CISCO-LWAPP-RRM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
71

clrRrmParametersTable

table
.1.3.6.1.4.1.9.9.615.1.1.1 · 1 row entry · 25 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmParametersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmParametersTable' 
This table represents the  RRM parameters for a
802.11 interface type. Entries are automatically
created on the controller for each 802.11 interface 
type.
clrRrmParametersEntry row .1.3.6.1.4.1.9.9.615.1.1.1.1
An entry in this table corresponds to a particular
802.11 interface type.
Indexes
Column Syntax OID
clrRrmParametersType
This object uniquely represents the 802.11 interface
type for this entry.
CISCO-LWAPP-TC-MIBCLApIfType
Type Values:
1dot11bg
2dot11a
3uwb
4dot11abgn
5rlan
6dot11_6ghz
7dot11_xor_5_6ghz
 .1.3.6.1.4.1.9.9.615.1.1.1.1.1
clrRrmParametersPicoCellModedeprecated
This object specifies the 802.11 pico-cell mode.
disable - pico-cell mode is disabled.
picoCellv1 - legacy pico-cell mode is in use.
picoCellv2 - in this mode the APs to use the tuple
information from t…
Enumerationr/w
Enumerated Values:
1disable
2picoCellv1
3picoCellv2
 .1.3.6.1.4.1.9.9.615.1.1.1.1.2
clrRrmParametersChdEnable
This object specifies the state of CHD (Coverage
Hole Detection) on the controller. A value of 'true'
indicates that the detection is enabled. A value
of 'false' indicates that the detection is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.3
clrRrmParametersVoicePktCountThreshold
This object specifies the minimum threshold on the
Voice packet count required to trigger the CHD
algorithm on the controller.
packetsUnsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.615.1.1.1.1.4
clrRrmParametersVoicePktPercentThreshold
This object specifies the threshold on the percent
of Voice packets dropped, that is required to
trigger the CHD algorithm on the controller.
percentUnsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.615.1.1.1.1.5
clrRrmParametersVoiceRssiThreshold
This object specifies the RSSI threshold value for
Voice packets, that is required to trigger the CHD
algorithm on the controller.
dbmInteger32r/w
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.615.1.1.1.1.6
clrRrmParametersDataPktCountThreshold
This object specifies the minimum threshold on the
Data packet count required to trigger the CHD
algorithm on the controller.
packetsUnsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.615.1.1.1.1.7
clrRrmParametersDataPktPercentThreshold
This object specifies the threshold on the percent
of Data packets dropped, that is required to
trigger the CHD algorithm on the controller.
percentUnsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.615.1.1.1.1.8
clrRrmParametersDataRssiThreshold
This object specifies the RSSI threshold value for
Data packets, that is required to trigger the CHD
algorithm on the controller.
dbmInteger32r/w
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.615.1.1.1.1.9
clrRrmParametersDcaChannelWidth
This object specifies how the system performs DCA
channel width selection
twenty - 20MHz channel width supported by this radio.
forty - 40MHz channel width supported by this radio.
eighty - 80MHz channel width su…
Enumerationr/w
Enumerated Values:
1twenty
2forty
3eighty
4best
5oneSixty
 .1.3.6.1.4.1.9.9.615.1.1.1.1.10
clrRrmParametersMaxTxPower
This object specifies the upper limit of transmit power in dBm.
For a 802.11a network, the system will
only accept this configuration if the
bsnGlobalDot11aDynamicTransmitPowerControl is set
to 'automatic' or 'runOnc…
dBmInteger32r/w
Constraints:
range: -10-30
 .1.3.6.1.4.1.9.9.615.1.1.1.1.11
clrRrmParametersMinTxPower
This object specifies the lower limit of transmit power in dBm.
For an 802.11a network, the system will
only accept this configuration if the
bsnGlobalDot11aDynamicTransmitPowerControl
is set to 'automatic' or 'runOn…
dBmInteger32r/w
Constraints:
range: -10-30
 .1.3.6.1.4.1.9.9.615.1.1.1.1.12
clrRrmParametersTpcVersion
This object specifies the TPC(Transmission Power Control) version.
versionOne(1) - TPC would be in coverage optimal mode.
versionTwo(2) - TPC would be in interference optimal mode.
Enumerationr/w
Enumerated Values:
1versionOne
2versionTwo
 .1.3.6.1.4.1.9.9.615.1.1.1.1.13
clrRrmParametersChdNoise
This object specifies the state of noise
on the controller. A value of 'true'
indicates that the detection is enabled. A value
of 'false' indicates that the detection is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.14
clrRrmParametersChdInterference
This object specifies the state of interference
on the controller. A value of 'true'
indicates that the detection is enabled. A value
of 'false' indicates that the detection is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.15
clrRrmParametersChdLoad
This object specifies the state of load
on the controller. A value of 'true'
indicates that the detection is enabled. A value
of 'false' indicates that the detection is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.16
clrRrmParametersChdSignal
This object specifies the state of signal
on the controller. A value of 'true'
indicates that the detection is enabled. A value
of 'false' indicates that the detection is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.17
clrRrmParametersChdDevice
This object specifies the state of device detection
on the controller. A value of 'true'
indicates that the detection is enabled. A value
of 'false' indicates that the detection is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.18
clrRrmParametersMaxClients
This object specifies the maximum allowed clients per radio.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.615.1.1.1.1.19
clrRrmParametersRssiCheckEnable
This object specifies the state of RSSI low
check on the controller. A value of 'true'
indicates that the check is enabled. A value
of 'false' indicates that the check is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.20
clrRrmParametersRssiThreshold
This object specifies the RSSI threshold value for
RSSI low check.
dbmInteger32r/w
Constraints:
range: -90--60
 .1.3.6.1.4.1.9.9.615.1.1.1.1.21
clrRrmParametersOptRoamEnable
This object specifies the state of optimized
roaming feature on the controller. A value of 'true'
indicates that the feature is enabled. A value
of 'false' indicates that the feature is disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.1.1.22
clrRrmParametersOptRoamDataRate
This object specifies the data rate threshold value for
optimized roaming. A valid data rate in mbps must be entered.
mbpsInteger32r/w
Constraints:
range: 0-54
 .1.3.6.1.4.1.9.9.615.1.1.1.1.23
clrRrmParametersOptRoamInterval
This object specifies the reporting interval value for
Optimized Roaming.
secondsInteger32r/w
Constraints:
range: 5-90
 .1.3.6.1.4.1.9.9.615.1.1.1.1.24
clrRrmParametersClientNetworkPreference
This object represents the client network preference.
connectivity - RRM Algorithm has a prefereance on connectiviry of the clients
throughput - RRM Algorithm has a preference on high thoughput of the clients
defaul…
Enumerationr/w
Enumerated Values:
1default
2connectivity
3throughput
 .1.3.6.1.4.1.9.9.615.1.1.1.1.25

clrRrmTupleTable

table deprecated
.1.3.6.1.4.1.9.9.615.1.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmTupleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmTupleTable' 
A list of tuple tuning parameters that are
advertised to all APs registered under this 802.11 
interface type. This information is pushed down to 
to 802.11 clients by the APs to operate under high 
density.
Entries in this table are automatically 
created by the controller with default values.
          
Object is deprecated since controller doesn't support 
Pico cell configuration anymore.
clrRrmTupleEntry row .1.3.6.1.4.1.9.9.615.1.1.2.1
Each entry represents the tuning parameters for
an interface type. These entries are applicable
only when object clrRrmParametersPicoCellMode is
is set to 'picoCellv2'.
Pico cell is no more supported so deprecating th…
Indexes
Column Syntax OID
clrRrmTupleRxSenseThresholdMindeprecated
This object represents the minimum value configured
for receiver's sensitivity threshold.
This value must be less than the value configured for
clrRrmTupleRxSenseThresholdMax object.

Object is deprecated…
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.1
clrRrmTupleRxSenseThresholdMaxdeprecated
This object represents the maximum value configured
for receiver's sensitivity threshold.
This value must be greater than the value configured for
clrRrmTupleRxSenseThresholdMin object.

Object is depreca…
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.2
clrRrmTupleRxSenseThresholddeprecated
This object represents the current value for
receiver's sensitivity threshold. This value is sent
to the APs that join the controller. The APs in turn
propogate this value to the 802.11 clients. The client
will eith…
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.3
clrRrmTupleCcaSenseThresholdMindeprecated
This object represents the minimum value configured
for clear channel (CCA) sensitivity threshold.
This value must be less than the value configured for
clrRrmTupleCcaSenseThresholdMax object.

Object is …
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.4
clrRrmTupleCcaSenseThresholdMaxdeprecated
This object represents the maximum value configured
for clear channel (CCA) sensitivity threshold.
This value must be greater than the value configured for
clrRrmTupleCcaSenseThresholdMin object.

Object …
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.5
clrRrmTupleCcaSenseThresholddeprecated
This object represents the current value for clear
channel (CCA) sensitivity. This value is sent to the
APs that join the controller. The APs in turn propogate
this value to the 802.11 clients. The client will either …
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.6
clrRrmTupleTransmitPowerLevelMindeprecated
This object represents the minimum value configured
for transmit power level. This value must be less than
the value configured for clrRrmTupleTransmitPowerLevelMax
object.

Object is deprecated since co…
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.7
clrRrmTupleTransmitPowerLevelMaxdeprecated
This object represents the maximum value configured
for transmit power level. This value must be greater than
the value for clrRrmTupleTransmitPowerLevelMin object.

Object is deprecated since controller …
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.8
clrRrmTupleTransmitPowerLeveldeprecated
This object represents the current value for transmit
power level. This value is sent to the APs that join the
controller. The APs in turn propogate this value to the
802.11 clients. The client will either use this va…
dbmClrRrmTupleTuningRanger/w
Type Constraints:
range: -127..127
 .1.3.6.1.4.1.9.9.615.1.1.2.1.9
clrRrmTupleSetDefaultdeprecated
This object restores the other objects in this
table to default value. Setting this value to
'true' wil restore defaults as indicated by
the DEFVAL clause. This object can only be set
to 'true' and all other values ar…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.2.1.10

clrRrmChannelTable

table
.1.3.6.1.4.1.9.9.615.1.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmChannelTable' 
This table represents the channel information
for an AP's 802.11 interface. 
Based on the country that an AP operates in, it 
gets assigned to a regulatory domain. For a given
regulatory domain a fixed number of channels are
assigned automatically to an AP for a given interface.
This table represents this information.
Entries are automatically created on the controller
as APs associate. Entries are removed when the APs
disassociate.
clrRrmChannelEntry row .1.3.6.1.4.1.9.9.615.1.1.4.1
Each entry in this table provides the channel
information for an 802.11 interface in an AP.
Indexes
Column Syntax OID
clrRrmChannelNum
The channel nubmer for this entry. This value
represents the unique channel number on this
802.11 interface for this regulatory domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.615.1.1.4.1.1
clrRrmChannelDcaState
This object indicates whether this channel is part
of the dynamic channel allocation (DCA) list.
A value of 'true' indicates that the DCA for
this channel is enabled. A value of 'false' indicates
that the DCA for thi…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.4.1.2
clrRrmChannelRowStatus
The status of this conceptual row.clrRrmChannelNum and
clrRrmChannelDcaState are mandatory for create and go
of rowstatus.All writable objects in this row may be
modified at any time.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.615.1.1.4.1.3

clrRrmDot11BandGrpTable

table
.1.3.6.1.4.1.9.9.615.1.1.5 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmDot11BandGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmDot11BandGrpTable' 
This table contains the information about the
RRM grouping corresponding to the dot11 band 
of the APs that have joined the controller.
          
This table has a one-to-one dependent relationship 
on the clrRrmParametersTable.
clrRrmDot11BandGrpEntry row .1.3.6.1.4.1.9.9.615.1.1.5.1
An entry in this table represents the
RRM RF grouping on a dot11 band
of an AP that has joined the controller.

