CISCO-IETF-ISIS-MIB Table View

The set of manual area addresses configured on this
Intermediate System.

ciiManAreaAddrEntry row .1.3.6.1.4.1.9.10.118.1.1.2.1

Each entry contains one area address manually configured
on this system

Indexes

ciiManAreaAddr

Column	Syntax	OID
ciiManAreaAddr A manually configured area address for this system. This object follows the index behavior. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0…	CiiOSINSAddress Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.1.2.1.1
ciiManAreaAddrExistState The state of the ciiManAreaAddrEntry. This object follows the Row Status behavior. If the ciiSysAdminState for this Intermediate System is 'on', and an attempt is made to set this object to the value 'destroy' or 'notIn…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.1.2.1.2

The union of the sets of area addresses reported in all
Level 1 LSPs with fragment number zero generated by this
Intermediate System, or received from other Intermediate
Systems which are reachable via Level 1 routing.

ciiAreaAddrEntry row .1.3.6.1.4.1.9.10.118.1.1.3.1

Each entry contains one area address reported in a
Level 1 LSP generated or received by this Intermediate
System.

Indexes

ciiAreaAddr

Column	Syntax	OID
ciiAreaAddr An area address reported in a Level 1 LSP.	CiiOSINSAddress Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.1.3.1.1

This table contains the manually configured set of
protocols supported by this Intermediate System.

ciiSysProtSuppEntry row .1.3.6.1.4.1.9.10.118.1.1.4.1

Each entry contains one protocol supported by
this Intermediate System.

Indexes

ciiSysProtSuppProtocol

Column	Syntax	OID
ciiSysProtSuppProtocol One supported protocol. This object follows the index behavior.	CiiSupportedProtocol Type Values: 129 iso8473 142 ipV6 204 ip	.1.3.6.1.4.1.9.10.118.1.1.4.1.1
ciiSysProtSuppExistState The state of the ciiSysProtSuppEntry. This object follows the RowStatus behavior.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.1.4.1.2

The set of IP summary addresses to use in forming
summary TLVs originated by this Intermediate System.
          
An administrator may use a summary address to combine
and modify IP Reachability announcements.  If the
Intermediate system can reach any subset of the summary
address, the summary address will be announced instead,
at the configured metric.

ciiSummAddrEntry row .1.3.6.1.4.1.9.10.118.1.1.5.1

Each entry contains one IP summary address.

Indexes

ciiSummAddressType ciiSummAddress ciiSummAddrPrefixLen

Column	Syntax	OID
ciiSummAddressType The Type of IP address for this summary address. This object follows the index behavior.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.118.1.1.5.1.1
ciiSummAddress The IP Address value for this summary address. This object follows the index behavior.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.118.1.1.5.1.2
ciiSummAddrPrefixLen The Length of the IP NetMask for this summary address.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.9.10.118.1.1.5.1.3
ciiSummAddrExistState The existence state of this summary address. This object follows the row status behavior.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.1.5.1.4
ciiSummAddrMetric The metric value to announce this summary address with in LSPs generated by this system.	CiiDefaultMetricr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.10.118.1.1.5.1.5
ciiSummAddrFullMetric The wide metric value to announce this summary address with in LSPs generated by this system.	CiiFullMetricr/w	.1.3.6.1.4.1.9.10.118.1.1.5.1.6

This table provides criteria to decide if a route should
be leaked from L2 to L1 when Domain Wide Prefix leaking is
enabled.
          
Addresses that match the summary mask in the table will
be announced at L1 by routers when ciiSysL2toL1Leaking
is enabled.  Routes that fall into the ranges specified
are announced as is, without being summarized.  Routes
that do not match a summary mask are not announced.

ciiRedistributeAddrEntry row .1.3.6.1.4.1.9.10.118.1.1.6.1

Each entry contains one IP summary address to
manage leaking L2 addresses into L1.

Indexes

ciiRedistributeAddrType ciiRedistributeAddrAddress ciiRedistributeAddrPrefixLen

Column	Syntax	OID
ciiRedistributeAddrType The Type of IP address for this summary address. This object follows the index behavior.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.118.1.1.6.1.1
ciiRedistributeAddrAddress The IP Address value for this summary address. This object follows the index behavior.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.118.1.1.6.1.2
ciiRedistributeAddrPrefixLen The Length of the IP NetMask for this summary address.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.9.10.118.1.1.6.1.3
ciiRedistributeAddrExistState The existence state of this summary address. This object follows the row status behavior.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.1.6.1.4

The set of hostnames and router ID.

ciiRouterEntry row .1.3.6.1.4.1.9.10.118.1.1.7.1

Each entry tracks information about one peer at
one level.

