CISCO-IETF-DHCP-SERVER-MIB
The MIB module for entities implementing the server side of
the Bootstrap Protocol (BOOTP) and the Dynamic Host
Configuration protocol (DHCP) for Internet Protocol version
4(IPv4). This MIB does not include support for Dynamic DNS
(DDNS) updating nor for the DHCP Failover Protocol.
- Source file
CISCO-IETF-DHCP-SERVER-MIB- Last revised
- Identity
ciscoIetfDhcpSrvMIB- Base OID
1.3.6.1.4.1.9.10.102
Imported Objects
| CISCO-SMI | ciscoExperiment |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressPrefixLength |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-DHCP-SERVER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-DHCP-SERVER-MIB::ciscoIetfDhcpSrvMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-DHCP-SERVER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-DHCP-SERVER-MIB::ciscoIetfDhcpSrvMIB'
Objects (91)
Showing 91 of 91 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.10.102 |
||
.1.3.6.1.4.1.9.10.102.0 |
||
.1.3.6.1.4.1.9.10.102.0.2 |
||
.1.3.6.1.4.1.9.10.102.0.2.0 |
||
.1.3.6.1.4.1.9.10.102.1 |
||
.1.3.6.1.4.1.9.10.102.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.102.1.1.1 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.9.10.102.1.1.2 |
|
.1.3.6.1.4.1.9.10.102.1.2 |
||
.1.3.6.1.4.1.9.10.102.1.2.1 |
||
.1.3.6.1.4.1.9.10.102.1.2.2 |
||
.1.3.6.1.4.1.9.10.102.1.2.3 |
||
.1.3.6.1.4.1.9.10.102.1.2.4 |
||
.1.3.6.1.4.1.9.10.102.1.2.5 |
||
.1.3.6.1.4.1.9.10.102.1.3 |
||
.1.3.6.1.4.1.9.10.102.1.3.1 |
||
.1.3.6.1.4.1.9.10.102.1.3.10 |
||
.1.3.6.1.4.1.9.10.102.1.3.11 |
||
.1.3.6.1.4.1.9.10.102.1.3.12 |
||
.1.3.6.1.4.1.9.10.102.1.3.2 |
||
.1.3.6.1.4.1.9.10.102.1.3.3 |
||
.1.3.6.1.4.1.9.10.102.1.3.4 |
||
.1.3.6.1.4.1.9.10.102.1.3.5 |
||
.1.3.6.1.4.1.9.10.102.1.3.6 |
||
.1.3.6.1.4.1.9.10.102.1.3.7 |
||
.1.3.6.1.4.1.9.10.102.1.3.8 |
||
.1.3.6.1.4.1.9.10.102.1.4 |
||
.1.3.6.1.4.1.9.10.102.1.4.1 |
||
.1.3.6.1.4.1.9.10.102.1.4.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.102.1.4.1.1.1 |
|
.1.3.6.1.4.1.9.10.102.1.4.1.1.2 |
||
.1.3.6.1.4.1.9.10.102.1.4.1.1.3 |
||
.1.3.6.1.4.1.9.10.102.1.4.1.1.4 |
||
.1.3.6.1.4.1.9.10.102.1.4.1.1.5 |
||
.1.3.6.1.4.1.9.10.102.1.4.1.1.6 |
||
.1.3.6.1.4.1.9.10.102.1.4.2 |
||
.1.3.6.1.4.1.9.10.102.1.4.2.1 |
||
.1.3.6.1.4.1.9.10.102.1.4.2.1.1 |
||
.1.3.6.1.4.1.9.10.102.1.4.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.102.1.4.2.1.3 |
|
.1.3.6.1.4.1.9.10.102.1.4.2.1.4 |
||
.1.3.6.1.4.1.9.10.102.1.4.2.1.5 |
||
.1.3.6.1.4.1.9.10.102.1.4.2.1.6 |
||
.1.3.6.1.4.1.9.10.102.1.4.3 |
||
.1.3.6.1.4.1.9.10.102.1.4.3.1 |
||
.1.3.6.1.4.1.9.10.102.1.4.3.1.1 |
||
.1.3.6.1.4.1.9.10.102.1.4.3.1.2 |
||
.1.3.6.1.4.1.9.10.102.1.4.3.1.3 |
||
.1.3.6.1.4.1.9.10.102.1.4.3.1.4 |
||
.1.3.6.1.4.1.9.10.102.1.4.3.1.5 |
||
.1.3.6.1.4.1.9.10.102.1.4.4 |
||
.1.3.6.1.4.1.9.10.102.1.4.4.1 |
||
.1.3.6.1.4.1.9.10.102.1.4.4.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.10 |
|
|
OctetString
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.11 |
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.2 |
||
.1.3.6.1.4.1.9.10.102.1.4.4.1.3 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.4 |
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.7 |
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.8 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.102.1.4.4.1.9 |
|
.1.3.6.1.4.1.9.10.102.1.7 |
||
.1.3.6.1.4.1.9.10.102.1.7.1 |
||
.1.3.6.1.4.1.9.10.102.1.7.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.102.1.7.3 |
|
.1.3.6.1.4.1.9.10.102.1.7.4 |
||
.1.3.6.1.4.1.9.10.102.1.7.5 |
||
.1.3.6.1.4.1.9.10.102.1.8 |
||
.1.3.6.1.4.1.9.10.102.1.8.1 |
||
.1.3.6.1.4.1.9.10.102.1.8.2 |
||
.1.3.6.1.4.1.9.10.102.1.8.3 |
||
.1.3.6.1.4.1.9.10.102.1.8.4 |
||
.1.3.6.1.4.1.9.10.102.1.8.5 |
||
.1.3.6.1.4.1.9.10.102.1.9 |
||
.1.3.6.1.4.1.9.10.102.1.9.1 |
||
