CISCO-IETF-PW-MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cpwVcMplsTable

table

.1.3.6.1.4.1.9.10.107.1.1 · 1 row entry · 8 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cpwVcMplsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-MPLS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-MPLS-MIB::cpwVcMplsTable'

This table specifies information for VC to be carried over  
MPLS PSN.

cpwVcMplsEntry row .1.3.6.1.4.1.9.10.107.1.1.1

A row in this table represents parameters specific to MPLS
PSN for a pseudo wire connection (VC). The row is created
automatically by the local agent if the cpwVcPsnType is
MPLS. It is indexed by cpwVcIndex, which…

Indexes

CISCO-IETF-PW-MIBcpwVcIndex

Column Syntax OID

cpwVcMplsMplsType

Set by the operator to indicate the outer tunnel types, if
exists. mplsTe is used if the outer tunnel was set-up by
MPLS-TE, and mplsNonTe is used the outer tunnel was set up
by LDP or manually. Combination of mplsT…

Bitsr/w

Enumerated Values:

0	mplsTe
1	mplsNonTe
2	vcOnly

.1.3.6.1.4.1.9.10.107.1.1.1.1

cpwVcMplsExpBitsMode

Set by the operator to indicate the way the VC shim label
EXP bits are to be determined. The value of outerTunnel(1)
is used where there is an outer tunnel - cpwVcMplsMplsType
is mplsTe or mplsNonTe. Note that in th…

Enumerationr/w

Enumerated Values:

1	outerTunnel
2	specifiedValue
3	serviceDependant

.1.3.6.1.4.1.9.10.107.1.1.1.2

cpwVcMplsExpBits

Set by the operator to indicate the MPLS EXP bits to be
used on the VC shim label if cpwVcMplsExpBitsMode is
specifiedValue(2), zero otherwise.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.9.10.107.1.1.1.3

cpwVcMplsTtl

Set by the operator to indicate the VC TTL bits to be used
on the VC shim label.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.10.107.1.1.1.4

cpwVcMplsLocalLdpID

The local LDP identifier of the LDP entity creating
this VC in the local node. As the VC labels are always
set from the per platform label space, the last two octets
in the LDP ID MUST be always both zeros.

MPLS-TC-STD-MIBMplsLdpIdentifierr/w

Type Constraints:
range: 6

.1.3.6.1.4.1.9.10.107.1.1.1.5

cpwVcMplsLocalLdpEntityID

The local LDP Entity index of the LDP entity to be used
for this VC on the local node. Should be set to all zeros
if not used.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.10.107.1.1.1.6

cpwVcMplsPeerLdpID

The peer LDP identifier as identified from the LDP
session. Should be zero if not relevant or not known yet.

MPLS-TC-STD-MIBMplsLdpIdentifier

Type Constraints:
range: 6

.1.3.6.1.4.1.9.10.107.1.1.1.7

cpwVcMplsStorageType

This variable indicates the storage type for this row.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …

.1.3.6.1.4.1.9.10.107.1.1.1.8

cpwVcMplsOutboundTable

table

.1.3.6.1.4.1.9.10.107.1.3 · 1 row entry · 9 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cpwVcMplsOutboundTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-MPLS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-MPLS-MIB::cpwVcMplsOutboundTable'

This table associates VCs using MPLS PSN with the outbound 
MPLS tunnels (i.e. toward the PSN) or the physical  
interface in case of VC only.

cpwVcMplsOutboundEntry row .1.3.6.1.4.1.9.10.107.1.3.1

A row in this table represents a link between PW VC (that
require MPLS tunnels) and MPLS tunnel toward the PSN.
In the case of VC only, it associate the VC with the
interface that shall carry the VC.
This table is …

Indexes

CISCO-IETF-PW-MIBcpwVcIndex cpwVcMplsOutboundIndex

Column Syntax OID

cpwVcMplsOutboundIndex

Arbitrary index for enabling multiple rows per VC in
this table. Next available free index can be retrieved
using cpwVcMplsOutboundIndexNext.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.10.107.1.3.1.1

cpwVcMplsOutboundLsrXcIndex

This object will be set by the operator. If the outer
label is defined in the MPL-LSR-MIB, i.e. set by LDP
or manually, this object points to the XC index
of the outer tunnel. Otherwise, it is set to zero.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.10.107.1.3.1.2

cpwVcMplsOutboundTunnelIndex

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsTunnelIndexr/w

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.10.107.1.3.1.3

cpwVcMplsOutboundTunnelInstance

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.10.107.1.3.1.4

cpwVcMplsOutboundTunnelLclLSR

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsLsrIdentifierr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.9.10.107.1.3.1.5

cpwVcMplsOutboundTunnelPeerLSR

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsLsrIdentifierr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.9.10.107.1.3.1.6

cpwVcMplsOutboundIfIndex

In case of VC only (no outer tunnel), this object holds
the ifIndex of the outbound port, otherwise set to zero.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.9.10.107.1.3.1.7

cpwVcMplsOutboundRowStatus

For creating, modifying, and deleting this row.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.9.10.107.1.3.1.8

cpwVcMplsOutboundStorageType

This variable indicates the storage type for this object.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.9.10.107.1.3.1.9

cpwVcMplsInboundTable

table

.1.3.6.1.4.1.9.10.107.1.5 · 1 row entry · 9 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cpwVcMplsInboundTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-MPLS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-MPLS-MIB::cpwVcMplsInboundTable'