Indexes

ciiRouterSysID ciiRouterLevel

Column	Syntax	OID
ciiRouterSysID The System ID of the Router Peer.	CiiSystemID Type Constraints: range: 6	.1.3.6.1.4.1.9.10.118.1.1.7.1.1
ciiRouterLevel The level of this Intermediate System.	CiiISLevel Type Values: 0 none 1 area 2 domain	.1.3.6.1.4.1.9.10.118.1.1.7.1.2
ciiRouterHostName The hostname listed in LSP, or zero-length string if none.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.118.1.1.7.1.3
ciiRouterID The Router ID of the Peer found in LSP, or zero if none.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.1.7.1.4

Level specific information about the System.

ciiSysLevelEntry row .1.3.6.1.4.1.9.10.118.1.2.1.1

Describe variables defined for Area or Domain.

Indexes

ciiSysLevelIndex

Column	Syntax	OID
ciiSysLevelIndex The level that this entry describes.	Enumeration Enumerated Values: 1 level1IS 2 level2IS	.1.3.6.1.4.1.9.10.118.1.2.1.1.1
ciiSysLevelOrigLSPBuffSize The maximum size of LSPs and SNPs originated by this Intermediate System at this level. This object follows the replaceOnlyWhileDisabled behavior.	CiiLSPBuffSizer/w Type Constraints: range: 512..16000	.1.3.6.1.4.1.9.10.118.1.2.1.1.2
ciiSysLevelMinLSPGenInt Minimum interval, in seconds, between successive generation of LSPs with the same LSPID at this level by this Intermediate System. This object follows the resettingTimer behavior.	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.118.1.2.1.1.3
ciiSysLevelOverloadState The state of the database at this level. The value 'off' indicates that IS-IS is not active at this level. The value 'on' indicates that IS-IS is active at this level, and not overloaded. The value 'waiting' indicates a…	CiiLevelState Type Values: 1 off 2 on 3 waiting 4 overloaded	.1.3.6.1.4.1.9.10.118.1.2.1.1.4
ciiSysLevelSetOverload Administratively set the overload bit for the level. The overload bit will continue to be set if the implementation runs out of memory, independent of this variable	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.2.1.1.5
ciiSysLevelSetOverloadUntil If set, the overload bit should be set, and cleared after sysUpTime exceeds this value.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.2.1.1.6
ciiSysLevelMetricStyle Which style of Metric do we generate in our LSPs at this level? This object follows the replaceOnlyWhileDisabled behavior.	CiiMetricStyler/w Type Values: 1 narrow 2 wide 3 both	.1.3.6.1.4.1.9.10.118.1.2.1.1.7
ciiSysLevelSPFConsiders Which style of Metric do we consider in our SPF computation at this level?	CiiMetricStyler/w Type Values: 1 narrow 2 wide 3 both	.1.3.6.1.4.1.9.10.118.1.2.1.1.8
ciiSysLevelTEEnabled Do we do Traffic Engineering at this level?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.2.1.1.9

The table of circuits used by this
Intermediate System.

ciiCircEntry row .1.3.6.1.4.1.9.10.118.1.3.2.1

An ciiCircEntry exists for each circuit used by
Integrated IS-IS on this system.

