CISCO-FLASH-MIB Table View

Table of Flash device properties for each initialized
Flash device. Each Flash device installed in a system
is detected, sized, and initialized when the system
image boots up.
For removable Flash devices, the device properties
will be dynamically deleted and recreated as the
device is removed and inserted. Note that in this
case, the newly inserted device may not be the same as
the earlier removed one. The ciscoFlashDeviceInitTime
object is available for a management station to determine
the time at which a device was initialized, and thereby
detect the change of a removable device.
A removable device that has not been installed will
also have an entry in this table. This is to let a
management station know about a removable device that
has been removed. Since a removed device obviously
cannot be sized and initialized, the table entry for
such a device will have
ciscoFlashDeviceSize equal to zero,
and the following objects will have
an indeterminate value:
        ciscoFlashDeviceMinPartitionSize,
        ciscoFlashDeviceMaxPartitions,
        ciscoFlashDevicePartitions, and
        ciscoFlashDeviceChipCount.
ciscoFlashDeviceRemovable will be
true to indicate it is removable.

ciscoFlashDeviceEntry row .1.3.6.1.4.1.9.9.10.1.1.2.1

An entry in the table of flash device properties for
each initialized flash device.
Each entry can be randomly accessed by using
ciscoFlashDeviceIndex as an index into the table.
Note that removable devices will have an…

Indexes

ciscoFlashDeviceIndex

Column	Syntax	OID
ciscoFlashDeviceIndex Flash device sequence number to index within the table of initialized flash devices. The lowest value should be 1. The highest should be less than or equal to the value of the ciscoFlashDevicesSupported object.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.2.1.1
ciscoFlashDeviceSize Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater than the maximum value reportable by this obj…	bytesUnsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.2.1.2
ciscoFlashDeviceMinPartitionSize This object will give the minimum partition size supported for this device. For systems that execute code directly out of Flash, the minimum partition size needs to be the bank size. (Bank size is equal to the size of a…	bytesUnsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.2.1.3
ciscoFlashDeviceMaxPartitions Max number of partitions supported by the system for this Flash device. Default will be 1, which actually means that partitioning is not supported. Note that this value will be defined by system limitations, not by the …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.2.1.4
ciscoFlashDevicePartitions Flash device partitions actually present. Number of partitions cannot exceed the minimum of ciscoFlashDeviceMaxPartitions and (ciscoFlashDeviceSize / ciscoFlashDeviceMinPartitionSize). Will be equal to at least 1, the c…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.2.1.5
ciscoFlashDeviceChipCount Total number of chips within the Flash device. The purpose of this object is to provide information upfront to a management station on how much chip info to expect and possibly help double check the chip index against a…	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.9.9.10.1.1.2.1.6
ciscoFlashDeviceNamedeprecated Flash device name. This name is used to refer to the device within the system. Flash operations get directed to a device based on this name. The system has a concept of a default device. This would be the primary or mos…	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.9.9.10.1.1.2.1.7
ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. …	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.10.1.1.2.1.8
ciscoFlashDeviceController Flash device controller. The h/w card that actually controls Flash read/write/erase. Relevant for the AGS+ systems where Flash may be controlled by the MC+, STR or the ENVM cards, cards that may not actually contain the…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.10.1.1.2.1.9
ciscoFlashDeviceCarddeprecated This object will point to an instance of a card entry in the cardTable. The card entry will give details about the card on which the Flash device is actually located. For most systems, this is usually the main processor…	SNMPv2-TCInstancePointer Description: A pointer to either a specific instance of a MIB object or a conceptual row of a MIB table in the managed device. In the latter case, by convention, it is the name of the particular instance of the first accessible col…	.1.3.6.1.4.1.9.9.10.1.1.2.1.10
ciscoFlashDeviceProgrammingJumper This object gives the state of a jumper (if present and can be determined) that controls the programming voltage called Vpp to the Flash device. Vpp is required for programming (erasing and writing) Flash. For certain o…	Enumeration Enumerated Values: 1 installed 2 notInstalled 3 unknown	.1.3.6.1.4.1.9.9.10.1.1.2.1.11
ciscoFlashDeviceInitTime System time at which device was initialized. For fixed devices, this will be the system time at boot up. For removable devices, it will be the time at which the device was inserted, which may be boot up time, or a later…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.10.1.1.2.1.12
ciscoFlashDeviceRemovable Whether Flash device is removable. Generally, only PCMCIA Flash cards will be treated as removable. Socketed Flash chips and Flash SIMM modules will not be treated as removable. Simply put, only those Flash devices that…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.10.1.1.2.1.13
ciscoFlashPhyEntIndex This object indicates the physical entity index of a physical entity in entPhysicalTable which the flash device actually located.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.10.1.1.2.1.14
ciscoFlashDeviceNameExtended Extended Flash device name whose size can be upto 255 characters. This name is used to refer to the device within the system. Flash operations get directed to a device based on this name. The system has a concept of a d…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.10.1.1.2.1.15
ciscoFlashDeviceSizeExtended Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDeviceSize.	bytesHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.10.1.1.2.1.16
ciscoFlashDeviceMinPartitionSizeExtended This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.10.1.1.2.1.17

