CISCO-GPRS-ACC-PT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
14
Rows
14
Columns
220
.1.3.6.1.4.1.9.9.183.1.1.1 · 1 row entry · 36 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtTable'
This table contains a list of access points configured
on this Gateway.
cgprsAccPtEntry row .1.3.6.1.4.1.9.9.183.1.1.1.1
A description of an access point. Access point
parameters cannot be changed when active PDP's or
Bearer's exists on the Gateway.
Indexes
Column Syntax OID
A locally unique identifier for this access point on
this Gateway.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.4.1.9.9.183.1.1.1.1.1
This object is used to create or delete conceptual
row in this table.

To create a row, set this object to 'createAndGo'.
There are no mandatory objects in a create request.

To delete a row,…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.183.1.1.1.1.2
The Access Point Name. It is composed of two parts:

- The APN Network Identifier is mandatory and is a
fully qualified domain name according to the DNS
naming conventions, e.g., 'company.com.'.
OctetStringr/w
Constraints:
range: 0-100
.1.3.6.1.4.1.9.9.183.1.1.1.1.3
Specifies the type of access allowed to the PDN
through this access point.

- 'transparent', indicates that users can access
without authentication.

- 'nontransparent', indicate…
Enumerationr/w
Enumerated Values:
1transparent
2nontransparent
.1.3.6.1.4.1.9.9.183.1.1.1.1.4
Specifies a dynamic address allocation method for
this access point.

- 'global', which indicates that no method is
defined specifically to this access point and the
DHCP or radius server con…
Enumerationr/w
Enumerated Values:
1global
2dhcp
3radius
4disable
5local
.1.3.6.1.4.1.9.9.183.1.1.1.1.5
This object specifies the IP address of the primary
DHCP server from which a mobile subscriber can request
an IP address assignment for the access of this APN.

In case this DHCP server is not available, t…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.183.1.1.1.1.6
The IP address of the secondary DHCP server.

The secondary DHCP server is used if the primary
DHCP server is not available. This object can be
set after configuring primary DHCP server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.183.1.1.1.1.7
This object specifies the DHCP Gateway address that
is used in the 'giaddr' field of the DHCP request.
It is used by DHCP to determine from which pool the
IP address will be allocated.

If no DHCP Gatew…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.183.1.1.1.1.8
This object specifies the IP address of the primary
RADIUS server used by this access point to
authenticate and/or authorize mobile users to access
the PDN.

In case this RADIUS server is not available, …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.183.1.1.1.1.9
Specifies a secondary RADIUS server.

The secondary RADIUS server will be used if the primary
RADIUS server is not available.

Obsoleted by cgprsAccPtAaaAuthServerGroup and
cgprsAccPtAaaAcco…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.183.1.1.1.1.10
This object specifies the ACL against which to compare
packets received at this Access Point from the PDN for
forwarding towards an MS.

Access list at the access point level is used to
control which pack…
AccessControlListIdr/w
Type Constraints:
range: 1..2699
.1.3.6.1.4.1.9.9.183.1.1.1.1.11
This object specifies the ACL against which to compare
packets originated by an MS and received by at this
Access Point for forwarding to the PDN.

Access list at the access point level is used to
contro…
AccessControlListIdr/w
Type Constraints:
range: 1..2699
.1.3.6.1.4.1.9.9.183.1.1.1.1.12
Specifies an interface to be used by GGSN on Gi
interface.

The value zero indicates that no interface is
specified.

The cgprsAccPtIfNextHop must be specified if this
object is set to th…
CISCO-TCInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.183.1.1.1.1.13
Specifies the IP address of the next hop for the
Gi interface, specified by cgprsAccPtIfIndex.

This value is mandatory if the value of
cgprsAccPtIfIndex is non-zero. Setting the
cgprsAccPtIfIndex object…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.183.1.1.1.1.14
Specifies how access violation should be treated.

An access violation occurs if the IP packets violates
any rules in ACL as specified by either
cgprsAccPtIPAccListGroupIn or
cgprsAccPtIPAccListGroupOut.…
Enumerationr/w
Enumerated Values:
1discardPacket
2terminateSession
.1.3.6.1.4.1.9.9.183.1.1.1.1.15
This object indicates if a user needs to subscribe
to this access point before accessing it.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.16
This object indicates whether network (PDN)
initiated PDP or Bearer sessions are allowed for
this access point. The more common case, is false,
which indicates that the PDP or Bearer is initiated
by the MS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.17
Indicates the number of IP addresses allocated to
MS's.

Trigger Condition: This gauge is
incremented/decremented by successful completion of
create/delete dynamic PDP or Bearer context request
message re…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.1.1.1.18
The number of mobile subscribers currently accessing
this APN. Obsoleted by cgprsAccPtActivePdps.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.1.1.1.19
This object indicates maximum idle connection time
allowed to the PDP or Bearer context before termination of the
GTP session. A value of 0 means session idle timer
is not used.
hoursUnsigned32r/w
Constraints:
range: 0-168
.1.3.6.1.4.1.9.9.183.1.1.1.1.20
This object indicates whether access to a roaming
MS needs to be blocked for this APN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.21
This object specifies the anonymous user name, which
is used when a MS tries to access a non-transparent
APN without supplying user name and password.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.1.1.22
This object specifies the password corresponding
to cgprsAccPtAnonymousUserName. For security reasons,
retrieving this object returns a zero-length string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.1.1.23
This object specifies whether the ISDN ID used
by the MS, when authenticating with a radius server,
needs to be suppressed or not. When set to 'true',
the ISDN ID attribute will not be sent by the Gateway.
When set to…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.24
This object specifies the value that will be
transmitted to the radius server in place of
mobile stations ISDN ID. This object can only
be set if cgprsAccPtMsIsdnSuppressed is 'true'.