This table associates VCs using MPLS PSN with the inbound 
MPLS tunnels (i.e. for packets coming from the PSN),  
if such association is desired (mainly for security  
reasons).

cpwVcMplsInboundEntry row .1.3.6.1.4.1.9.10.107.1.5.1

A row in this table represents a link between PW VCs (that
require MPLS tunnels) and MPLS tunnel for packets arriving
from the PSN.
This table is indexed by the set of indexes used to
identify the VC - cpwVcIndex an…

Indexes

CISCO-IETF-PW-MIBcpwVcIndex cpwVcMplsInboundIndex

Column Syntax OID

cpwVcMplsInboundIndex

Arbitrary index for enabling multiple rows per VC in
this table. Next available free index can be retrieved
using cpwVcMplsInboundIndexNext.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.10.107.1.5.1.1

cpwVcMplsInboundLsrXcIndex

If the outer label is defined in the MPL-LSR-MIB, i.e. set
by LDP or manually, this object points to the XC index
of the outer tunnel. Otherwise, it is set to zero.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.10.107.1.5.1.2

cpwVcMplsInboundTunnelIndex

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsTunnelIndexr/w

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.10.107.1.5.1.3

cpwVcMplsInboundTunnelInstance

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.10.107.1.5.1.4

cpwVcMplsInboundTunnelLclLSR

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsLsrIdentifierr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.9.10.107.1.5.1.5

cpwVcMplsInboundTunnelPeerLSR

Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero.

MPLS-TC-STD-MIBMplsLsrIdentifierr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.9.10.107.1.5.1.6

cpwVcMplsInboundIfIndex

In case of VC only (no outer tunnel), this object holds the
ifIndex of the inbound port, otherwise set to zero.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.9.10.107.1.5.1.7

cpwVcMplsInboundRowStatus

For creating, modifying, and deleting this row.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.9.10.107.1.5.1.8

cpwVcMplsInboundStorageType

This variable indicates the storage type for this row.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.9.10.107.1.5.1.9

cpwVcMplsNonTeMappingTable

table

.1.3.6.1.4.1.9.10.107.1.6 · 1 row entry · 4 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cpwVcMplsNonTeMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-MPLS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-MPLS-MIB::cpwVcMplsNonTeMappingTable'

This table maps an inbound/outbound Tunnel to a VC in non- 
TE applications.

cpwVcMplsNonTeMappingEntry row .1.3.6.1.4.1.9.10.107.1.6.1

A row in this table represents the association
between the PW VC and it's non TE MPLS outer Tunnel
it's physical interface if there is no outer tunnel
(VC only).

An application can use this table to qu…

Indexes

cpwVcMplsNonTeMappingTunnelDirection cpwVcMplsNonTeMappingXcTunnelIndex cpwVcMplsNonTeMappingIfIndex cpwVcMplsNonTeMappingVcIndex

Column Syntax OID

cpwVcMplsNonTeMappingTunnelDirection

Identifies if the row represent an outbound or inbound
mapping.

Enumeration

Enumerated Values:

1	outbound
2	inbound

.1.3.6.1.4.1.9.10.107.1.6.1.1

cpwVcMplsNonTeMappingXcTunnelIndex

Index for the conceptual XC row identifying Tunnel to VC
mappings when the outer tunnel is created by the MPLS-LSR-
MIB, Zero otherwise.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.10.107.1.6.1.2

cpwVcMplsNonTeMappingIfIndex

Identify the port on which the VC is carried for VC only
case.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.9.10.107.1.6.1.3

cpwVcMplsNonTeMappingVcIndex

The value that represent the VC in the cpwVcTable.

CISCO-IETF-PW-TC-MIBCpwVcIndexType

.1.3.6.1.4.1.9.10.107.1.6.1.4

cpwVcMplsTeMappingTable

table

.1.3.6.1.4.1.9.10.107.1.7 · 1 row entry · 6 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cpwVcMplsTeMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-MPLS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-MPLS-MIB::cpwVcMplsTeMappingTable'

This table maps an inbound/outbound Tunnel to a VC in  
MPLS-TE applications.

cpwVcMplsTeMappingEntry row .1.3.6.1.4.1.9.10.107.1.7.1

A row in this table represents the association
between a PW VC and it's MPLS-TE outer Tunnel.

An application can use this table to quickly retrieve the
PW carried over specific TE MPLS outer tunnel.
…

Indexes

cpwVcMplsTeMappingTunnelDirection cpwVcMplsTeMappingTunnelIndex cpwVcMplsTeMappingTunnelInstance cpwVcMplsTeMappingTunnelPeerLsrID cpwVcMplsTeMappingTunnelLocalLsrID cpwVcMplsTeMappingVcIndex

Column Syntax OID

cpwVcMplsTeMappingTunnelDirection

Identifies if the row represent an outbound or inbound
mapping.

Enumeration

Enumerated Values: