CISCO-LWAPP-ACL-MIB Table View

This table represents the CPU ACL related parameters 
of the controller.

claCpuAclEntry row .1.3.6.1.4.1.9.9.577.1.1.1.1

Each entry represents a conceptual row in this table.
For each CPU ACL of the controller, there will be a
row.

Indexes

claCpuAclIndex

Column	Syntax	OID
claCpuAclIndex This object represents unique instance of a CPU ACL on the controller.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.577.1.1.1.1.1
claCpuAclName This object specifies name of the ACL applied to the CPU. The access list to be applied should already exist on the controller. If it is required to remove the ACL for the CPU, this field should be set to an empty st…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.577.1.1.1.1.2
claCpuAclPacketApplicability This object specifies whether CPU ACL applied for only wired packets, wireless packets or both. From release 7.0 onwards, wired and wireless is not supported. A value of none(1) indicates that, no ACL applied to CPU…	Enumerationr/w Enumerated Values: 1 none 2 wired 3 wireless 4 both	.1.3.6.1.4.1.9.9.577.1.1.1.1.3

The table represents the ACLs (Access Control Lists)
and counter status on the Switch.

claAclEntry row .1.3.6.1.4.1.9.9.577.1.2.1.1

Each entry represents a conceptual row in this table.
For each ACL on the controller, there will be a row.

Indexes

claAclName

Column	Syntax	OID
claAclName This object represents name of the Access Control List.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.577.1.2.1.1.1
claAclCounterClear This object specifies the counter clear value of a unique ACL name. A value of 'true' indicates that, ACL counter will be cleared. A value of 'false' indicates that, ACL counter will not be cleared.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.577.1.2.1.1.2

This table represents the rules and number of hits under 
ACL on the switch.

claAclRuleEntry row .1.3.6.1.4.1.9.9.577.1.2.2.1

Each entry represents a conceptual row in this table.
For each ACL rule of the controller, there will be a
row.

Indexes

claAclName claAclRuleIndex

Column	Syntax	OID
claAclRuleIndex This object represents index of the ACL rule. This can be updated to reset the sequence of the rules of an ACL.	Unsigned32 Constraints: range: 1-64	.1.3.6.1.4.1.9.9.577.1.2.2.1.2
claAclRuleHits This object indicates number of hits in the particular rule under the ACL. This object is cleared by setting the claAclCounterClear object.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.577.1.2.2.1.3

This table represents the URL ACLs (Access Control 
Lists).

claAclUrlEntry row .1.3.6.1.4.1.9.9.577.1.2.3.1

Each entry represents a conceptual row in this table.
For each ACL rule of the controller, there will be
a row.

Indexes

claAclName claAclUrlIndex

Column	Syntax	OID
claAclUrlIndex This object represents index of the ACL URL. This can be updated to reset the sequence of the URL entries of an ACL.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.9.9.577.1.2.3.1.1
claAclUrlName This object specifies URL used for ACL. This is used by ACL to permit or deny	CISCO-TCCiscoURLStringr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.9.9.577.1.2.3.1.2
claAclUrlRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.577.1.2.3.1.3

This table represents URL ACLs
on the switch.

claUrlAclEntry row .1.3.6.1.4.1.9.9.577.1.2.4.1

Each entry represents the attributes for cLlaUrlAclTable.
An entry gets added to the table on creating a Url ACL.
Only 64 Url-Acls can be configured

Indexes

claUrlAclName

Column	Syntax	OID
claUrlAclName This object specifies name of the URL Access Control List.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.577.1.2.4.1.1
claUrlAclApplyMode This object specifies the apply mode of the URL ACL on the switch. A value of notapplied(1) indicates that, URL ACL not applied. A value of applied(2) indicates that, URL ACL has been applied on the switch.	Enumerationr/w Enumerated Values: 1 notapplied 2 applied	.1.3.6.1.4.1.9.9.577.1.2.4.1.2
claUrlAclCounterClear This object specifies the URL ACL counter clear value. A value of 'true' indicates that, URL ACL counters will be cleared. A value of 'false' indicates that, URL ACL counters will not be cleared.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.577.1.2.4.1.3
claUrlAclRowStatus This object specifies status column for this row and used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.577.1.2.4.1.4
claUrlAclListType This object specifies the URL ACL list type. A value of whitelist(1) indicates that, all the url configured in acl will only be permitted. A value of blacklist(2) indicates that, only rules specified in the acl will…	Enumerationr/w Enumerated Values: 1 whitelist 2 blacklist	.1.3.6.1.4.1.9.9.577.1.2.4.1.5

This table represents URL ACL Rules.

claUrlAclRuleEntry row .1.3.6.1.4.1.9.9.577.1.2.5.1

Each entry represents the attributes for
claUrlAclRuleTable. An entry gets added to
the table on creating a rule on URL ACL.In a
given ACL there can only be 100 rules

Indexes

claUrlAclName claUrlAclRuleIndex

Column	Syntax	OID
claUrlAclRuleIndex This object represents the unique index of the URL ACL rule. This can be updated to reset the sequence of the rules of an URL ACL.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.577.1.2.5.1.1
claUrlAclRuleUrl This object specifies the URL of a rule.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.577.1.2.5.1.2
claUrlAclRuleAction This object specifies the permission mode of a rule. A value of deny(0) indicates that, URL is to be denied. A value of permit(1) indicates that, URL is to be permitted.	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.9.9.577.1.2.5.1.3
claUrlAclRuleHits This object indicates number of hits in the particular rule under the URL ACL.This object is cleared by setting the claUrlAclCounterClear object.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.577.1.2.5.1.4
claUrlAclRuleRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.577.1.2.5.1.5