Table of Flash device chip properties for each
initialized Flash device.
This table is meant primarily for aiding error
diagnosis.

ciscoFlashChipEntry row .1.3.6.1.4.1.9.9.10.1.1.3.1.1

An entry in the table of chip info for each
flash device initialized in the system.
An entry is indexed by two objects - the
device index and the chip index within that
device.

Indexes

ciscoFlashDeviceIndex ciscoFlashChipIndex

Column	Syntax	OID
ciscoFlashChipIndex Chip sequence number within selected flash device. Used to index within chip info table. Value starts from 1 and should not be greater than ciscoFlashDeviceChipCount for that device. When retrieving chip information for…	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.1
ciscoFlashChipCode Manufacturer and device code for a chip. Lower byte will contain the device code. Upper byte will contain the manufacturer code. If a chip code is unknown because it could not be queried out of the chip, the value of th…	OctetString Constraints: range: 0-5	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.2
ciscoFlashChipDescr Flash chip name corresponding to the chip code. The name will contain the manufacturer and the chip type. It will be of the form : Intel 27F008SA. In the case where a chip code is unknown, this object will be an empty…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.3
ciscoFlashChipWriteRetries This object will provide a cumulative count (since last system boot up or initialization) of the number of write retries that were done in the chip. If no writes have been done to Flash, the count will be zero. Typicall…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.4
ciscoFlashChipEraseRetries This object will provide a cumulative count (since last system boot up or initialization) of the number of erase retries that were done in the chip. Typically, a maximum of 2000 retries are done in a single erase zone (…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.5
ciscoFlashChipMaxWriteRetries The maximum number of write retries done at any single location before declaring a write failure.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.6
ciscoFlashChipMaxEraseRetries The maximum number of erase retries done within an erase sector before declaring an erase failure.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.3.1.1.7

Table of flash device partition properties for each
initialized flash partition. Whenever there is no
explicit partitioning done, a single partition spanning
the entire device will be assumed to exist. There will
therefore always be atleast one partition on a device.

ciscoFlashPartitionEntry row .1.3.6.1.4.1.9.9.10.1.1.4.1.1

An entry in the table of flash partition properties
for each initialized flash partition. Each entry
will be indexed by a device number and a partition
number within the device.

