618.1.1.8.1.1

Each entry in this table provides information about
the server to which the controller will upload/download files
represented by clsTransferType and clsTransferMode.

Indexes

clsTransferType clsTransferMode

Column	Syntax	OID
clsTransferType This object represents the type of operation mode of the server by the controller. A value of download indicates that, mode of transfer is download A value of upload indicates that, mode of transfer is upload.	Enumeration Enumerated Values: 1 download 2 upload	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.1
clsTransferMode This object represents the protocol used by the server and the controller to transfer a file. A value of tftp indicates that, transfer mode is tftp. A value of ftp indicates that, transfer mode is ftp. A value of sftp i…	Enumeration Enumerated Values: 1 tftp 2 ftp 3 sftp 4 usb	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.2
clsTransferServerAddressType This object specifies the server IP address type to which the controller will transfer the file.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.3
clsTransferServerAddress This object specifies the server IP address to which the controller will transfer the file. It is governed by clsTransferServerAddressType.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.4
clsTransferPath This object specifies the directory path for file transfer. The format depends on the host server. e.g. /tftpboot/code/ - in case of UNIX server c:\tftp\code - in case of DOS/Windows server	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.5
clsTransferFilename This object specifies the file name for the file being transferred from the controller. An example would be file path set to c:\tftp\code\ and file name set to e1r1v1.opr.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.6
clsTransferFtpUsername This object specifies the FTP username for transferring file on the server. This is valid for FTP/SFTP transfer mode parameters.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.7
clsTransferFtpPassword This object specifies the FTP password for transferring file on the server. This is valid for SFTP/FTP transfer mode parameters. It returns '****' when queried.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.8
clsTransferFtpPortNum This object specifies the port number to be used by the FTP protocol while connecting to the server. This is valid only for FTP transfer mode.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.9
clsTransferTftpMaxRetries This object specifies maximum number of retries to be allowed for a TFTP message packet before aborting the transfer operation. This is valid only for TFTP transfer mode.	Unsigned32r/w Constraints: range: 1-254	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.10
clsTransferTftpTimeout This object specifies timeout in seconds for a TFTP message packet. This is valid only for TFTP transfer mode.	secondsUnsigned32r/w Constraints: range: 1-254	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.11
clsTransferStart This object specifies whether the file transfer operation is initiated in active or standby. A value of none indicates that, no operation begins. A value of initiate indicates that, transfer of file begins on active. …	Enumerationr/w Enumerated Values: 1 none 2 initiate 3 initiatePeer	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.12
clsTransferStatus This object represents the current status of a file transfer operation. The following are valid only when clsTransferType is 'download' :- bootBreakOff(14), invalidTarFile(15). A value of unknown(1) indicates that, unk…	Enumeration Enumerated Values: 1 unknown 2 notInitiated 3 transferStarting 4 errorStarting 5 wrongFileType 6 updatingConfig 7 invalidConfigFile 8 writingToFlash 9 failureWritingToFlash 10 checkingCRC 11 failedCRC 12 unknownDirection 13 transferSuccessful 14 transferFailed 15 bootBreakOff 16 invalidTarFile	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.13
clsTransferStatusString This object represents the current status of a file transfer operation in human readable format.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.618.1.1.8.1.1.14

This table represents the information about the
802.11 LWAPP Access Points that have joined to 
the controller.
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations, after they join the
controller.

clsApTransferEntry row .1.3.6.1.4.1.9.9.618.1.1.8.2.1.1

Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined to
the controller.
Entries are removed when the APs lose their
association with the controller due to loss
of communica…

Indexes

clsApTransferSysMacAddress

Column	Syntax	OID
clsApTransferSysMacAddress This object represents the radio MAC address of the AP and uniquely identifies an entry in this table.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.1
clsApPrimaryVers This object represents the primary image version of AP	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.2
clsApBackupVers This object represents the backup image version of AP	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.3
clsApPredStatus This object represents the status of predownload, Initiated/failed/predownloading/backedoff	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.4
clsApPredFailReason This object represents Failure reason for image download.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.5
clsApPredRetryCount This object represents number of retries by AP to download the image	Unsigned32 Constraints: range: 1-254	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.6
clsApPredNextRetryTime This object represents the next retry time of image download by AP.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.7

This table represents the entries for physical port related
parameters.

clsPortModeConfigEntry row .1.3.6.1.4.1.9.9.618.1.1.14.1.1

Each entry contains the switch's physical port,
phyical mode related attribues. Each entry exists
for available physical interface. Entries
cannot be created or deleted by the user.

