CISCO-GGSN-MIB Table View

This table has the statistics of the interface (Gi, Gn, Gp)
upstream and downstream traffic per SGSN for a 
configurable duration set in cGgsnThruputIntervalOne and
cGgsnThruputIntervalTwo.
          
Creation of row(s) will happen when there is a valid value set 
to cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo and
when a PATH is established.
          
Deletion of row(s) will happen when either the PATH gets
removed or the throughput intervals(cGgsnThruputIntervalOne,
cGgsnThruputIntervalTwo) is unset.

cGgsnSgsnStatEntry row .1.3.6.1.4.1.9.9.240.1.1.26.1

An entry in this table.

Indexes

CISCO-GTP-MIBcGtpPathAddressType CISCO-GTP-MIBcGtpPathAddress CISCO-GTP-MIBcGtpPathPort cGgsnSgsnThruPutInterval

Column	Syntax	OID
cGgsnSgsnThruPutInterval This object should be one of the values set in the objects cGgsnThruputIntervalOne or cGgsnThruputIntervalTwo except for value '0', which means the throughput collection is disabled.	minutesInteger32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.240.1.1.26.1.1
cGgsnSgsnThruPutLastCollected This object represents the delta value between the time when this data is collected and the time it is been retrieved.	minutesInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.240.1.1.26.1.2
cGgsnSgsnUpStreamPktCnt This object represents the total number of upstream packets sent on this SGSN data path. Data flow from MS to PDN is considered to be upstream traffic. When the throughput intervals (cGgsnThruputIntervalO…	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.240.1.1.26.1.3
cGgsnSgsnUpStreamByteCnt This object represents the total number of upstream bytes sent on this SGSN data path. Data flow from MS to PDN is considered to be upstream traffic. When the throughput intervals (cGgsnThruputIntervalOne…	bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.240.1.1.26.1.4
cGgsnSgsnDownStreamPktCnt This object represents the total number of downstream packets sent on this SGSN data path. Data flow from PDN to MS is considered to be downstream traffic. When the throughput interval (cGgsnThruputInterv…	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.240.1.1.26.1.5
cGgsnSgsnDownStreamByteCnt This object represents the total number of downstream bytes sent on this SGSN data path. Data flow from PDN to MS is considered to be downstream traffic. When the throughput interval (cGgsnThruputInterval…	bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.240.1.1.26.1.6

A history table of the most recent cGgsnNotification
notifications generated by this device.
If a new cGgsnNotification notification is generated when
the number of entries is equal to cGgsnHistNotifMaxLength,
then the oldest entry is deleted and replaced with an entry
for the latest notification.

cGgsnHistNotifEntry row .1.3.6.1.4.1.9.9.240.1.2.7.1

Detailed information concerning a particular notification
that previously generated from this device.

Indexes

cGgsnHistNotifIndex

Column	Syntax	OID
cGgsnHistNotifIndex A monotonically increasing integer for the sole purpose of indexing notifications. When it reaches the maximum value, it wraps the value back to 1.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.240.1.2.7.1.1
cGgsnHistNotifType This object indicates the type of notification.	Enumeration Enumerated Values: 1 ggsnServiceUp 2 ggsnServiceDown 3 mapSgsnUp 4 mapSgsnDown 5 noResource 6 noRADIUS 7 noDHCPServer 8 ipAllocationFail 9 authenticationFail 10 apnUnreachable	.1.3.6.1.4.1.9.9.240.1.2.7.1.2
cGgsnHistNotifSeverity This object indicates the severity level of the notification. This object cannot be set to cleared(1) or indeterminate(2).	CISCO-TCCiscoAlarmSeverity Type Values: 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning 7 info	.1.3.6.1.4.1.9.9.240.1.2.7.1.3
cGgsnHistNotifTimestamp This object indicates the value of sysUpTime when this notification was generated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.240.1.2.7.1.4
cGgsnHistNotifGgsnIpAddrType This object indicates the type of Internet address by which cGgsnHistNotifGgsnIpAddr is reachable.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.2.7.1.5
cGgsnHistNotifGgsnIpAddr The object indicates the IP address that uniquely identifies the device which generated the notification.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.240.1.2.7.1.6
cGgsnHistNotifInfo A textual description of cGgsnHistNotifType, which potentially contains additional information (more than just the type of alarm). If the text of the message exceeds 64 bytes, the message will be truncated to 63 bytes a…	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.240.1.2.7.1.7

This table contains the range of IP address used in the
GPRS PLMN. These IP addresses are used to avoid IP address 
duplication in GPRS network. IP address duplication occurs 
when a MS uses an IP address which is already used in the PLMN.
The IP addresses configured inside GPRS network should be in 
these ranges and MS IP address should not be in this range.

cGgsnIpDupProtectEntry row .1.3.6.1.4.1.9.9.240.1.3.3.1

Entry containing the start and end IP address in the address
range. An Entry with start IP > end IP is not allowed.
No new entry will be accepted if that would cause any IP
address(es) to be represented by more than one…