Valid characters …
OctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.9.9.183.1.1.1.1.25
This object specifies the AAA radius server group
that is used for authentication by this APN.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.1.1.26
This object specifies the AAA radius server group
that is used for accounting by this APN. If no
group is specified for accounting,
cgprsAccPtAaaAuthServerGroup will be used.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.1.1.27
This object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgprsAccPtAaaAccountServerGroup is not
speci…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.28
This object specifies the type of APN.

'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. When this object is set to 'virtual',
all othe…
Enumerationr/w
Enumerated Values:
1real
2virtual
3virtualPreAuth
.1.3.6.1.4.1.9.9.183.1.1.1.1.29
This object specifies the name of the VRF with
which this APN is associated.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.1.1.30
This object specifies the address space used
by the dhcp server. This object can only be
set if cgprsAccPtDHCPServerPri is set.
Enumerationr/w
Enumerated Values:
1global
2vrf
.1.3.6.1.4.1.9.9.183.1.1.1.1.31
This object is used to enable Gateway to regenerate
a PPP session for each IP PDP or Bearer context on
this APN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.32
This object specifies the maximum number of regenerated
PPP sessions allowed for this access-point.

This object can only be set if cgprsAccPtPppRegenEnable
is set to 'true'.

The maximum val…
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.9.9.183.1.1.1.1.33
This object specifies the maximum tolerance time within
which a regenerated PPP session has to fully come up.

This object can only be set if cgprsAccPtPppRegenEnable
is set to 'true'.
secondsInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.9.9.183.1.1.1.1.34
This object is used to enable auto aggregation on this
APN. When a user tries to configure entries in
cgprsAccPtAggregTable, this object will automatically
be set to 'false'. When this object is set to 'true',
the en…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.1.1.35
This object represents the Proxy-CSCF server group that
will be used by this APN. The Proxy-CSCF server group
contains a list of Proxy-CSCF addresses which will be
provided to the MS(UE) in response to a PDP or Bearer
OctetStringr/w
Constraints:
range: 0-100
.1.3.6.1.4.1.9.9.183.1.1.1.1.36
.1.3.6.1.4.1.9.9.183.1.1.2 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtAggregTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtAggregTable'
This table contains the list of aggregate routes
configured on this APN. Gateway uses a static host route 
to forward user data packets for each PDP or Bearer context 
received from Gi interface to Gn interface.  Using the 
aggregate route (address range), total number of static 
routes implemented in the Gateway for PDP or Bearer requests
can be greatly reduced.  If there is no aggregate route 
configured on this access-point, then default aggregate 
routes configured on Gateway will be used.
cgprsAccPtAggregEntry row .1.3.6.1.4.1.9.9.183.1.1.2.1
An Entry contains the IP network prefix which is used
to combine the routes of PDP or Bearer requests for the same
network as a single route on the Gateway.
Column Syntax OID
This object specifies the type of Internet address
denoted by cgprsAccPtAggregIpAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.2.1.1
This object specifies the IP address whose network
prefix is going to be defined by
cgprsAccPtAggregIpMask.

When this object is set, cgprsAccPtAggregIpMask must be
specified.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.2.1.2
This object specifies the net-mask pertaining to
cgprsAccPtAggregIpAddr.
CISCO-TCCiscoInetAddressMask
Type Constraints:
range: 0..128
.1.3.6.1.4.1.9.9.183.1.1.2.1.3
This object is used to create a new row or delete an
existing row in this table.

To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.183.1.1.2.1.4
This object specifies the name of the CSG Group.

The value must be same as an entry in
cgprsAccPtCsgGroupTable identified by
cgprsAccPtCsgGroupName.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.2.1.5
.1.3.6.1.4.1.9.9.183.1.1.3 · 1 row entry · 33 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtExtTable'
This table is an extension of cgprsAccPtTable.
cgprsAccPtExtEntry row .1.3.6.1.4.1.9.9.183.1.1.3.1
An entry in cgprsAccPtExtTable.
Indexes
No indexes recorded
Column Syntax OID
When this object is set to 'true', ACL denoted by
cgprsAccPtIPAccListGroupIn will be active. When
set to 'false', it will become inactive.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.1
When this object is set to 'true', ACL denoted by
cgprsAccPtIPAccListGroupOut will be active. When
set to 'false', it will become inactive.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.2
When this object is set to 'true', Gateway waits for a
RADIUS accounting response before sending a create PDP
or Bearer context response to the MME or SGSN, for create
PDP or Bearer context requests received at a partic…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.3
This object specifies whether GGSN will be sending
the radius attribute, IMSI value, in any of the
radius requests to the radius server or not. When set
to 'true', the IMSI attribute will not be sent by
the GGSN. Whe…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.4
When this object is set to 'true', the Gateway will check the
upstream TPDU source address against the address
previously assigned to this user. If the addresses are
different, the TPDU is dropped, the notification
cg…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.5
When this object is set to 'true', Gateway will check the
upstream TPDU destination address against the range of
IP addresses reserved for PLMN devices. If there is a
match, the TPDU is dropped, the notification
cgprsA…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.6
This object indicates the type of Internet address by
which cgprsAccPtRedirInterMobilAddr is reachable.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.3.1.7
This object represents the IP address of the device
to which inter-mobile traffic will be re-directed.
When this redirection is active on an APN, before
downstream packets exit the Gateway, they are screened
to see if t…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.3.1.8
This object indicates the attributes that will be
suppressed by the Gateway in its its authorization and
accounting requests to the RADIUS server.
Bitsr/w
Enumerated Values:
0none
1imsi
2sgsnAddr
3qos
.1.3.6.1.4.1.9.9.183.1.1.3.1.9
This object is used to enable Interim Accounting for a
PDP or Bearer context on this APN. When set to 'true',
accounting updates will be triggered whenever a update
PDP or Bearer request is received. This object can se…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.10
This object indicates the values set in various radius
attributes by the Gateway while communicating with RADIUS
Server. When set to

'none' - reset the value set by the options below.

'use…
Bitsr/w
Enumerated Values:
0none
1userNameMsisdn
2accSessIdChargingId
.1.3.6.1.4.1.9.9.183.1.1.3.1.11
This object denotes the operation mode of this APN.
Each mode has different PDP or Bearer context activation and
deactivation behavior and is given as below:

inService - normal operational mode in which a…
Enumerationr/w
Enumerated Values:
0inService
1maintenance
.1.3.6.1.4.1.9.9.183.1.1.3.1.12
Absolute session timer is a RADIUS attribute (#27) sent
by the AAA server in the Access-Accept packet. The Gateway
will deactivate the PDP or Bearer when this timer expires. This
object denotes the timer used by the G…
secondsUnsigned32r/w
Constraints:
range: 30-4294967
range: 0-0
.1.3.6.1.4.1.9.9.183.1.1.3.1.13
This object denotes the value used as NAS ID in the
RADIUS access requests sent by the Gateway on this APN. A
zero length string needs to be set to unconfigure the
NAS ID value.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.3.1.14
Per PDP or Bearer Policy feature on the Gateway ensures
that the PDP or Bearer contexts does not exceed bandwidth
negotiated as part of PDP or Bearer context activation
procedure. A service policy contains classificatio…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.9.9.183.1.1.3.1.15
This object denotes the name of the service policy that
is applicable to outbound traffic on all the PDP's or Bearer's
pertaining to this APN.
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.9.9.183.1.1.3.1.16
When this object is set to 'true', a PPP regen session
creation would be rejected if the domain name in PCO
field is different than the APN name. This object can
only be set when cgprsAccPtPppRegenEnable is 'true'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.17
This object represents the name of the local address
pool used when cgprsAccPtIpAddressPool is set to
'local'.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.3.1.18
This object is to enable service-aware billing
(Diameter Credit Control Application [DCCA]
support) on the access-point. This object can be
set only when the object cGgsnSAServiceAware present
in CISCO-GGSN-SERVICE-AWAR…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.19
This object indicates the type of Internet address
of downlink next hop address.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.3.1.20
This object advertises the next hop address on the
Gateway to which downlink traffic destined for the Gateway
is to be routed. The address type is given by the
cgprsAccPtAdvDownlinkNextHopAddrType object.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.3.1.21
This object denotes the action to be taken when a COA
initiated update request for QOS change fails for a
PDP or Bearer context on this Access Point. If the object is
set to 'true' and the update response from MME or SG…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.22
This object specifies the periodic accounting timer
interval value for the access point. When this object
is set to a value, 'interim' type accounting records
will be sent at the specified interval for the PDP or
Beare…
minutesUnsigned32r/w
Constraints:
range: 15-71582
range: 0-0
.1.3.6.1.4.1.9.9.183.1.1.3.1.23
This object when set to 'true', enables Gateway to receive
and use the Accounting Periodic Interval from Radius for
the PDP or Bearer contexts on this APN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.24
This object when set to 'true', indicates that this APN
is Gx enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.25
The Proxy-CSCF server group represented by the object
cgprsAccPtPcscfServerGroupName contains a list of
Proxy-CSCF addresses which will be provided to the MS(UE)
in the PCO (Protocol Configuration Option) response messa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.26
This object when set to 'true', enables the Gateway to support
a network behind the Mobile Station.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.27
This object indicates the number of subnetworks that can
be permitted behind the Mobile station. This object can be
set only when the object cgprsAccPtNetworkBehindMsEnable is
set to 'true' as this object can take effec…
Unsigned32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.9.9.183.1.1.3.1.28
This object denotes the charging record type of this APN.
Each type has different PDP or Bearer context behavior and
is given as below:

noconfig - When no record type is configured.

none - …
Enumerationr/w
Enumerated Values:
0noconfig
1none
2gcdr
3egcdr
.1.3.6.1.4.1.9.9.183.1.1.3.1.29
This object provides the charging group identifier to
which an access point is associated with. By default the
value of this object is 0, it indicates that the default
charging group is associated with this access point…
Unsigned32r/w
Constraints:
range: 0-29
.1.3.6.1.4.1.9.9.183.1.1.3.1.30
This object indicates whether route propagation from PCOP to
SUP (Supervisor) shall occur. This object can be set/unset
only when the object cgprsAccPtIpAddressPool is configured.
By default the value of this object is …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.31
This object when set to 'true' indicates that the APN has dual
stack capability.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.32
This object indicates that the Gateway is programmed
to check and reject all downstream packets with same
source and destination.

When the value is set to 'true', the Gateway check and
reject all downstre…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.3.1.33
.1.3.6.1.4.1.9.9.183.1.1.4.1 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtGenServerConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtGenServerConfigTable'
Each column in this table represent IP address of
different generic servers, for example: DNS, NetBIOS, 
configured on the APN.
cgprsAccPtGenServerConfigEntry row .1.3.6.1.4.1.9.9.183.1.1.4.1.1
An entry in cgprsAccPtGenServerConfigTable.
Indexes
No indexes recorded
Column Syntax OID
This object indicates the type of Internet address by
which cgprsAccPtPriDnsServer and cgprsAccPtSecDnsServer
are reachable.

DNS addresses to be sent to the MS can come from DHCP
server or RADIUS server b…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.4.1.1.1
This object specifies the IP address of the primary
DNS server that will be sent to MS.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.4.1.1.2
This object specifies the IP address of the secondary
DNS server that will be sent to MS. A secondary server
can be configured only if primary exists.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.4.1.1.3
This object indicates the type of Internet address by
which cgprsAccPtPriNetbiosServer and
cgprsAccPtSecNetbiosServer are reachable.