Indexes

ciiCircIndex

Column	Syntax	OID
ciiCircIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.118.1.3.2.1.1
ciiCircIfIndex The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.10.118.1.3.2.1.2
ciiCircIfSubIndex A specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creation	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.10.118.1.3.2.1.3
ciiCircAdminState The administrative state of the circuit. This object follows the CiiAdminState behavior.	CiiAdminStater/w Type Values: 1 on 2 off	.1.3.6.1.4.1.9.10.118.1.3.2.1.4
ciiCircExistState The existence state of this circuit. This object follows the RowStatus behavior. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol PDUs on this circuit. Setting the state to 'de…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.3.2.1.5
ciiCircType The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of ciiCircIfIndex.	Enumerationr/w Enumerated Values: 1 broadcast 2 ptToPt 3 staticIn 4 staticOut 5 dA	.1.3.6.1.4.1.9.10.118.1.3.2.1.6
ciiCircExtDomain If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.3.2.1.7
ciiCircLevel Indicates which type of packets will be sent and accepted on this circuit. The values used will be modified by the settings of ciiSysType. This object follows the replaceOnlyWhileDisabled behavior.	Enumerationr/w Enumerated Values: 1 level1 2 level2 3 level1L2	.1.3.6.1.4.1.9.10.118.1.3.2.1.8
ciiCircPassiveCircuit Should we include this interface in LSPs, even if it is not running the IS-IS Protocol?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.3.2.1.9
ciiCircMeshGroupEnabled Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh …	Enumerationr/w Enumerated Values: 1 inactive 2 blocked 3 set	.1.3.6.1.4.1.9.10.118.1.3.2.1.10
ciiCircMeshGroup Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If ciiCircMeshGroupEnabled is inactive or b…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.3.2.1.11
ciiCircSmallHellos Can we send unpadded hellos on LAN circuits? 'false' means LAN Hellos must be padded. Implementations should allow the administrator to read this value. An implementation need not be able to support unpadded hellos to…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.3.2.1.12
ciiCircLastUpTime If the circuit is enabled, the value of sysUpTime when ciiCircAdminState most recently entered the state 'on'. If the circuit is not 'on', the value of sysUpTime when the circuit last entered state 'on', 0 if the circu…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.3.2.1.13
ciiCirc3WayEnabled Is this circuit enabled to run 3Way handshake?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.3.2.1.14
ciiCircExtendedCircID The value to be used as the extended circuit ID in 3Way handshake. This value is only used if ciiCirc3WayEnabled is true, and must be unique across all circuits on this IS.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.3.2.1.15

Level specific information about circuits used by IS-IS

ciiCircLevelEntry row .1.3.6.1.4.1.9.10.118.1.4.1.1

An ciiCircLevelEntry exists for each level on
each circuit used by Integrated IS-IS on this system.

Indexes

ciiCircIndex ciiCircLevelIndex

Column	Syntax	OID
ciiCircLevelIndex The level that this entry describes.	Enumeration Enumerated Values: 1 level1IS 2 level2IS	.1.3.6.1.4.1.9.10.118.1.4.1.1.1
ciiCircLevelMetric The metric value of this circuit for this level.	CiiDefaultMetricr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.10.118.1.4.1.1.2
ciiCircLevelWideMetric The wide metric value of this circuit for this level.	CiiWideMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.9.10.118.1.4.1.1.3
ciiCircLevelISPriority The priority for becoming LAN Designated Intermediate System at this level.	CiiISPriorityr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.10.118.1.4.1.1.4
ciiCircLevelIDOctet A one byte identifier that can be used in protocol packets to identify a circuit. Values of ciiCircLevelIDOctet do not need to be unique. They are only required to differ on LANs where the Intermediate System is the D…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.10.118.1.4.1.1.5
ciiCircLevelID On a point to point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initialization. On a point to point circuit without such an adjacency, …	CiiCircuitID Type Constraints: range: 0 range: 7	.1.3.6.1.4.1.9.10.118.1.4.1.1.6
ciiCircLevelDesIS The ID of the LAN Designated Intermediate System on this circuit at this level. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned i…	CiiCircuitID Type Constraints: range: 0 range: 7	.1.3.6.1.4.1.9.10.118.1.4.1.1.7
ciiCircLevelHelloMultiplier This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS	Integer32r/w Constraints: range: 2-100	.1.3.6.1.4.1.9.10.118.1.4.1.1.8
ciiCircLevelHelloTimer Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at this level for LANs. The value at L1 is used as the period between Hellos on L1L2 point to point circuits. Setting this value at level 2 on a…	millisecondsInteger32r/w Constraints: range: 10-600000	.1.3.6.1.4.1.9.10.118.1.4.1.1.9
ciiCircLevelDRHelloTimer Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behavior.	millisecondsInteger32r/w Constraints: range: 10-120000	.1.3.6.1.4.1.9.10.118.1.4.1.1.10
ciiCircLevelLSPThrottle Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at this level.	millisecondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.118.1.4.1.1.11
ciiCircLevelMinLSPRetransInt Minimum interval, in seconds, between re-transmission of an LSP at this level. This object follows the resettingTimer behavior. Note that ciiCircLevelLSPThrottle controls how fast we send back to back LSP…	secondsInteger32r/w Constraints: range: 1-300	.1.3.6.1.4.1.9.10.118.1.4.1.1.12
ciiCircLevelCSNPInterval Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this level. This object follows the resettingTimer…	secondsInteger32r/w Constraints: range: 1-600	.1.3.6.1.4.1.9.10.118.1.4.1.1.13
ciiCircLevelPartSNPInterval Minimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior.	secondsInteger32r/w Constraints: range: 1-120	.1.3.6.1.4.1.9.10.118.1.4.1.1.14