.1.3.6.1.4.1.9.10.102.1.9.10 |
||
.1.3.6.1.4.1.9.10.102.1.9.11 |
||
.1.3.6.1.4.1.9.10.102.1.9.12 |
||
.1.3.6.1.4.1.9.10.102.1.9.2 |
||
.1.3.6.1.4.1.9.10.102.1.9.3 |
||
.1.3.6.1.4.1.9.10.102.1.9.4 |
||
.1.3.6.1.4.1.9.10.102.1.9.5 |
||
.1.3.6.1.4.1.9.10.102.1.9.6 |
||
.1.3.6.1.4.1.9.10.102.1.9.7 |
||
.1.3.6.1.4.1.9.10.102.1.9.8 |
||
.1.3.6.1.4.1.9.10.102.1.9.9 |
||
.1.3.6.1.4.1.9.10.102.2 |
||
.1.3.6.1.4.1.9.10.102.2.1 |
||
.1.3.6.1.4.1.9.10.102.2.2 |
Dependencies (6) 6 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-IETF-DHCP-SERVER-MIBciscoselected
Type Definitions (1)
| OctetString |
range: 18 |
Conformance Groups (11)
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.10.102.2.1.1This group describes the requirements for conformance to the
DHCP Server MIB. A DHCPv4 server implementation is only
required to support IPv4 addresses.
DHCP Server MIB. A DHCPv4 server implementation is only
required to support IPv4 addresses.
Required groups
| mandatory | cDhcpv4SrvSystemObjects | |
| mandatory | cBootpCountersGroup | |
| mandatory | cDhcpv4CounterObjects | |
| mandatory | cBootpHCCountersGroup | |
| mandatory | cDhcpv4HCCounterObjects |
OID
.1.3.6.1.4.1.9.10.102.2.1.2This group describes the requirements for conformance to the
DHCP Server MIB. A DHCPv4 server implementation is only
required to support IPv4 addresses.
DHCP Server MIB. A DHCPv4 server implementation is only
required to support IPv4 addresses.
Required groups
| mandatory | cDhcpv4SrvSystemObjects | |
| mandatory | cBootpCountersGroup | |
| mandatory | cDhcpv4CounterObjects | |
| mandatory | cBootpHCCountersGroup | |
| mandatory | cDhcpv4HCCounterObjects | |
| mandatory | cDhcpv4ServerSharedNetObjects | |
| mandatory | cDhcpv4ServerSubnetObjects | |
| mandatory | cDhcpv4ServerRangeObjects | |
| mandatory | cDhcpv4ServerClientObjects | |
| mandatory | cDhcpv4ServerNotifyObjectsGroup | |
| mandatory | cDhcpv4ServerNotificationsGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cDhcpv4ServerSharedNetFreeAddrLowThreshold | readonly | Write access is not required. | |
| cDhcpv4ServerSharedNetFreeAddrHighThreshold | readonly | Write access is not required. | |
| cDhcpv4ServerSubnetFreeAddrLowThreshold | readonly | Write access is not required. | |
| cDhcpv4ServerSubnetFreeAddrHighThreshold | readonly | Write access is not required. |
Notifications / Traps (5)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.10.102.0.2.0.1 |
This notification signifies that the number of available IPv4
addresses for a particular shared network has fallen below the value of cDhcpv4ServerSharedNetFreeAddrLowThreshold for that shared network. |
|
.1.3.6.1.4.1.9.10.102.0.2.0.2 |
This notification signifies that the number of available IPv4
addresses for a particular shared network has risen above the value of cDhcpv4ServerSharedNetFreeAddrHighThreshold for that shared network. |
|
.1.3.6.1.4.1.9.10.102.0.2.0.3 |
This notification signifies that the server of the specified
type has started on the host from which this notification has been sent. |
|
.1.3.6.1.4.1.9.10.102.0.2.0.4 |
This notification signifies that the server of the specified
type has stopped normally on the host from which this notification has been sent. |
|
.1.3.6.1.4.1.9.10.102.0.2.0.5 |
This notification signifies that a duplicate IPv4 address has
been detected. The DHCP server can detect this condition through the ping-before-offer mechanism. Alternatively, the client may have sent a DHCPDECLINE back to the server; this is assumed to be the result of the client detecting that the address was in use. In either case, the DHCP server marks the IPv4 address as unavailable for leasing to clients. The cDhcpv4ServerNotifyClientOrServerDetected object indicates whether the client or server detected this condition. |