Standard view Table view

CISCO-IETF-MPLS-ID-STD-03-MIB

        Copyright (c) 2012 IETF Trust and the persons identified
as the document authors.  All rights reserved.
        
This MIB module contains generic object definitions for
MPLS Traffic Engineering in transport networks. This module is a
cisco-ized version of the IETF draft:
draft-ietf-mpls-tp-te-mib-03.

Source file: CISCO-IETF-MPLS-ID-STD-03-MIB
Last revised: 7 Jun 2012, 00:00 UTC
Identity: cmplsIdStdMIB
Base OID: 1.3.6.1.4.1.9.10.147

Imported Objects

CISCO-MPLS-TC-EXT-STD-MIB	CMplsGlobalId CMplsIccId CMplsNodeId
CISCO-SMI	ciscoExperiment
MPLS-TC-STD-MIB	mplsStdMIB
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-MPLS-ID-STD-03-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-MPLS-ID-STD-03-MIB::cmplsIdStdMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-MPLS-ID-STD-03-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-MPLS-ID-STD-03-MIB::cmplsIdStdMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (9)

cmplsIdStdMIB		`.1.3.6.1.4.1.9.10.147`
cmplsIdNotifications		`.1.3.6.1.4.1.9.10.147.0`
cmplsIdObjects		`.1.3.6.1.4.1.9.10.147.1`
cmplsGlobalId r/w	CISCO-MPLS-TC-EXT-STD-MIBCMplsGlobalId	`.1.3.6.1.4.1.9.10.147.1.1`
cmplsIcc r/w	CISCO-MPLS-TC-EXT-STD-MIBCMplsIccId	`.1.3.6.1.4.1.9.10.147.1.2`
cmplsNodeId r/w	CISCO-MPLS-TC-EXT-STD-MIBCMplsNodeId	`.1.3.6.1.4.1.9.10.147.1.3`
cmplsIdConformance		`.1.3.6.1.4.1.9.10.147.2`
cmplsIdGroups		`.1.3.6.1.4.1.9.10.147.2.1`
cmplsIdCompliances		`.1.3.6.1.4.1.9.10.147.2.2`

Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-IETF-MPLS-ID-STD-03-MIBciscoselected
- CISCO-MPLS-TC-EXT-STD-MIBcisco3 symbols
  - CISCO-SMIcisco1 symbol
    - SNMPv2-SMIrfcdefault fallback3 symbols
  - MPLS-TC-STD-MIBrfcdefault fallback1 symbol
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared2 symbols
  - SNMPv2-TCrfcdefault fallbackshared1 symbol
- CISCO-SMIciscoshared1 symbol
- MPLS-TC-STD-MIBrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallback3 symbols
  - SNMPv2-SMIrfcshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols

Dependency-first compile order

SNMPv2-SMIrfc
CISCO-SMIcisco
SNMPv2-TCrfc
MPLS-TC-STD-MIBrfc
CISCO-MPLS-TC-EXT-STD-MIBcisco
SNMPv2-CONFrfc
CISCO-IETF-MPLS-ID-STD-03-MIBciscoselected

Conformance Groups (1)

cmplsIdScalarGroup	cmplsGlobalId cmplsNodeId cmplsIcc Scalar object needed to implement MPLS TP path.	`.1.3.6.1.4.1.9.10.147.2.1.1`

Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.147.2.2.1

Compliance statement for agents that provide full
support the MPLS-ID-STD-MIB module.

Required groups

mandatory	cmplsIdScalarGroup

OID .1.3.6.1.4.1.9.10.147.2.2.2