System wide counters for this Intermediate System.

ciiSystemCounterEntry row .1.3.6.1.4.1.9.10.118.1.5.1.1

System-wide IS-IS counters.

Indexes

ciiSysStatLevel

Column	Syntax	OID
ciiSysStatLevel The level that this entry describes.	Enumeration Enumerated Values: 1 level1IS 2 level2IS	.1.3.6.1.4.1.9.10.118.1.5.1.1.1
ciiSysStatCorrLSPs Number of corrupted in-memory LSP frames detected. LSPs received from the wire with a bad checksum are silently dropped and not counted. LSPs received from the wire with parse errors are co…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.2
ciiSysStatAuthTypeFails The number of frames with authentication type mismatches recognized by this Intermediate System.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.3
ciiSysStatAuthFails The number of frames with authentication failures recognized by this Intermediate System.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.4
ciiSysStatLSPDbaseOloads Number of times the LSP database has become overloaded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.5
ciiSysStatManAddrDropFromAreas Number of times a manual address has been dropped from the area.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.6
ciiSysStatAttmptToExMaxSeqNums Number of times the IS has attempted to exceed the maximum sequence number.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.7
ciiSysStatSeqNumSkips Number of times a sequence number skip has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.8
ciiSysStatOwnLSPPurges Number of times a zero-aged copy of the system's own LSP is received from some other node.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.9
ciiSysStatIDFieldLenMismatches Number of times a PDU is received with a different value for ID field length to that of the receiving system.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.10
ciiSysStatPartChanges Partition changes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.11
ciiSysStatSPFRuns Number of times we ran SPF at this level.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.12
ciiSysStatLSPErrors Number of LSP frames with errors we have received.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.1.1.13

Circuit specific counters for this
Intermediate System.

ciiCircuitCounterEntry row .1.3.6.1.4.1.9.10.118.1.5.2.1

An ciiCircuitCounterEntry exists for each circuit
used by Integrated IS-IS on this system.

Indexes

ciiCircIndex ciiCircuitType

Column	Syntax	OID
ciiCircuitType What type of circuit saw these counts? The point to point Hello PDU includes both L1 and L2, and ISs form a single adjacency on point to point links. Thus we combine counts on point to point links into on…	Enumeration Enumerated Values: 1 lanlevel1 2 lanlevel2 3 p2pcircuit	.1.3.6.1.4.1.9.10.118.1.5.2.1.1
ciiCircAdjChanges The number of times an adjacency state change has occurred on this circuit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.2
ciiCircNumAdj The number of adjacencies on this circuit.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.3
ciiCircInitFails The number of times initialization of this circuit has failed. This counts events such as PPP NCP failures. Failures to form an adjacency are counted by ciiCircRejAdjs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.4
ciiCircRejAdjs The number of times an adjacency has been rejected on this circuit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.5
ciiCircIDFieldLenMismatches The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.6
ciiCircMaxAreaAddrMismatches The number of times an IS-IS control PDU with a max area address field different to that for this system has been received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.7
ciiCircAuthTypeFails The number of times an IS-IS control PDU with an auth type field different to that for this system has been received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.8
ciiCircAuthFails The number of times an IS-IS control PDU with the correct auth type has failed to pass authentication validation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.9
ciiCircLANDesISChanges The number of times the Designated IS has changed on this circuit at this level. If the circuit is point to point, this count is zero.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.2.1.10

Information about IS-IS protocol traffic at one level
on one circuit in one direction

ciiPacketCounterEntry row .1.3.6.1.4.1.9.10.118.1.5.3.1

Information about IS-IS protocol traffic at one level
on one circuit in one direction