For each dot11 band an entry will be created.
Indexes
Column Syntax OID
clrRrmDot11BandGrpLeaderIpAddressType
This object represents the group
leader's address type for the dot11 group
containing this controller. The only
one address type supported is ipv4(1).
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.615.1.1.5.1.1
clrRrmDot11BandGrpLeaderIpAddress
This object represents the configured
group leader's address for the dot11
group containing this controller.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.5.1.2
clrRrmDot11BandGrpLeaderName
This object represents the name of the current
group leader.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.615.1.1.5.1.3
clrRrmDot11BandGrpMode
This object specifies the mode for the RRM algorithm
for the band.
'automatic' - the controller form groups and elect leaders
to perform better dynamic parameter optimization.

'leader' - th…
Enumerationr/w
Enumerated Values:
1automatic
2off
3leader
 .1.3.6.1.4.1.9.9.615.1.1.5.1.4
clrRrmDot11BandGrpRole
This object represents the group role with respect to RRM
RF grouping. The controller can be either group member or
group leader while being in automatic or static grouping,
for a particular band. If grouping is off , …
Enumeration
Enumerated Values:
1none
2auto-leader
3auto-member
4static-leader
5static-member
 .1.3.6.1.4.1.9.9.615.1.1.5.1.5
clrRrmDot11BandGrpRestart
This object specifies whether the grouping algorithm needs
a restart. If a value of 'true' is set, the RRM
grouping algorithm is restarted for the dot11 band.
This will always return 'false' when retrieved
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.5.1.6
clrRrmDot11BandGrpLastUpdateTime
This object represents the last time the dot11
grouping was updated on this controller.
This is valid only if the controller is not a
static member in the group. If it is a static member
(i.e the value of the variable ,…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.615.1.1.5.1.7
clrRrmDot11BandGrpInterval
This object represents the period used by the
grouping algorithm. The grouping algorithm runs
when the group contents changes and automatic
grouping is enabled. The system administrator can
start grouping on demand.
secondsUnsigned32
Constraints:
range: 0-600
 .1.3.6.1.4.1.9.9.615.1.1.5.1.8
clrRrmDot11BandGrpLeaderIpv6AddressType
This object represents the IP address type of
the RRM RF group leader.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.615.1.1.5.1.9
clrRrmDot11BandGrpLeaderIpv6Address
This object represents the IPv6 address of the
RRM RF group leader.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.5.1.10

clrRrmDot11BandGrpMemberTable

table
.1.3.6.1.4.1.9.9.615.1.1.6 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmDot11BandGrpMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmDot11BandGrpMemberTable' 
This table contains the information about the
RRM grouping members corresponding to
the dot11 band of the APs that have joined
the controller. 
          
The entries are members of the group represented by
clrRrmDot11BandGrpTable.
clrRrmDot11BandGrpMemberEntry row .1.3.6.1.4.1.9.9.615.1.1.6.1
An entry describes the grouping members
on a dot11 band of an AP that has joined
the controller.

An entry will be created/deleted when
members are added/deleted to/from the gorup.
Indexes
Column Syntax OID
clrRrmDot11BandMemberIpAddressType
This object indicates the address type of the dot11
group member for the dot11 grouping containing this controller.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.615.1.1.6.1.1
clrRrmDot11BandMemberIpAddress
This object specifies the address of the dot11
group member for the dot11 grouping containing this controller.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.6.1.2
clrRrmDot11BandMemberName
This object specifies the name of the dot11
group member for the dot11 grouping containing this controller.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.6.1.3
clrRrmDot11BandMemberIsJoined
This object represents whether the member has joined this
RRM RF Group yet.If not the value would be 'false'.
Else it would be true.This field is significant only
if the current group is a static RRM RF Group.
In all ot…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.6.1.4
clrRrmDot11BandMemberJoinFailureReason
This object represents the reason the member could not
join the RRM RF Group. This field is relevant only
if the corresponding instance for 'clrRrmDot11BandMemberIsJoined'
is 'false'.