Indexes

cGgsnMsExcludeRangeStartIpType cGgsnMsExcludeRangeStartIp cGgsnMsExcludeRangeEndIpType cGgsnMsExcludeRangeEndIp

Column	Syntax	OID
cGgsnMsExcludeRangeStartIpType The type of Internet address by which cGgsnMsExcludeRangeStartIp is reachable. The value of this object should be same as cGgsnMsExcludeRangeEndIpType.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.3.1.1
cGgsnMsExcludeRangeStartIp Starting IP address in the address range.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.3.1.2
cGgsnMsExcludeRangeEndIpType The type of Internet address by which cGgsnMsExcludeRangeEndIp is reachable. The value of this object should be same as cGgsnMsExcludeRangeStartIpType.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.3.1.3
cGgsnMsExcludeRangeEndIp Ending IP address in the address range.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.3.1.4
cGgsnIpDupProtectRowStatus This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo' and the objects cGgsnMsExcludeRangeStartIpv6Prefixlen and cGgsnMsExcludeR…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.240.1.3.3.1.5
cGgsnMsExcludeRangeStartIpv6Prefixlen This object represents the IPv6 prefix length supplied for the cGgsnMsExcludeRangeStartIp.The value of this object will be zero when cGgsnMsExcludeRangeStartIpType is IPv4.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.240.1.3.3.1.6
cGgsnMsExcludeRangeEndIpv6Prefixlen This object represents the IPv6 prefix length supplied for the cGgsnMsExcludeRangeEndIp.The value of this object will be zero when cGgsnMsExcludeRangeEndIpType is IPv4.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.240.1.3.3.1.7

This table contains the list of default aggregate routes
configured on the GGSN. GGSN uses a static host route to 
forward user data packets for each PDP context received 
from Gi interface to Gn interface. Using the aggregate 
route (address range), the total number of static routes 
implemented in the GGSN for PDP requests can be greatly 
reduced.

cGgsnDefaultAggregEntry row .1.3.6.1.4.1.9.9.240.1.3.4.1

An Entry contains the IP network prefix which is used to
combine the routes of PDP requests for the same network as
a single route on the GGSN.

Indexes

cGgsnDefaultAggregIpAddrType cGgsnDefaultAggregIpAddr cGgsnDefaultAggregIpMask

Column	Syntax	OID
cGgsnDefaultAggregIpAddrType This object specifies the type of Internet address denoted by cGgsnDefaultAggregIpAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.4.1.1
cGgsnDefaultAggregIpAddr This object specifies the IP address whose network prefix is going to be defined by cGgsnDefaultAggregIpMask.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.4.1.2
cGgsnDefaultAggregIpMask This object specifies the net-mask pertaining to cGgsnDefaultAggregIpAddr.	CISCO-TCCiscoInetAddressMask Type Constraints: range: 0..128	.1.3.6.1.4.1.9.9.240.1.3.4.1.3
cGgsnDefaultAggregRowStatus This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. The values 'createAndWait…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.240.1.3.4.1.4

This table contains the range of IP addresses that belong
to the PLMN nodes in a GPRS network. This range does not 
include address of various entities like RADIUS, DHCP, DNS 
servers, etc., which are not part of PLMN.

cGgsnPlmnIpAddrRangeEntry row .1.3.6.1.4.1.9.9.240.1.3.9.1

Entry containing the first and last IP address in the address
range. An Entry with first-IP > last-IP is not allowed. No
new entry will be accepted if that would cause any IP
address(es) to be represented by more than…

Indexes

cGgsnPlmnAddrRangeIpAddrType cGgsnPlmnAddrRangeFirstIp cGgsnPlmnAddrRangeLastIp

Column	Syntax	OID
cGgsnPlmnAddrRangeIpAddrType The address type for cGgsnPlmnAddrRangeFirstIp and cGgsnPlmnAddrRangeLastIp addresses.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.9.1.1
cGgsnPlmnAddrRangeFirstIp First IP address in the address range.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.9.1.2
cGgsnPlmnAddrRangeLastIp Last IP address in the address range.	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.9.1.3
cGgsnPlmnAddrRangeRowStatus This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo' and the objects cGgsnPlmnAddrRangeFirstIpv6Prefixlen and cGgsnPlmnAddrRan…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.240.1.3.9.1.4
cGgsnPlmnAddrRangeUsage This object specifies how the address range will be used by the GGSN. When set to 'security', the address range is used for GGSN security feature i.e. any TPDU with destination address that falls in thi…	Enumerationr/w Enumerated Values: 1 security 2 sgsn	.1.3.6.1.4.1.9.9.240.1.3.9.1.5
cGgsnPlmnAddrRangeFirstIpv6Prefixlen This object represents the IPv6 prefix length supplied for the cGgsnPlmnAddrRangeFirstIp .The value of this object will be zero when cGgsnPlmnAddrRangeFirstIpType is IPv4.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.240.1.3.9.1.6
cGgsnPlmnAddrRangeLastIpv6Prefixlen This object represents the IPv6 prefix length supplied for the cGgsnPlmnAddrRangeLastIp .The value of this object will be zero when cGgsnPlmnAddrRangeLastIpType is IPv4.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.240.1.3.9.1.7

This table contains the entries of P-CSCF groups with the
addresses configured. One or more IP address can be
configured per group name. This group in turn will be mapped
to the APN.
          
P-CSCF is a network element providing session management
services. When the UE request the GGSN for P-CSCF 
address through activate PDP Request, these addresses
will be returned to the UE in the order which they are
configured.

cGgsnPcscfEntry row .1.3.6.1.4.1.9.9.240.1.3.10.2.1

An entry is created when the user configures the
group name and an IP address is set.

Indexes

cGgsnPcscfGroupName cGgsnPcscfIpAddressType cGgsnPcscfIpAddress

Column	Syntax	OID
cGgsnPcscfGroupName This group name is the identifier for the P-CSCF addresses configured.	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.9.9.240.1.3.10.2.1.1
cGgsnPcscfIpAddressType This object specifies the type of the P-CSCF IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.10.2.1.2
cGgsnPcscfIpAddress This object specifies the IP address of the P-CSCF. The type of this address is specified by the object cGgsnPcscfIpAddressType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.240.1.3.10.2.1.3
cGgsnPcscfRowStatus This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo(4)'. To delete a row, set this object to 'destroy(6)'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.240.1.3.10.2.1.4

Mobile Country Code (MCC) and Mobile Network Code (MNC)
together identify a GPRS PLMN of an operator. PLMN Ids
other than home PLMNs are considered as foreign. There
will be some situations where some foreign PLMNs has to
be treated as trusted PLMNs. 
          
This table contains the list of PLMNs, there can be one
home PLMN entry and multiple trusted PLMN entry.

cGgsnPlmnEntry row .1.3.6.1.4.1.9.9.240.1.3.13.1

Entry containing list of home PLMN Ids and the Trusted
PLMN Ids.

Indexes

cGgsnPlmnMcc cGgsnPlmnMnc

Column	Syntax	OID
cGgsnPlmnMcc The Mobile Country Code (MCC) is part of the PLMN Id.	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.9.9.240.1.3.13.1.1
cGgsnPlmnMnc The Mobile Network Code (MNC) is part of the PLMN Id.	OctetString Constraints: range: 2-3	.1.3.6.1.4.1.9.9.240.1.3.13.1.2
cGgsnPlmnRowStatus This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. To modify a row, the row …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.240.1.3.13.1.3
cGgsnPlmnScope This object specifies whether the PLMN is home or trusted. Only one PLMN entry can be home	Enumerationr/w Enumerated Values: 1 home 2 trusted	.1.3.6.1.4.1.9.9.240.1.3.13.1.4

This table includes the different virtual servers
(IP address of virtual servers) and the
elements gives the interface to reach these servers.
          
The table is indexed on the vserver address.
          
The table objects can be modified, when the RowStatus
 (cGgsnSlbVserRowStatus) is active.

cGgsnSlbVserverEntry row .1.3.6.1.4.1.9.9.240.1.3.23.1

Entry contains the Virtual server details(IP address type,
IP address)and next hop address and VRF name.

Indexes

cGgsnSlbVserAddrType cGgsnSlbVserAddress

Column	Syntax	OID
cGgsnSlbVserAddrType This object specifies the address type of the vserver.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.23.1.1
cGgsnSlbVserAddress This object specifies the address of GTP vservers. It is required only in directed mode. If SLB is running in directed mode and this object is not configured, then the feature remains disabled. If SLB is …	OctetString Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.23.1.2
cGgsnSlbVserNextHopAddrType This object specifies the IP address type to reach the virtual server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.240.1.3.23.1.3
cGgsnSlbVserNextHopAddress This object specifies the IP address to reach the vserver.	OctetStringr/w Constraints: range: 4-20	.1.3.6.1.4.1.9.9.240.1.3.23.1.4
cGgsnSlbVserVrfName This object specifies the VRF name on an interface on GGSN connected to SLB, to reach the vserver.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.240.1.3.23.1.5
cGgsnSlbVserRowStatus This object will create new row into the table or deletes the existing one. To create a row, set this object to 'createAndGo(4)'. To delete a row, set this object to 'destroy(6)'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.240.1.3.23.1.6

This table contains information about ifIndex of the
interfaces on which gtp encapsulation is configured.

cGgsnGtpEncapsuEntry row .1.3.6.1.4.1.9.9.240.1.4.16.1

The cGgsnGtpEncapsuEntry represents the ifIndex of the
interface on which gtp encapsulation is configured.
Only one interface can be configured with gtp
encapsulation on the GGSN. Entry in the table created whenever
int…

Indexes

IF-MIBifIndex

Column	Syntax	OID
cGgsnGtpEncapsuInterface This object represents the ifIndex of the interface on which gtp encapsulation is configured. Only one interface can be configured with gtp encapsulation on the GGSN. A zero value indicates that no interface is configur…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.240.1.4.16.1.1