Indexes

ciiCircIndex ciiPacketCountLevel ciiPacketCountDirection

Column	Syntax	OID
ciiPacketCountLevel The level at which these PDU counts have been collected.	Enumeration Enumerated Values: 1 level1 2 level2	.1.3.6.1.4.1.9.10.118.1.5.3.1.1
ciiPacketCountDirection Were we sending or receiving these PDUs?	Enumeration Enumerated Values: 1 sending 2 receiving	.1.3.6.1.4.1.9.10.118.1.5.3.1.2
ciiPacketCountIIHellos The number of IS-IS Hello PDU frames seen in this direction at this level. Point-to-Point IIH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.3
ciiPacketCountISHellos The number of ES-IS Hello PDU frames seen in this direction. ISH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.4
ciiPacketCountESHellos The number of ES Hello PDU frames seen in this direction. ESH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.5
ciiPacketCountLSPs The number of IS-IS LSP frames seen in this direction at this level.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.6
ciiPacketCountCSNPs The number of IS-IS CSNP frames seen in this direction at this level.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.7
ciiPacketCountPSNPs The number of IS-IS PSNP frames seen in this direction at this level.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.8
ciiPacketCountUnknowns The number of unknown IS-IS PDU frames seen at this level.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.5.3.1.9

The table of adjacencies to Intermediate Systems.

ciiISAdjEntry row .1.3.6.1.4.1.9.10.118.1.6.1.1

Each entry corresponds to one adjacency to an
Intermediate System on this system.

Indexes

ciiCircIndex ciiISAdjIndex

Column	Syntax	OID
ciiISAdjIndex A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created.	Integer32 Constraints: range: 1-2000000000	.1.3.6.1.4.1.9.10.118.1.6.1.1.1
ciiISAdjState The state of the adjacency	Enumeration Enumerated Values: 1 down 2 initializing 3 up 4 failed	.1.3.6.1.4.1.9.10.118.1.6.1.1.2
ciiISAdj3WayState The 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state, and are not intended to match ciiISAdjState.	Enumeration Enumerated Values: 0 up 1 initializing 2 down 3 failed	.1.3.6.1.4.1.9.10.118.1.6.1.1.3
ciiISAdjNeighSNPAAddress The SNPA address of the neighboring system.	CiiOSINSAddress Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.6.1.1.4
ciiISAdjNeighSysType The type of the neighboring system.	Enumeration Enumerated Values: 1 l1IntermediateSystem 2 l2IntermediateSystem 3 l1L2IntermediateSystem 4 unknown	.1.3.6.1.4.1.9.10.118.1.6.1.1.5
ciiISAdjNeighSysID The system ID of the neighboring Intermediate System.	CiiSystemID Type Constraints: range: 6	.1.3.6.1.4.1.9.10.118.1.6.1.1.6
ciiISAdjNbrExtendedCircID The 4 byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.6.1.1.7
ciiISAdjUsage How is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at L1, and level2 for the adjacency between peers at L2.	Enumeration Enumerated Values: 1 level1 2 level2 3 level1and2	.1.3.6.1.4.1.9.10.118.1.6.1.1.8
ciiISAdjHoldTimer The holding time in seconds for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt.	secondsUnsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.118.1.6.1.1.9
ciiISAdjNeighPriority Priority of the neighboring Intermediate System for becoming the Designated Intermediate System.	CiiISPriority Type Constraints: range: 0..127	.1.3.6.1.4.1.9.10.118.1.6.1.1.10
ciiISAdjLastUpTime If the ciiISAdjState is in state 'up', the value of sysUpTime when the adjacency most recently entered the state 'up', or 0 if it has never been in state 'up'.	hundredths of a secondSNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.6.1.1.11

This table contains the set of Area Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs.

ciiISAdjAreaAddrEntry row .1.3.6.1.4.1.9.10.118.1.6.2.1

Each entry contains one Area Address reported by a
neighboring Intermediate System in its IIH PDUs.

Indexes

ciiCircIndex ciiISAdjIndex ciiISAdjAreaAddrIndex

Column	Syntax	OID
ciiISAdjAreaAddrIndex An index for the areas associated with one neighbor. This provides a simple way to walk the table.	Integer32 Constraints: range: 1-2000000000	.1.3.6.1.4.1.9.10.118.1.6.2.1.1
ciiISAdjAreaAddress One Area Address as reported in IIH PDUs received from the neighbor.	CiiOSINSAddress Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.6.2.1.2

This table contains the set of IP Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs.

ciiISAdjIPAddrEntry row .1.3.6.1.4.1.9.10.118.1.6.3.1

Each entry contains one IP Address reported by a
neighboring Intermediate System in its IIH PDUs.