NBNS addresses to be sent to the MS can come from DHCP
server or RADIUS…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.4.1.1.4
This object specifies the IP address of the primary
NetBIOS name server(NBNS) that will be sent to MS.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.4.1.1.5
This object specifies the IP address of the secondary
NetBIOS name server(NBNS) that will be sent to MS. A
secondary server can be configured only if primary
exists.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.4.1.1.6

cgprsAccPtImsConfigTable

table deprecated
.1.3.6.1.4.1.9.9.183.1.1.5.1 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtImsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtImsConfigTable'
IP Multimedia Subsystem(IMS) has been introduced in
3GPP release 5 for the provision of multimedia services.
The Gateway terminates the GPRS Bearer to carry IMS signaling
and traffic. It communicates with Policy Decision
Function(PDF) over the Go interface and acts as a Policy
Enforcement Point(PEP) to enforce QoS per media flows
using COPS protocol.
          
This table represents various parameters required to
support IMS.  This table is deprecated as IMS is not
supported from GGSN 5.0 release onwards.
cgprsAccPtImsConfigEntry row .1.3.6.1.4.1.9.9.183.1.1.5.1.1
An entry in cgprsAccPtImsConfigTable
Indexes
No indexes recorded
Column Syntax OID
This object indicates whether IMS traffic, both
signaling and data, is allowed on this APN. When set to

disable - IMS traffic is not allowed.
enable - IMS traffic is allowed.
exclusive - Only IMS tra…
Bitsr/w
Enumerated Values:
0disable
1enable
2exclusive
3transformPrimary
.1.3.6.1.4.1.9.9.183.1.1.5.1.1.1
This object represents the Proxy-CSCF server group that
will be used by this APN. Proxy-CSCF server group
contains list of Proxy-CSCF addresses which will be
provided to MS(UE) in response to a PDP contexts
for which P…
OctetStringr/w
Constraints:
range: 0-100
.1.3.6.1.4.1.9.9.183.1.1.5.1.1.2
This object represents the access list that will be
applied to all the IMS signaling PDP context received
by this APN from the PDN for forwarding towards a MS.
An IMS signaling PDP context will have IMS signaling
flag s…
AccessControlListOrZeror/w
Type Constraints:
range: 0..199
range: 1300..2699
.1.3.6.1.4.1.9.9.183.1.1.5.1.1.3
This object represents the access list that will be
applied to all the IMS signaling PDP context received
by this APN from a MS for forwarding towards PDN. An
IMS signaling PDP context will have IMS signaling flag
set …
AccessControlListOrZeror/w
Type Constraints:
range: 0..199
range: 1300..2699
.1.3.6.1.4.1.9.9.183.1.1.5.1.1.4
This object represents the action to be taken on a non
IMS PDP context, when cgprsAccPtImsEnable is set to
'true' on this APN. When this object is set to 'true',
respective PDP context activation will be rejected.
When…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.5.1.1.5
.1.3.6.1.4.1.9.9.183.1.1.6.1 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtChgProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtChgProfTable'
Charging characteristics is a parameter that allows the
operator to apply different charging methods on a per
PDP or Bearer basis.  Each charging profile is associated
with an index, set of charging parameters like subscriber
category, volume limit trigger, etc., details of the
same is outside the scope of the MIB and are defined
in CISCO-GPRS-CHARGING-MIB.
          
Charging characteristics can be received from MME or SGSN as
an Information Element in the create PDP/Bearer request or
defaults can be configured at the Gateway and/or APN level.
          
This table represents the charging profiles that can
be applied to different type of mobile subscribers on
an APN.  The Gateway level configurations are dealt in
CISCO-GPRS-CHARGING-MIB.
cgprsAccPtChgProfEntry row .1.3.6.1.4.1.9.9.183.1.1.6.1.1
An entry in cgprsAccPtChgProfTable.
Column Syntax OID
This object represents the type of MS to which the
charging profile selected by cgprsAccPtChgProfile is
applied on this APN. Different types of MS -

A roaming MS belongs to a MME/SGSN of a different PLMN.…
Enumeration
Enumerated Values:
1all
2home
3roaming
4roamingTrusted
5visiting
6visitingTrusted
.1.3.6.1.4.1.9.9.183.1.1.6.1.1.1
This object represents the charging profile number to
be applied to MS denoted by cgprsAccPtMsType on this
APN. Details of charging profile parameters are outside
the scope of this MIB and are covered by
CISCO-GPRS-CH…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.1.6.1.1.2
This object specifies whether charging characteristics
value supplied by MME or SGSN will be ignored and the values
supplied in this table are used. When this object is
set to 'true', the value supplied by MME or SGSN …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.6.1.1.3
This object is used to create a new row or delete an
existing row in this table.

To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.183.1.1.6.1.1.4
.1.3.6.1.4.1.9.9.183.1.1.7.1 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtCacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtCacTable'
Call Admission Control(CAC) on the Gateway ensures that
required network resources are available for real-time
data traffic, such as voice, video, etc., and to support
establishment and modification of the QoS parameters by
signaling and negotiating during PDP or Bearer context
activation procedure and modification procedure. CAC
performs this by examining various QoS parameters like
traffic class, maximum bit rate and guaranteed bit rate
for both uplink and downlink received from the MME or
SGSN with the local configured parameters or policy
received from Policy Decision Function(PDF).
          
This table represents various parameters required to
support CAC.
cgprsAccPtCacEntry row .1.3.6.1.4.1.9.9.183.1.1.7.1.1
An entry in cgprsAccPtCacTable.
Indexes
No indexes recorded
Column Syntax OID
This object represents the local policy name that will
be used by CAC for the PDP's or Bearer's pertaining to
this APN.

Details of QoS parameters pertaining to a CAC policy
are out of scope of this MIB an…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.9.9.183.1.1.7.1.1.1
A Bandwidth pool is a user defined pool with bandwidth
pre-allocation details like amount of available
bandwidth, percent of bandwidth available to a specific
traffic class. CAC uses this information during PDP or
Bear…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.9.9.183.1.1.7.1.1.2
This object represents the name of the bandwidth pool
used for downstream traffic. Configuration of the
bandwidth pool is covered in CISCO-GGSN-QOS-MIB.

A zero-length string denotes that no policy is
conf…
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.9.9.183.1.1.7.1.1.3
.1.3.6.1.4.1.9.9.183.1.1.8.1 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtRouteProbeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtRouteProbeTable'
Route probe feature enables the Gateway to send out a route
probe packet to a configured destination after a
successful PDP or Bearer activation procedure.  The source IP
address of the packet would be the IP address of the
PDP or Bearer context.
          
This table represents various parameters set in the
route probe packet.  At this point, UDP packets will be
sent, a new column will be added to represent the
protocol when the support is extended to other
protocols.
cgprsAccPtRouteProbeEntry row .1.3.6.1.4.1.9.9.183.1.1.8.1.1
An entry in cgprsAccPtRouteProbeTable.
Indexes
No indexes recorded
Column Syntax OID
This object indicates the type of Internet address by
which cgprsAccPtRpDestAddr is reachable.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.8.1.1.1
This object specifies the destination IP address to
which the route probe packet needs to be sent.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.8.1.1.2
This objects specifies the protocol type of route probe
packet. This object can be set only after
cgprsAccPtRpDestAddr is being set.
Enumerationr/w
Enumerated Values:
1udp
2icmp
.1.3.6.1.4.1.9.9.183.1.1.8.1.1.3
This object specifies the destination port number of
the route probe packet when cgprsAccPtRpProtocol is
set to 'udp'. This object can be set only after
cgprsAccPtRpDestAddr is being set.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.9.183.1.1.8.1.1.4
This object specifies the TTL value set in the route
probe packet. This object can be set only after
cgprsAccPtRpDestAddr is being set.
secondsUnsigned32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.9.9.183.1.1.8.1.1.5
.1.3.6.1.4.1.9.9.183.1.1.9.1 · 1 row entry · 19 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtIpv6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtIpv6Table'
The Gateway supports IPv6 PDP or Bearer type and its user
traffic. It will provide the IPv6 prefix and interface
identifier to the MS; generate IPv6 PDP or Bearer address
in the appropriate charging records and AAA accounting record.
          
This table represents various parameters required to 
support IPv6 PDP or Bearer under APN.
cgprsAccPtIpv6Entry row .1.3.6.1.4.1.9.9.183.1.1.9.1.1
An entry in cgprsAccPtIpv6Table.

The agent can create/destroy/modify a profile as a
result of actions from the local console. The table
objects can be modified, when the RowStatus is active.

T…
Indexes
No indexes recorded
Column Syntax OID
This object specifies the base virtual template
for an APN. To create a sub-interface for each PDP or
Bearer, a base virtual-template needs to be configured so
that virtual-access interface can be cloned from it. Many …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.1
This object specifies the type of
cgprsAccPtIpv6DnsPriAddress and
cgprsAccPtIpv6DnsSecAddress.

DNS addresses to be sent to the MS can come from DHCP
server or RADIUS server based on IP address allocation…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.2
This object specifies the IPv6 address of the primary
DNS server that will be sent to MS.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.3
This object specifies the IPv6 address of the secondary
DNS server that will be sent to MS. This object can
be configured only after configuring the primary DNS
address(cgprsAccPtIpv6DnsPriAddress).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.4
This object specifies whether the APN supports
IPv6 PDP or Bearer.

The Gateway supports dual stack APN. Both IPv6 and IPv4 PDP
or Bearer can be created for the same APN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.5
This object specifies whether the APN supports only
IPv6 PDPs or Bearers.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.6
This object specifies the name of the access list
applied to all the traffic received by this APN from
the PDN, for forwarding towards a MS.
AccessControlListNamer/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.7
This object specifies the name of the access list
applied to all the traffic received by this APN from
a MS, for forwarding towards PDN.
AccessControlListNamer/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.8
This object specifies a dynamic address allocation
method followed by this access point.

- 'global', which indicates that no method is
defined specifically to this access point and the
DHCP or…
Enumerationr/w
Enumerated Values:
1global
2dhcp
3disable
4local
5radius
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.9
This object specifies the name of the local address
pool used when cgprsAccPtIpv6AddrPool is set to
'local'.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.10
This object specifies the traffic redirection in an
APN.

- 'none', indicates that, traffic will not be
redirected i.e., the traffic will get switched through
the Gateway without going through any Gi …
Enumerationr/w
Enumerated Values:
0none
1all
2intermobile
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.11
This object specifies the type of
cgprsAccPtIpv6RedirectAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.12
This object specifies the Internet address of the
device to which traffic will be re-directed.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.13
When this object is set to 'true', the Gateway will check the
upstream TPDU source address against the address
previously assigned to this user. If the addresses are
different, the TPDU is dropped. This check will enab…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.14
When this object is set to 'true', the Gateway will check the
upstream TPDU destination address against the range of
IP addresses reserved for PLMN devices. If there is a
match, the TPDU is dropped. This check would en…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.15
This object indicates the total number of IPv6
addresses currently allocated to user.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.16
The object indicates the interface index, of the
interface which is to be used for DHCPv6 request
multicasting.
CISCO-TCInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.17
This object indicates that whether DHCPv6 rapid-commit
feature is enabled for this APN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.18
This object represents the IPV6 DHCP
pool-name configured for this APN.
OctetStringr/w
Constraints:
range: 1-255
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.19
.1.3.6.1.4.1.9.9.183.1.1.10 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtCsgGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtCsgGroupTable'
This table contains the list of CSG Groups
configured on this APN.
cgprsAccPtCsgGroupEntry row .1.3.6.1.4.1.9.9.183.1.1.10.1
An Entry contains the CSG Group name configured
under the access point entry with index
cgprsAccPtIndex.
The agent can create/destroy a CSG group under
access point.
Column Syntax OID
This object specifies CSG Group name to use to
communicate with the CSG server in an access point
configuration.

The value must be same as an entry in cGgsnSACsgTable
identified by cGgsnSACsgGroupName.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.183.1.1.10.1.1
This object is used to create a new row or delete an
existing row in this table.
This object must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.

The value in any colum…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.183.1.1.10.1.2
.1.3.6.1.4.1.9.9.183.1.2.1 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtCfgNotifHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtCfgNotifHistTable'
This table contains a history of access point
configuration change notifications generated by 
the agent for changes in the access point 
configuration. 
          
The object cgprsAccPtCfgNotifHistMax specifies the 
maximum number of entries stored in this table. 
When the table is full, the oldest entries are 
discarded to make space for new entries.
cgprsAccPtCfgNotifHistEntry row .1.3.6.1.4.1.9.9.183.1.2.1.1
A description of a configuration change in the
cgprsAccPtTable. A configuration change is said
to occur if one of the following happens:

- An access point has been created. In this
case the object…
Column Syntax OID
An arbitrary non-zero integer value uniquely
identifying each notification previously sent
by the GPRS. This value increases monotonically
with each notification sent by the Gateway.

When it reaches the…
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.9.9.183.1.2.1.1.1
This object specifies the access point which has
been created, changed or modified.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.4.1.9.9.183.1.2.1.1.2
This object describes the reason of the notification.
Enumeration
Enumerated Values:
1modification
2creation
3deletion
.1.3.6.1.4.1.9.9.183.1.2.1.1.3
.1.3.6.1.4.1.9.9.183.1.3.1 · 1 row entry · 84 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtStatisticsTable'
This table contains the performance statistics of
each APN on this Gateway.
cgprsAccPtStatisticsEntry row .1.3.6.1.4.1.9.9.183.1.3.1.1
Entry for each APN in statistics table.
Indexes
No indexes recorded
Column Syntax OID
This object indicates the total number of PDP or Bearer
context activation procedures initiated by any MS on this APN.

Trigger Condition: This counter is triggered by create
PDP or Bearer request message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.1
This object indicates the total number of successfully
completed PDP or Bearer context activation procedures initiated
by MS on this APN.

Trigger Condition: This counter is triggered by create
PDP or Bear…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.2
This object indicates the total number of dynamic
PDP or Bearer context activation procedures initiated by the
MS on this APN. When a MS requests dynamic PDP or Bearer
address from the PLMN, a dynamic PDP or Bearer co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.3
This object indicates the total number of successfully
completed dynamic PDP or Bearer context activation procedures
initiated by MS on this APN.

Trigger Condition: This counter is triggered by a request…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.4
This object indicates the total number of PDP
or Bearer context deactivation procedures initiated by the
MS on this APN.

Trigger Condition: This counter is triggered by a request
message to delete PDP or…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.5
This object indicates the total number of
successfully completed PDP or Bearer context deactivation
procedures initiated by the MS.

Trigger Condition: This counter is triggered by a request
message to de…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.6
This object indicates the total number of network
initiated PDP or Bearer context activation procedures.

Trigger Condition: This counter is triggered by a request
message to create PDP or Bearer context.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.7
This object indicates the total number of
successfully completed network initiated PDP
or Bearer context activation procedures.

Trigger Condition: This counter is triggered by a request
message to create…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.8
This object indicates the total number of PDP
context deactivation procedures initiated by the
Gateway.

Trigger Condition: This counter is triggered by delete
PDP request message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.9
This object indicates the total number of
successfully completed PDP context deactivation
procedures initiated by the Gateway.

Trigger Condition: This counter is triggered by delete
PDP request message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.10
This object indicates the current number of active
PDP or Bearer contexts on this APN.

Trigger Condition: This counter is incremented/
decremented by a request message to create/delete
PDP or Bearer conte…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.11
This object indicates the total payload volume in
upstream traffic. Data flow from MS to PDN is
considered to be upstream traffic.

This object is deprecated by
cgprsAccPtRevUpstreamTrafficVol.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.12
This object indicates the total payload volume in
downstream traffic. Data flow from PDN to MS is
considered as downstream traffic.

This object is deprecated by
cgprsAccPtRevDownstrTrafficVol.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.13
This object indicates the total number of upstream
TPDU's that have been dropped due to source address
violation as specified by
cgprsAccPtVerifyUpStrTpduSrcAddr.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.14
This object indicates the total number of upstream
TPDU's that have been dropped due to destination
address violation as specified by
cgprsAccPtVerifyUpStrTpduDstAddr.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.15
This object represents the total number of packets,
pertaining to inter mobile communication, that have
been redirected to device specified by
cgprsAccPtRedirInterMobilAddr.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.16
This object indicates the total payload volume in
upstream traffic. Data flow from MS to PDN is
considered to be upstream traffic.

Trigger Condition: This counter is triggered when
upstream traffic is be…
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.183.1.3.1.1.17
This object indicates the total payload volume in
downstream traffic. Data flow from PDN to MS is
considered as downstream traffic.

