CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB Table View

This table represents the calibration for the
802.11 wireless clients that would associate
to the APs that have joined this controller.
          
An entry is created through an explicit management
action initiated by the administrator through a
network management station by specifying the
calibration parameters for a particular client
identified by cLD11ClientCalibMacAddress and setting
the RowStatus object to 'createAndGo'.  An existing
entry is deleted by setting the RowStatus object to 
'destroy'.  The object cLD11ClientCalibTableMaxEntries
represents the maximum number of entries in this
table.

cLD11ClientCalibEntry row .1.3.6.1.4.1.9.9.522.1.1.1.1

Each entry represents a conceptual row in this
table and provides the information about the
calibration parameters for wireless clients.

Indexes

cLD11ClientCalibMacAddress

Column	Syntax	OID
cLD11ClientCalibMacAddress This object specifies the MAC address of the 802.11 wireless client for which the calibration parameters in this entry are applicable and uniquely identifies this entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.522.1.1.1.1.1
cLD11ClientCalibBeaconIntervaldeprecated This object specifies the time interval, expressed here in hundredths of a second at which an AP issues radio measurement request messages to a client for every SSID. It is not recommended to configure values less than…	hundredths-secondsInteger32r/w Constraints: range: 400-3240000	.1.3.6.1.4.1.9.9.522.1.1.1.1.2
cLD11ClientCalibRowStatus The object that represents the status of a specific instance of a row in this table. Initially set to a value of 'createAndGo' by the User when a row is created, the status as represented by this object is automatically…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.522.1.1.1.1.3
cLD11ClientCalibNumberOfRadios This object specifies the number of radios used in this calibration.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.522.1.1.1.1.4
cLD11ClientCalibNumberOfSamples This object specifies the number of RSSI samples for a given radio, used in this calibration.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.522.1.1.1.1.5
cLD11ClientCalibSamplesCollected This object indicates the number of samples available for this client.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.522.1.1.1.1.6
cLD11ClientCalibBeaconIntervalExt This object specifies the time interval, expressed here in hundredths of a second at which an AP issues radio measurement request messages to a client for every SSID. It is not recommended to configure values less than…	hundredths-secondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.9.9.522.1.1.1.1.7
cLD11ClientCalibStorageType This object specifies the storage type of this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.522.1.1.1.1.8

This table contains the RSSI data samples
collected for 802.11 client based on the 
information provided in the cldccLD11ClientCalibTable.
Entries are automatically added by the controller
as and when samples are available.
This data is used by the NMS for location
calibration of the 8022.11 clients.

cLD11ClientCalibDataEntry row .1.3.6.1.4.1.9.9.522.1.2.1.1.1

Each entry represents a conceptual row in this
table and provides the information about the
samples for location calibration of a 802.11
client.

Indexes

cLD11ClientCalibMacAddress CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId clD11ClientCalibDataTimeStamp clD11ClientCalibDataAntennaIndex

Column	Syntax	OID
clD11ClientCalibDataTimeStamp This object indicates the time this sample was collected. This is the absolute system time that this sample was collected.	millisecondsSNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.522.1.2.1.1.1.1
clD11ClientCalibDataAntennaIndex This object indicates the antenna which received the probe request from client.	Enumeration Enumerated Values: 1 antenna1 2 antenna2	.1.3.6.1.4.1.9.9.522.1.2.1.1.1.2
clD11ClientCalibDataRssiValue This object indicates the RSSI value for this sample.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.522.1.2.1.1.1.3
clD11ClientCalibDataTransmitPower This object indicates the transmit power level for a calibrating client.	dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.522.1.2.1.1.1.4