Indexes

ciiCircIndex ciiISAdjIndex ciiISAdjIPAddrIndex

Column	Syntax	OID
ciiISAdjIPAddrIndex An index to this table which identifies the IP addresses to which this entry belongs.	Integer32 Constraints: range: 1-2000000000	.1.3.6.1.4.1.9.10.118.1.6.3.1.1
ciiISAdjIPAddrType The type of one IP Address as reported in IIH PDUs received from the neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.118.1.6.3.1.2
ciiISAdjIPAddrAddress One IP Address as reported in IIH PDUs received from the neighbor.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.118.1.6.3.1.3

This table contains the set of protocols supported by
neighboring Intermediate Systems as reported in received
IIH PDUs.

ciiISAdjProtSuppEntry row .1.3.6.1.4.1.9.10.118.1.6.4.1

Each entry contains one protocol supported by a
neighboring Intermediate System as reported in its IIH
PDUs.

Indexes

ciiCircIndex ciiISAdjIndex ciiISAdjProtSuppProtocol

Column	Syntax	OID
ciiISAdjProtSuppProtocol One supported protocol as reported in IIH PDUs received from the neighbor.	CiiSupportedProtocol Type Values: 129 iso8473 142 ipV6 204 ip	.1.3.6.1.4.1.9.10.118.1.6.4.1.1

The table of Reachable Addresses to NSAPs or Address
Prefixes.

ciiRAEntry row .1.3.6.1.4.1.9.10.118.1.7.1.1

Each entry defines a Reachable Address to a NSAP or
Address Prefix.

Indexes

ciiCircIndex ciiRAIndex

Column	Syntax	OID
ciiRAIndex The identifier for this ciiRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and ManualOrAutomatic behaviors.	Integer32 Constraints: range: 1-2000000000	.1.3.6.1.4.1.9.10.118.1.7.1.1.1
ciiRAExistState The existence state of this Reachable Address. This object follows the ManualOrAutomatic behaviors.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.7.1.1.2
ciiRAAdminState The administrative state of the Reachable Address. This object follows the CiiAdminState and ManualOrAutomatic behaviors.	CiiAdminStater/w Type Values: 1 on 2 off	.1.3.6.1.4.1.9.10.118.1.7.1.1.3
ciiRAAddrPrefix The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and ManualOrAutomatic behaviors.	CiiOSINSAddressr/w Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.7.1.1.4
ciiRAMapType The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows the ManualOrAutomatic behavior. The following values of map…	Enumerationr/w Enumerated Values: 1 none 2 explicit 3 extractIDI 4 extractDSP	.1.3.6.1.4.1.9.10.118.1.7.1.1.5
ciiRAMetric The metric value for reaching the specified prefix over this circuit. This object follows the ManualOrAutomatic behavior.	CiiDefaultMetricr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.10.118.1.7.1.1.6
ciiRAMetricType Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.	CiiMetricTyper/w Type Values: 1 internal 2 external	.1.3.6.1.4.1.9.10.118.1.7.1.1.7
ciiRASNPAAddress The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows the ManualOrAutomatic behavior.	CiiOSINSAddressr/w Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.7.1.1.8
ciiRASNPAMask A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction the first octet of the ciiRASNPAMask object value is align…	CiiOSINSAddressr/w Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.7.1.1.9
ciiRASNPAPrefix A fixed SNPA prefix for use when the ciiRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination addres…	CiiOSINSAddressr/w Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.7.1.1.10
ciiRAType The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol (eg. IDRP).	Enumerationr/w Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.9.10.118.1.7.1.1.11

The table of IP Reachable Addresses to networks,
subnetworks or hosts either manually configured or
learned from another protocol.

ciiIPRAEntry row .1.3.6.1.4.1.9.10.118.1.8.1.1

Each entry defines an IP Reachable Address to a network,
subnetwork or host.

Each IP Reachable Address may have multiple entries in the
table, one for each equal cost path to the reachable address.