Trigger Condition: This counter is triggered when
downstream traffic is…
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.183.1.3.1.1.18
This object represents the total number of upstream
packets sent on this APN. Data flow from MS to PDN is
considered to be upstream traffic.

Trigger Condition: This counter is triggered when
upstream tra…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.19
This object represents the total number of downstream
packets sent on this APN. Data flow from PDN to MS is
considered to be downstream traffic.

Trigger Condition: This counter is triggered when
downstre…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.20
This object represents the total number of DHCP
address request sent by the Gateway on this APN.

Trigger Condition: This counter is triggered by create
PDP or Bearer request message.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.21
This object represents the total number of successful
DHCP address request sent by the Gateway on this APN.

Trigger Condition: This counter is triggered by create
PDP or Bearer request message.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.22
This object represents the total number of DHCP
address release request sent by the Gateway on this APN.

Trigger Condition: This counter is triggered by delete
PDP or Bearer request message.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.23
This object indicates the total number of IPv6 PDP
or Bearer context activation procedures initiated by any MS on
this APN.

Trigger Condition: This counter is triggered by a request
message to create PDP …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.24
This object indicates the total number of successfully
completed IPv6 PDP or Bearer context activation procedures
initiated by MS on this APN.

Trigger Condition: This counter is triggered by create
PDP o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.25
This object indicates the total number of IPv6 PDP
or Bearer context deactivation procedures initiated by network.

Trigger Condition: This counter is triggered by delete
PDP or Bearer request message by …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.26
This object indicates the total number of
successfully completed IPv6 PDP or Bearer context deactivation
procedures initiated by the network on this APN.

Trigger Condition: This counter is triggered by de…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.27
This object indicates the total number of dynamic IPv6
PDP or Bearer context activation procedures initiated by the MS
on this APN. When a MS requests dynamic PDP or Bearer address
from the PLMN, a dynamic PDP or Bear…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.28
This object indicates the total number of successfully
completed dynamic IPv6 PDP or Bearer context activation
procedures initiated by MS on this APN.

Trigger Condition: This counter is triggered by creat…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.29
This object indicates the total number of IPv6 PDP
or Bearer context deactivation procedures initiated by the
MS on this APN.

Trigger Condition: This counter is triggered by delete
PDP or Bearer request m…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.30
This object indicates the total number of
successfully completed IPv6 PDP or Bearer context deactivation
procedures initiated by the MS on this APN.

Trigger Condition: This counter is triggered by delete
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.31
This object indicates the total number of IPv6 PDP
context deactivation procedures initiated by the
Gateway on this APN.

Trigger Condition: This counter is triggered by delete
PDP request message, sent by…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.32
This object indicates the total number of
successfully completed IPv6 PDP context deactivation
procedures initiated by the Gateway on this APN.

Trigger Condition: This counter is triggered by delete
PDP r…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.33
This object indicates the total payload volume in
upstream traffic sent on this APN. Data flow from
MS to PDN is considered to be upstream traffic.

Trigger Condition: This counter is triggered when
upst…
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.183.1.3.1.1.34
This object indicates the total payload volume in
downstream traffic sent on this APN. Data flow from
PDN to MS is considered as downstream traffic.

Trigger Condition: This counter is triggered when
dow…
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.183.1.3.1.1.35
This object indicates the total number of upstream
packets sent on this APN. Data flow from MS to PDN is
considered to be upstream traffic.

Trigger Condition: This counter is triggered when
upstream traf…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.36
This object represents the total number of downstream
packets sent on this APN. Data flow from PDN to MS is
considered to be downstream traffic.

Trigger Condition: This counter is triggered when
downstre…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.37
This object represents the total number of PDP
or Bearer context update requests sent on this APN.

Trigger Condition: This counter is triggered when a
PDP or Bearer context update request is initiated.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.38
This object represents the total number of successful
PDP or Bearer context update responses received with a cause
value 'Request accepted' for the initiated update
requests on this APN.

Trigger condition…
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.39
This object represents the total number of Change of
Authorization (COA) messages received on this APN.
Trigger condition: This counter is triggered when a COA
message is received.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.40
This object represents the number of COA messages
that were acknowledged by the Gateway with a COA ACK.

Trigger condition: This counter is triggered when a
COA ACK is sent by the Gateway.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.41
This object represents the number of times Direct
tunnel is enabled for the PDP contexts on this APN
in Gateway.
pdpsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.42
This object indicates the total number of Bearers
in this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.43
This object indicates the total number of Bearer
creation initiated by MME, SGSN or MS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.44
This object indicates the total number of successful
Bearer creation initiated by MME, SGSN or MS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.45
This object indicates the total number of Bearer
delete initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.46
This object indicates the total number of Bearer
modify initiated by MME or SGSN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.47
This object indicates the total number of successful
Bearer modify initiated by MME or SGSN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.48
This object indicates the total number of Bearer
update initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.49
This object indicates the total number of successful
Bearer update initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.50
This object indicates the total number of dedicated
Bearer creation initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.51
This object indicates the total number of successful
dedicated Bearer creation initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.52
This object indicates the total number of IPv6
dedicated Bearer creation initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.53
This object indicates the total number of IPv6
dedicated Bearer creation initiated by network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.54
This object indicates the total number of IPv4v6 PDP
or Bearer context activation procedures initiated by any MS on
this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.55
This object indicates the total number of successfully
completed IPv4v6 PDP or Bearer context activation procedures
initiated by MS on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.56
This object indicates the total number of IPv4v6 PDP
or Bearer context deactivation procedures initiated by the
MS on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.57
This object indicates the total number of
successfully completed IPv4v6 PDP or Bearer context
deactivation procedures initiated by the MS on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.58
This object indicates the total number of IPv4v6, dedicated
Bearer activations that were initiated by the PGW on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.59
This object indicates the total number of IPv4v6 dedicated
Bearers that were successfully activated by the PGW.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.60
This object represents the number of DHCP Discover messages
received by the Gateway.