Indexes

clsPortDot1dBasePort

Column	Syntax	OID
clsPortDot1dBasePort This object represents unique unsigned integer value which identifies the base port number.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.618.1.1.14.1.1.1
clsPortModePhysicalMode The object specifies the speed mode of switch port. A value of autoNegotiate indicates that, port senses speed and negotiates with the port at the other end of the link for data transfer operation A value of half10 in…	Enumerationr/w Enumerated Values: 1 autoNegotiate 2 half10 3 full10 4 half100 5 full100 6 full1000sx 7 half1000 8 full1000 9 half10000 10 full10000	.1.3.6.1.4.1.9.9.618.1.1.14.1.1.2
clsPortModePhysicalStatus This object represents the switch port's current physical speed status. A value of unknown indicates that, the speed of the port is not known A value of autoNegotiate indicates that, port senses speed and negotiates w…	Enumeration Enumerated Values: 1 unknown 2 autonegotiate 3 half10 4 full10 5 half100 6 full100 7 full1000sx 8 half1000 9 full1000 10 half10000 11 full10000 12 half2500 13 full2500 14 half5000 15 full5000	.1.3.6.1.4.1.9.9.618.1.1.14.1.1.3
clsPortModeSfpType This object represents the SFP type of the port. When there is no SFP connected to the port, the string is represented with value as Not Present.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.1.14.1.1.4
clsPortUpDownCount This object represents the total number of up/down count of the port. Every time the value of ifOperStatus is changed, this MIB object should be incremented.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.1.14.1.1.5
clsPortModeMaxSpeed The object specifies the maxspeed mode of MGIG port. A value of full1000 indicates that, port will operate at maximum autonegotiated speed of 1000mbps or less. A value of full2500 indicates that, port will operate at…	Enumerationr/w Enumerated Values: 1 autonegotiate 2 full1000 3 full2500 4 full5000	.1.3.6.1.4.1.9.9.618.1.1.14.1.1.6

This table represents the trap blacklist.
Traps in black list will be blocked while 
sending out.

clsTrapBlacklistEntry row .1.3.6.1.4.1.9.9.618.1.1.25.1.1

Each entry in this table provides the name of trap
in trap blacklist.

Indexes

clsBlacklistTrapIndex

Column	Syntax	OID
clsBlacklistTrapIndex This object represents trap uniquely in blacklist.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.1.25.1.1.1
clsTrapNameInBlacklist This object specifies name of trap in trap blacklist.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.1.25.1.1.2
clsTrapBlacklistRowStatus This is the status column for this row and used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.618.1.1.25.1.1.3

This table represents the generic icon file configuration in
the controller. It has only one argument; the icon file name
which shall be used to index the rows in this table.

clsIconCfgEntry row .1.3.6.1.4.1.9.9.618.1.1.28.1

Each entry in this table represents the icon config entry

Indexes

clsIconCfgFileName

Column	Syntax	OID
clsIconCfgFileName This object represents the icon filename	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.618.1.1.28.1.1
clsIconCfgFileType This object specifies the filetype of the icon file	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.618.1.1.28.1.2
clsIconCfgLangCode This object specifies the language code associated with the icon file	OctetStringr/w Constraints: range: 2-3	.1.3.6.1.4.1.9.9.618.1.1.28.1.3
clsIconCfgWidth This object specifies the width of the icon file	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.618.1.1.28.1.4
clsIconCfgHeight This object specifies the height of the icon file	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.618.1.1.28.1.5
clsIconCfgRowStatus This object specifies status column for this row and used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.618.1.1.28.1.6

This table represents the RAID and rebuild status.

clsRAIDStatusEntry row .1.3.6.1.4.1.9.9.618.1.2.2.1

Each entry in this table provides RAID drive status.

Indexes

clsRAIDDriveNumber

Column	Syntax	OID
clsRAIDDriveNumber This object indicates drive number in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.2.2.1.1
clsRAIDStatus This object represents the status of the drive. A value of good indicates that, hard disk in RAID volume is good. A value of bad indicates that, hard disk in RAID volume is bad. A value of badstartrebuild indicates t…	Enumeration Enumerated Values: 1 good 2 bad 3 badstartrebuild 4 rebuilding	.1.3.6.1.4.1.9.9.618.1.2.2.1.2
clsRAIDRebuildPercentage This object represents the rebuild percentage of drive. This object is applicable only when RAID status is rebuilding.	PercentSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.2.2.1.3

This table represents the test ping entries

clsSysPingTestEntry row .1.3.6.1.4.1.9.9.618.1.2.3.1

Each Entry (conceptual row) in the clsSysPingTest Table
represents a ping test id.

Indexes

clsSysPingTestId

Column	Syntax	OID
clsSysPingTestId This object represents the index of pingtest ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.618.1.2.3.1.1
clsSysPingTestIPAddressType This object specifies the IP address type	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.618.1.2.3.1.2
clsSysPingTestIPAddress This object specifies the IP address of the device to which ping test to perform	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.618.1.2.3.1.3
clsSysPingTestSendCount This object specifies the number of bytes sent	BytesInteger32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.618.1.2.3.1.4
clsSysPingTestReceivedCount This object represents the number of bytes received.	BytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.618.1.2.3.1.5
clsSysPingTestStatus This object represents status of the ping test. A value of inprogress indicates that, ping test in progress. A value of complete indicates that, ping test is complete.	Enumeration Enumerated Values: 1 inprogress 2 complete	.1.3.6.1.4.1.9.9.618.1.2.3.1.6
clsSysPingTestMaxTimeInterval This object represents maximum time interval in msec.	mSecSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.2.3.1.7
clsSysPingTestMinTimeInterval This object represents minimum time interval in msec.	mSecSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.2.3.1.8
clsSysPingTestAvgTimeInterval This object represents average time interval in msec.	mSecSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.618.1.2.3.1.9
clsSysPingTestRowStatus This is the status column for this row and used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.618.1.2.3.1.10