joinedSuccessfully …
Enumeration
Enumerated Values:
1joinedSuccessfully
2invalidIp
3groupSizeExceeded
4invalidGroupOrder
5nonMatchingGroupID
6unexpectedError
7weakSignalStrength
8joinPending
9notAManager
10groupingDelayed
11groupingDisabled
12invalidProtocolVersion
13countryCodeMismatch
14invalidHierarchy
15alreadyAStaticLeader
16memberOfAnotherGroup
17unconfiguredAsStaticMember
18cntlrNameAndIpMismatch
19unexpectedMemoryError
20rfDomainMismatch
21splitForInvalidStateRequest
22transitioningToStaticFromAuto
23splitDueToUserAction
 .1.3.6.1.4.1.9.9.615.1.1.6.1.5
clrRrmDot11BandMemberRowStatus
This object specifies the status of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.615.1.1.6.1.6

clrRrmDcaChannelListTable

table
.1.3.6.1.4.1.9.9.615.1.1.9 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmDcaChannelListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmDcaChannelListTable' 
This table contains current channel information
for an AP's 802.11 interface.
Based on the country that an AP operates in, it
gets assigned to a regulatory domain. For a given
regulatory domain a fixed number of channels are
assigned automatically to an AP for a given interface.
This table represents this information.
Entries are automatically created on the controller
as APs associate. Entries are removed when the APs
disassociate.
          
User can add a channel in DCA or remove it from DCA using the
clrRrmChannelTable. clrRrmDcaChannelListTable provides the list
of current channels allocation for DCA.
clrRrmDcaChannelListEntry row .1.3.6.1.4.1.9.9.615.1.1.9.1
Each entry in this table provides list of the channels
that are used in DCA as well as not-used in DCA for an
802.11 interface in an AP.
Indexes
Column Syntax OID
clrRrmDcaUsedChannelList
This object represents the channels that are part
of the Dynamic Channel Allocation (DCA) list.
This is a comma separated list of used channel numbers.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.9.1.1
clrRrmDcaUnusedChannelList
This object represents the channels that are not part
of the Dynamic Channel Allocation (DCA) list. This is
a comma separated list of unused channel numbers.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.9.1.2
clrRrmDcaDefaultChannelList
This object provides the default DCA channels based on
configured country code/country code list. This is
a comma separated list of default DCA channel numbers.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.9.1.3

clrRrmRemoveChannelTable

table
.1.3.6.1.4.1.9.9.615.1.1.13 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmRemoveChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmRemoveChannelTable' 
This table represents the removed channel information
from default DCA channel list for an AP's 802.11 interface. 
Based on the country that an AP operates in, it 
gets assigned to a regulatory domain. For a given
regulatory domain a fixed number of channels are
assigned automatically to an AP for a given interface.
We can remove a channel from this default DCA list and
those channels will be put in this table.
This table represents the removed channels information
from the default DCA channel list.
          
By default, there will not be any entries in this table.
An entry can also be created or deleted from this table
by using clrRrmChannelRowStatus.
clrRrmRemoveChannelEntry row .1.3.6.1.4.1.9.9.615.1.1.13.1
Each entry in this table provides the removed channel
information for an 802.11 interface from
the default DCA channel list.
Indexes
Column Syntax OID
clrRrmRemoveChannelNum
The channel nubmer for this entry. This value represents
the unique channel number removed from the default DCA channel
list for the 802.11 interface for this regulatory domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.615.1.1.13.1.1
clrRrmRemovedChannelDcaState
This object specifies whether this channel is part
of the dynamic channel allocation (DCA) Remove List.
A value of 'false' indicates that the DCA for this
channel is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.13.1.2
clrRrmRemoveChannelRowStatus
The status of this conceptual row.
All writable objects in this row may be modified
at any time.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.615.1.1.13.1.3

clrRrmAddChannelTable

table
.1.3.6.1.4.1.9.9.615.1.1.14 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmAddChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmAddChannelTable' 
This table represents the added channel information
to the default DCA channel list for an AP's 802.11 interface. 
Based on the country that an AP operates in, it 
gets assigned to a regulatory domain. For a given
regulatory domain a fixed number of channels are
assigned automatically to an AP for a given interface.
We can add a non-default DCA channel to this list and those 
channels will be put in this table.
This table represents the added DCA channels information
to the default DCA list.
          
