Standard view Table view

CISCO-IF-LINK-CONFIG-MIB

        The MIB module for configuration of bulk distribution
(de-multiplexing of traffic from higher-bandwidth to 
lower-bandwidth interfaces).
        
Terminology :
        
bulk-distribution        : The bulk distribution is the 
                           feature by which a line/interface
                           on one module can replace the line
                           for the other.
        
bulk-distribution module : The module which links its 
                           interfaces to the target module.
        
target module            : A module that gets incoming traffic
                           from a bulk distribution module 
                           rather than from a back card.
                     
The Module which supports bulk distribution, converts 
traffic from its lines (may be T3, OC-N) to lines on 
the target module (may be
T3, T1 etc). The bulk distribution is achieved by having a 
point-to-point connection (bulk-distribution bus) between the 
bulk-distribution module and the target module. The benefit 
of bulk distribution is that the target module need not have
the back cards. The lines/interfaces from bulk-distribution
module will be used as lines for the target module.
        
An example is given here on linking interfaces.
        
        
   |------------------------------------------------|
   |                                                |
   |             |------------------------------|   |
   |             |           |             |    |   |
   |             |           |-------------|    |   |
 Ta|rget Module  |           |             |    |   |
-------       -------     -------     ---------------
|     |       |     |     |     |     |              |
|     |       |     |     |     |     |              |
|  T1 |       | T1  |     |T1   |     | Bulk         |
|card |       |card |     |card |     | Distribution |
|     |       |     |     |     |     |              |
|     |       |     |     |     |     | Module       |
|     |       |     |     |     |     |              |
|     |       |     |     |     |     | (T3 card)    |
|     |       |     |     |     |     |              |
-------       -------     -------      ---------------

Source file: CISCO-IF-LINK-CONFIG-MIB
Last revised: 5 Oct 2001, 00:00 UTC
Identity: ciscoIfLinkConfigMIB
Base OID: 1.3.6.1.4.1.9.9.175

Imported Objects

CISCO-SMI	ciscoMgmt
CISCO-TC	CiscoLocationSpecifier
IF-MIB	InterfaceIndex
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	RowStatus

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IF-LINK-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IF-LINK-CONFIG-MIB::ciscoIfLinkConfigMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IF-LINK-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IF-LINK-CONFIG-MIB::ciscoIfLinkConfigMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (12)

ciscoIfLinkConfigMIB		`.1.3.6.1.4.1.9.9.175`
cilConfigMIBObjects		`.1.3.6.1.4.1.9.9.175.1`
cilConfig		`.1.3.6.1.4.1.9.9.175.1.1`
cilConfTable		`.1.3.6.1.4.1.9.9.175.1.1.1`
cilConfEntry	cilSourceInterface	`.1.3.6.1.4.1.9.9.175.1.1.1.1`
cilSourceInterface	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.175.1.1.1.1.1`
cilTargetModuleInterface r/w	CISCO-TCCiscoLocationSpecifier	`.1.3.6.1.4.1.9.9.175.1.1.1.1.2`
cilRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.175.1.1.1.1.3`
cilTargetModuleFramingType r/w	Enumeration	`.1.3.6.1.4.1.9.9.175.1.1.1.1.4`
cilConfigMIBConformance		`.1.3.6.1.4.1.9.9.175.3`
cilConfigMIBCompliances		`.1.3.6.1.4.1.9.9.175.3.1`
cilConfigMIBGroups		`.1.3.6.1.4.1.9.9.175.3.2`

Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-IF-LINK-CONFIG-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- CISCO-TCcisco1 symbol
  - CISCO-SMIciscoshared1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared5 symbols
  - SNMPv2-TCrfcdefault fallback1 symbol
    - SNMPv2-SMIrfcshared1 symbol
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared2 symbols
- SNMPv2-TCrfcdefault fallbackshared1 symbol

Dependency-first compile order

Conformance Groups (2)

cilConfMIBGroup deprecated	cilTargetModuleInterface cilRowStatus These are objects related to interface link configuration group. This group has been replaced by cilConfMIBGroupRev1.	`.1.3.6.1.4.1.9.9.175.3.2.1`
cilConfMIBGroupRev1	cilTargetModuleInterface cilRowStatus cilTargetModuleFramingType These are objects related to interface link configuration group. This group replaces the cilConfMIBGroup.	`.1.3.6.1.4.1.9.9.175.3.2.2`

Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.175.3.1.1

The Compliance statement for interface link configuration group.
This has been replaced by the cilConfigMIBComplianceRev1 statement.

Required groups

mandatory	cilConfMIBGroup

OID .1.3.6.1.4.1.9.9.175.3.1.2

The Compliance statement for interface link configuration group.
This statement replaces cilConfigMIBCompliance statement.