CISCO-HW-MODULE-CONTROL-MIB
The MIB module providing configuration and control
information for management of hardware modules and
components on Cisco devices.
The following features are managed: bandwidth
oversubscription, clearing of HoL(Head of Line)
blocking, etc.
Bandwidth oversubscription: a group of ports are
said to be operating in bandwidth oversubscription
mode if the amount of internal forwarding fabric
bandwidth allocated to the group of ports on a
switching or routing device is less than the aggregate
maximum connection speeds of these ports.
Clearing of HoL blocking: refers to the process
in which if any port of a port group receives a
pause frame from the remote side, it will block
packet transmission on all ports of the port group
till a packet is delivered to the flow controlled
port. If the clearing of HoL blocking feature is
disabled, the device will drop packets destined
for the jammed ports and continue delivering
packets for the other ports.
- Source file
CISCO-HW-MODULE-CONTROL-MIB- Last revised
- Identity
ciscoHwModuleControlMIB- Base OID
1.3.6.1.4.1.9.9.714
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoInterfaceIndexList |
| ENTITY-MIB | entPhysicalIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-HW-MODULE-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-HW-MODULE-CONTROL-MIB::ciscoHwModuleControlMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-HW-MODULE-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-HW-MODULE-CONTROL-MIB::ciscoHwModuleControlMIB'
Objects (23)
Showing 23 of 23 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.714 |
||
.1.3.6.1.4.1.9.9.714.0 |
||
.1.3.6.1.4.1.9.9.714.1 |
||
.1.3.6.1.4.1.9.9.714.1.1 |
||
.1.3.6.1.4.1.9.9.714.1.1.1 |
||
.1.3.6.1.4.1.9.9.714.1.1.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.714.1.1.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.714.1.1.1.1.2 |
|
.1.3.6.1.4.1.9.9.714.1.1.2 |
||
.1.3.6.1.4.1.9.9.714.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.714.1.1.2.1.1 |
|
.1.3.6.1.4.1.9.9.714.1.1.2.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.714.1.1.2.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.714.1.1.2.1.4 |
|
.1.3.6.1.4.1.9.9.714.1.2 |
||
.1.3.6.1.4.1.9.9.714.1.2.1 |
||
.1.3.6.1.4.1.9.9.714.1.2.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.714.1.2.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.714.1.2.1.1.2 |
|
.1.3.6.1.4.1.9.9.714.1.2.1.1.3 |
||
.1.3.6.1.4.1.9.9.714.2 |
||
.1.3.6.1.4.1.9.9.714.2.1 |
||
.1.3.6.1.4.1.9.9.714.2.2 |
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-TCcisco
- IANA-ENTITY-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- CISCO-HW-MODULE-CONTROL-MIBciscoselected
Conformance Groups (3)
|
chmcOversubModuleCapabilities chmcOversubModOversubStatus chmcOversubPortGrpIfIndexList chmcOversubPortGrpOversubStatus
A collection of objects providing information about
the bandwidth oversubscription and/or clearing of HoL blocking features for hardware modules capable of providing such features. |
.1.3.6.1.4.1.9.9.714.2.2.1
|
|
|
A collection of objects describing the clearing
of HoL blocking support at port group level for each hardware module capable of providing such feature. |
.1.3.6.1.4.1.9.9.714.2.2.2
|
|
|
A collection of objects providing the operational
mode information at port group level for each physical module capable of providing such feature. |
.1.3.6.1.4.1.9.9.714.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.714.2.1.1The compliance statement for CISCO-HW-MODULE-CONTROL-MIB.
Required groups
| optional | ciscoHmcMIBOversubBaseGroup |
This group is mandatory for devices that support either the bandwidth oversubscription feature alone or both the bandwidth oversubscription and the clearing of HoL blocking feature. |
| optional | ciscoHmcMIBOversubPgClearBlkGrp |
This group is mandatory for devices that support the clearing of HoL blocking feature. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| chmcOversubModOversubStatus | readonly | Write access is not required. | |
| chmcOversubPortGrpOversubStatus | readonly | Write access is not required. | |
| chmcOversubPortGrpClearBlkStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.714.2.1.2The compliance statement for CISCO-HW-MODULE-CONTROL-MIB.
Required groups
| optional | ciscoHmcMIBOversubBaseGroup |
This group is mandatory for devices that support either the bandwidth oversubscription feature alone or both the bandwidth oversubscription and the clearing of HoL blocking feature. |
| optional | ciscoHmcMIBOversubPgClearBlkGrp |
This group is mandatory for devices that support the clearing of HoL blocking feature. |
| optional | ciscoHmcMIBOperModeGroup |
This group is mandatory for devices that supports the port group operational mode feature. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| chmcOversubModOversubStatus | readonly | Write access is not required. | |
| chmcOversubPortGrpOversubStatus | readonly | Write access is not required. | |
| chmcOversubPortGrpClearBlkStatus | readonly | Write access is not required. | |
| chmcOperModePortGrpOperMode | readonly | Write access is not required. |