By default, there will not be any entries in this table.
An entry can also be created or deleted by
using clrRrmChannelRowStatus.
clrRrmAddChannelEntry row .1.3.6.1.4.1.9.9.615.1.1.14.1
Each entry in this table provides the added channel
information to the default DCA channel list for an
802.11 interface in an AP.
Indexes
Column Syntax OID
clrRrmAddChannelNum
The channel nubmer for this entry. This value
represents the unique channel number added to the
default DCA channel list on this 802.11 interface
for this regulatory domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.615.1.1.14.1.1
clrRrmAddedChannelDcaState
This object specifies whether this channel is part
of the dynamic channel allocation (DCA) Add List.
A value of 'true' indicates that the DCA for this
channel is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.14.1.2
clrRrmAddChannelRowStatus
The status of this conceptual row.
All writable objects in this row may be modified
at any time.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.615.1.1.14.1.3

clrRrmDot11BandJoinedGrpMemberTable

table
.1.3.6.1.4.1.9.9.615.1.1.15 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmDot11BandJoinedGrpMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmDot11BandJoinedGrpMemberTable' 
This table contains the information about the
RRM grouping members corresponding to
the dot11 band of the APs that have joined
the controller.
          
The entries are members of the group represented by
clrRrmDot11BandGrpTable.
clrRrmDot11BandJoinedGrpMemberEntry row .1.3.6.1.4.1.9.9.615.1.1.15.1
An entry describes the grouping members
on a dot11 band of an AP that has joined
the controller.

An entry will be created/deleted when
members are added/deleted to/from the gorup.
Indexes
Column Syntax OID
clrRrmDot11BandJoinedMemberIpAddressType
This object indicates the address type of the dot11
group member for the dot11 grouping containing
this controller.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.615.1.1.15.1.1
clrRrmDot11BandJoinedMemberIpAddress
This object represents the address of the dot11
group member for the dot11 grouping containing
this controller.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.15.1.2
clrRrmDot11BandJoinedMemberName
This object specifies the name of the dot11
group member for the dot11 grouping containing
this controller.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.15.1.3
clrRrmDot11BandJoinedMemberIsJoined
This object indicates whether the member has joined this
RRM RF Group yet. If not the value would be 'false'.
Else it would be true. This field is significant only
if the current group is a static RRM RF Group.
In all o…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.615.1.1.15.1.4
clrRrmDot11BandJoinedMemberJoinFailureReason
This object indicates the reason the member could not
join the RRM RF Group. This field is relevant only
if the corresponding instance for
'clrRrmDot11BandMemberIsJoined' is 'false'.

joinedSuccessfully …
Enumeration
Enumerated Values:
1joinedSuccessfully
2invalidIp
3groupSizeExceeded
4invalidGroupOrder
5nonMatchingGroupID
6unexpectedError
7weakSignalStrength
8joinPending
9notAManager
10groupingDelayed
11groupingDisabled
12invalidProtocolVersion
13countryCodeMismatch
14invalidHierarchy
15alreadyAStaticLeader
16memberOfAnotherGroup
17unconfiguredAsStaticMember
18cntlrNameAndIpMismatch
19unexpectedMemoryError
20rfDomainMismatch
 .1.3.6.1.4.1.9.9.615.1.1.15.1.5
clrRrmDot11BandJoinedMemberIpv6AddressType
This object indicates the IP address type of the
member controller joined to the RRM RF group.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.615.1.1.15.1.6
clrRrmDot11BandJoinedMemberIpv6Address
This object indicates the IPv6 address of the
member controller joined to the RRM RF group.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.615.1.1.15.1.7

clrRrmBcoTable

table
.1.3.6.1.4.1.9.9.615.1.1.16 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clrRrmBcoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-RRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-RRM-MIB::clrRrmBcoTable' 
This table contains configurations for the
BSS Color Optimization (BCO) algorithm.
clrRrmBcoEntry row .1.3.6.1.4.1.9.9.615.1.1.16.1
An entry in this table represents the
BSS Color Optimization (BCO) configuration
for a dot11 band.
Indexes
Column Syntax OID
clRrmBcoMode
BSS Color Optimization (BCO) has two modes. When the mode is
auto, the BSS color will be dynamically updated for all access
points that permit this operation. When BCO is static, no
dynamic BSS color selections occur an…
Enumerationr/w
Enumerated Values:
1automatic
2static
 .1.3.6.1.4.1.9.9.615.1.1.16.1.1