CISCO-IPSLA-VIDEO-PROFILE-MIB

        IP SLA is a capability which utilizes active monitoring for
network performance.  It can be used for network 
troubleshooting, network assessment and health
monitoring.
        
This MIB defines the following table as the collection of IP
SLA video traffic profiles that are used when generating
synthetic video traffic by configured IP SLA video operations.
        
  cipslaVideoProfileTable
        
To run an IP SLA Video Operation, the MIB user should do the
following configurations:
        
1. Create a new or reuse the existing rttMonEchoAdminEntry with
valid rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress,
rttMonEchoAdminTargetPort, rttMonEchoAdminSourceAddress,
rttMonEchoAdminSourcePort, rttMonEchoAdminVideoTrafficProfile,
rttMonEchoAdminDscp, rttMonEchoAdminReserveDsp,
rttMonEchoAdminInputInterface, and other applicable objects (if
any) in rttMonEchoAdminTable of CISCO-RTTMON-MIB.
        
2. Schedule the operation to run immediately or at some
scheduled time(s) with optional recurrence(s) if desirable, by
configuring with rttMonCtrlAdminTable of CISCO-RTTMON-MIB.
        
3. Each occurrance of the scheduled operation generates a report
for the IP SLA VO statistics which are populated and available
in cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable of
CISCO-IPSLA-VIDEO-MIB.
        
Glossary:
  IP SLA - Cisco IOS IP Service Level Agreements
  IP SLA operation - Refers to the 'video'
                     operation supported by IP SLA.  
  RTT - Round Trip Time
    
Source file
CISCO-IPSLA-VIDEO-PROFILE-MIB
Last revised
Identity
ciscoIpslaVideoProfileMIB
Base OID
1.3.6.1.4.1.9.9.766
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-VIDEO-SESSION-MIB CvcVideoProfile
CISCO-VIDEO-TC CvcVideoResolution
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IPSLA-VIDEO-PROFILE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IPSLA-VIDEO-PROFILE-MIB::ciscoIpslaVideoProfileMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IPSLA-VIDEO-PROFILE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IPSLA-VIDEO-PROFILE-MIB::ciscoIpslaVideoProfileMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (27)
.1.3.6.1.4.1.9.9.766
.1.3.6.1.4.1.9.9.766.0
.1.3.6.1.4.1.9.9.766.1
.1.3.6.1.4.1.9.9.766.1.1
.1.3.6.1.4.1.9.9.766.1.1.1
.1.3.6.1.4.1.9.9.766.1.1.1.1
Unsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.1
.1.3.6.1.4.1.9.9.766.1.1.1.1.10
kbpsUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.11
kbpsUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.12
kbpsUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.13
msUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.14
kBUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.15
msUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.16
byteUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.17
Enumeration
.1.3.6.1.4.1.9.9.766.1.1.1.1.18
.1.3.6.1.4.1.9.9.766.1.1.1.1.2
.1.3.6.1.4.1.9.9.766.1.1.1.1.3
.1.3.6.1.4.1.9.9.766.1.1.1.1.4
.1.3.6.1.4.1.9.9.766.1.1.1.1.5
Enumeration
.1.3.6.1.4.1.9.9.766.1.1.1.1.6
.1.3.6.1.4.1.9.9.766.1.1.1.1.7
Enumeration
.1.3.6.1.4.1.9.9.766.1.1.1.1.8
fpksUnsigned32
.1.3.6.1.4.1.9.9.766.1.1.1.1.9
.1.3.6.1.4.1.9.9.766.2
.1.3.6.1.4.1.9.9.766.2.1
.1.3.6.1.4.1.9.9.766.2.2
Dependencies (16) 7 direct · 9 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.766.2.1.1
This is the module-compliance for ISR G2 with PVDM3 platforms,
containing object groups and notification groups.
Required groups