The UE sends this message upon bootup/lease rebinding timer
expiry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.61
This object represents the number of DHCP request messages
received by the Gateway.

The UE may send the DHCP-Request message with
Requested-IP-Address option in one of the many following
scenarios:
UE is…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.62
This object represents the number of DHCP decline messages
received by the Gateway from UE.

The UE may send this message when the IP-address it received is
found to be already in use by another device.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.63
This object represents the number DHCP - Release messages
received
by the Gateway.

The User Equipment may send this message when the IPv4-session
is terminated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.64
This object represents the number of DHCP offer messages sent
by the Gateway.
The Gateway sends this message on allocating a Requested IP
address to the User equipment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.65
This object represents the number of DHCP Acknowledge messages
sent by the Gateway.
The Gateway sends this message to the User equipment in response
to a DHCP-Request message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.66
This object represents the number of DHCP-Negative-Acknowledge
messages sent by the Gateway.

The Gateway sends DHCP-Negative acknowledge message to the User
Equipment in the following cases:
If the DHCP…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.67
This object represents the number of DHCP-Inform message sent
by the Gateway.
The Gateway shall respond with a DHCP-Acknowledge to the
DHCP-Inform message sent by the UE
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.68
This object represents the number of DHCP-Unknown messages
received by the Gateway.
DHCP-Control messages, with unknown format are specified as
DHCP-uknown message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.69
This object represents the number of times the Gateway has
retried to establish a connection with the Proxy server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.70
This object represents the number of times a DHCP proxy server
control message is dropped by the Gateway due to some error in
the message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.71
This object indicates the current number of active
Bearer on this APN.
bearersSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.72
This object represents the number of times an outgoing DHCP
proxy server control message is dropped by the Gateway due to
some failure in the Gateway.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.73
This object represents the number of times an incoming DHCP
proxy server control message has been dropped by the Gateway
due to IP allocation error in the message.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.74
This object represents the total number dedicated bearer
deactivation request initiated by the Gateway.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.75
This object represents the total number of dedicated bearer
modification request with QoS change initiated by the Gateway.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.76
This object represents the total number of successful
dedicated bearer modification request with QoS change
initiated by the Gateway.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.77
This object represents the total number of dedicated bearer
modification request without QoS change initiated by the
Gateway.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.78
This object represents the total number of successful
dedicated bearer modification request without QoS change
initiated by the Gateway.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.79
This object indicates the total number of IPv4v6 PDP
or Bearer context activation procedures initiated by any MS on
this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.80
This object indicates the total number of successfully
completed IPv4v6 PDP or Bearer context activation procedures
initiated by MS on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.81
This object indicates the total number of failed PDP or Bearer
context activation procedures initiated by MS on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.82
This object represents the total number of failed PDP or Bearer
context update for the initiated update requests on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.83
This object represents the total number of failed PDP or
Bearer context update response not received due to the time out
for the initiated update requests on this APN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.1.1.84
.1.3.6.1.4.1.9.9.183.1.3.2 · 1 row entry · 9 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtDhcpv6ProxyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtDhcpv6ProxyStatsTable'
This table contains the DHCPv6 proxy server
performance statistics for each APN on this Gateway.
cgprsAccPtDhcpv6ProxyStatsEntry row .1.3.6.1.4.1.9.9.183.1.3.2.1
There is an entry in this table for each APN in
the Gateway.
Indexes
No indexes recorded
Column Syntax OID
This object represents the total number of DHCPv6
information request message handled by the Gateway's
DHCPv6 proxy-client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.1
This object represents the total number of DHCPv6 response
message sent by the Gateway's DHCPv6 proxy-client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.2
This object represents the total number of times a local
response was sent for the DHCPv6 information request received
by the Gateway's DHCPv6 proxy-client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.3
This object represents the total number of times DHCPv6
IP allocation was successful.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.4
This object represents the total number of times DHCPv6
IP allocation was failed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.5
This object represents the total number of times an allocated
DHCPv6 IP was released.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.6
This object represents the total number of times an allocated
DHCPv6 IP renewal was failed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.7
This object represents the total number of times an unknown
message was handled by the Gateway's DHCPv6 proxy-client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.8
This object represents the total number of times an error
has occurred at the Gateway's DHCPv6 proxy-client.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.2.1.9
.1.3.6.1.4.1.9.9.183.1.3.3 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cgprsAccPtThruputStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GPRS-ACC-PT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GPRS-ACC-PT-MIB::cgprsAccPtThruputStatsTable'
This table contains the throughput statistics of
each APN on this Gateway.
cgprsAccPtThruputStatsEntry row .1.3.6.1.4.1.9.9.183.1.3.3.1
An entry in this table.
Column Syntax OID
This object represents the time interval at which the
statistics are sampled. Interval configuration is out
of the scope of the MIB and are covered in
CISCO-GGSN-MIB.
minutesInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.9.9.183.1.3.3.1.1
This object represents the delta value between the time
when this data is collected and the time it is been
retrieved.
minutesInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.183.1.3.3.1.2
This object represents the total payload volume in
upstream traffic sent on this APN in the last sampling
period specified by cgprsAccPtThruputInterval.
bytesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.3.1.3
This object represents the total payload volume in
downstream traffic sent on this APN in the last sampling
period specified by cgprsAccPtThruputInterval.
bytesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.3.1.4
This object represents the number of upstream packets
sent on this APN in the last sampling period specified
by cgprsAccPtThruputInterval.
packetsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.3.1.5
This object represents the number of downstream packets
sent on this APN in the last sampling period specified
by cgprsAccPtThruputInterval.
packetsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.183.1.3.3.1.6