Indexes

ciiIPRADestType ciiIPRADest ciiIPRADestPrefixLen ciiIPRANextHopIndex

Column	Syntax	OID
ciiIPRADestType The type of this IP Reachable Address. This object follows the ManualOrAutomatic behavior.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.118.1.8.1.1.1
ciiIPRADest The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the ManualOrAutomatic behavior.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.118.1.8.1.1.2
ciiIPRADestPrefixLen The length of the IP Netmask for Reachability Address. This object follows the ManualOrAutomatic behavior.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.9.10.118.1.8.1.1.3
ciiIPRANextHopIndex Index of next hop. Used when there are multiple Equal Cost Multipath alternatives for the same destination.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.118.1.8.1.1.4
ciiIPRANextHopType The type of the IP next hop address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.118.1.8.1.1.5
ciiIPRANextHop The IP next hop to this destination.	OctetStringr/w Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.118.1.8.1.1.6
ciiIPRAType The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. This object …	Enumerationr/w Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.9.10.118.1.8.1.1.7
ciiIPRAExistState The state of this IP Reachable Address. This object follows the ExistenceState and ManualOrAutomatic behaviors.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.118.1.8.1.1.8
ciiIPRAAdminState The administrative state of the IP Reachable Address. This object follows the CiiAdminState and ManualOrAutomatic behaviors.	CiiAdminStater/w Type Values: 1 on 2 off	.1.3.6.1.4.1.9.10.118.1.8.1.1.9
ciiIPRAMetric The metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.	CiiDefaultMetricr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.10.118.1.8.1.1.10
ciiIPRAMetricType Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.	CiiMetricTyper/w Type Values: 1 internal 2 external	.1.3.6.1.4.1.9.10.118.1.8.1.1.11
ciiIPRAFullMetric The wide metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.	CiiFullMetricr/w	.1.3.6.1.4.1.9.10.118.1.8.1.1.12
ciiIPRASNPAAddress The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the ManualOrAutomatic behavior.	CiiOSINSAddressr/w Type Constraints: range: 0..20	.1.3.6.1.4.1.9.10.118.1.8.1.1.13
ciiIPRASourceType The origin of this route.	Enumeration Enumerated Values: 1 static 2 direct 3 ospfv2 4 ospfv3 5 isis 6 rip 7 igrp 8 eigrp 9 bgp 10 other	.1.3.6.1.4.1.9.10.118.1.8.1.1.14

The table of LSP Headers.

ciiLSPSummaryEntry row .1.3.6.1.4.1.9.10.118.1.9.1.1

Each entry provides a summary describing an
LSP currently stored in the system.

Indexes

ciiLSPLevel ciiLSPID

Column	Syntax	OID
ciiLSPLevel At which level does this LSP appear?	CiiISLevel Type Values: 0 none 1 area 2 domain	.1.3.6.1.4.1.9.10.118.1.9.1.1.1
ciiLSPID The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number.	CiiLinkStatePDUID Type Constraints: range: 0 range: 8	.1.3.6.1.4.1.9.10.118.1.9.1.1.2
ciiLSPSeq The sequence number for this LSP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.9.1.1.3
ciiLSPZeroLife Is this LSP being purged by this System?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.118.1.9.1.1.4
ciiLSPChecksum The 16 bit Fletcher Checksum.	CiiUnsigned16TC Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.118.1.9.1.1.5
ciiLSPLifetimeRemain The remaining lifetime in seconds for this LSP.	secondsCiiUnsigned16TC Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.118.1.9.1.1.6
ciiLSPPDULength The length of this LSP.	CiiUnsigned16TC Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.118.1.9.1.1.7
ciiLSPAttributes Flags carried by the LSP.	CiiUnsigned8TC Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.118.1.9.1.1.8

The contents of each LSP.

ciiLSPTLVEntry row .1.3.6.1.4.1.9.10.118.1.9.2.1

Each entry describes an LSP current stored in the
system.

Indexes

ciiLSPLevel ciiLSPID ciiLSPTLVIndex

Column	Syntax	OID
ciiLSPTLVIndex The index of this TLV in the LSP. The first TLV has index 1 and the Nth TLV has an index of N.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.9.2.1.1
ciiLSPTLVSeq The sequence number for this LSP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.118.1.9.2.1.2
ciiLSPTLVChecksum The 16 bit Fletcher Checksum.	CiiUnsigned16TC Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.10.118.1.9.2.1.3
ciiLSPTLVType The type of this TLV.	CiiUnsigned8TC Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.118.1.9.2.1.4
ciiLSPTLVLen The length of this TLV.	CiiUnsigned8TC Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.118.1.9.2.1.5
ciiLSPTLVValue The value of this TLV.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.10.118.1.9.2.1.6