Indexes

ciscoFlashDeviceIndex ciscoFlashPartitionIndex

Column	Syntax	OID
ciscoFlashPartitionIndex Flash partition sequence number used to index within table of initialized flash partitions.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.1
ciscoFlashPartitionStartChip Chip sequence number of first chip in partition. Used as an index into the chip table.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.2
ciscoFlashPartitionEndChip Chip sequence number of last chip in partition. Used as an index into the chip table.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.3
ciscoFlashPartitionSize Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size will be equal to ciscoFlashDeviceSize. If the size of the flash parti…	bytesUnsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.4
ciscoFlashPartitionFreeSpace Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the file system's file header. Certain file systems may also have a partition or device header …	bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.5
ciscoFlashPartitionFileCount Count of all files in a flash partition. Both good and bad (deleted or invalid checksum) files will be included in this count.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.6
ciscoFlashPartitionChecksumAlgorithm Checksum algorithm identifier for checksum method used by the file system. Normally, this would be fixed for a particular file system. When a file system writes a file to Flash, it checksums the data written. The checks…	Enumeration Enumerated Values: 1 simpleChecksum 2 undefined 3 simpleCRC	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.7
ciscoFlashPartitionStatus Flash partition status can be : * readOnly if device is not programmable either because chips could not be recognized or an erroneous mismatch of chips was detected. Chip recognition may fail either becau…	Enumeration Enumerated Values: 1 readOnly 2 runFromFlash 3 readWrite	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.8
ciscoFlashPartitionUpgradeMethod Flash partition upgrade method, ie., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on run-from-Flash systems for upgrading Flash. This feature uses …	Enumeration Enumerated Values: 1 unknown 2 rxbootFLH 3 direct	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.9
ciscoFlashPartitionName Flash partition name used to refer to a partition by the system. This can be any alpha-numeric character string of the form AAAAAAAAnn, where A represents an optional alpha character and n a numeric character. Any numer…	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.10
ciscoFlashPartitionNeedErasure This object indicates whether a partition requires erasure before any write operations can be done in it. A management station should therefore retrieve this object prior to attempting any write operation. A partition r…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.11
ciscoFlashPartitionFileNameLength Maximum file name length supported by the file system. Max file name length will depend on the file system implemented. Today, all file systems support a max length of at least 48 bytes. A management entity must use thi…	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.12
ciscoFlashPartitionSizeExtended Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size will be equal to ciscoFlashDeviceSize. This object is a 64-bit versio…	bytesHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.13
ciscoFlashPartitionFreeSpaceExtended Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the file system's file header. Certain file systems may also have a partition or device header …	bytesHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.14
ciscoFlashPartitionLowSpaceNotifThreshold This object specifies the minimum threshold value in percentage of free space for each partition. If the free space available goes below this threshold value and if ciscoFlashPartionLowSpaceNotifEnable is set to true, c…	CISCO-QOS-PIB-MIBPercentr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.9.9.10.1.1.4.1.1.15

Table of information for files in a Flash partition.

ciscoFlashFileEntry row .1.3.6.1.4.1.9.9.10.1.1.4.2.1.1

An entry in the table of Flash file properties
for each initialized Flash partition. Each entry
represents a file and gives details about the file.
An entry is indexed using the device number,
partition number within th…

Indexes

ciscoFlashDeviceIndex ciscoFlashPartitionIndex ciscoFlashFileIndex

Column	Syntax	OID
ciscoFlashFileIndex Flash file sequence number used to index within a Flash partition directory table.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.1
ciscoFlashFileSize Size of the file in bytes. Note that this size does not include the size of the filesystem file header. File size will always be non-zero.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.2
ciscoFlashFileChecksum File checksum stored in the file header. This checksum is computed and stored when the file is written into Flash. It serves to validate the data written into Flash. Whereas the system will generate and store the checks…	ChecksumString	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.3
ciscoFlashFileStatus Status of a file. A file could be explicitly deleted if the file system supports such a user command facility. Alternately, an existing good file would be automatically deleted if another good file with the same name we…	Enumeration Enumerated Values: 1 deleted 2 invalidChecksum 3 valid	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.4
ciscoFlashFileName Flash file name as specified by the user copying in the file. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partition name, and the file na…	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.5
ciscoFlashFileType Type of the file.	FlashFileType Type Values: 1 unknown 2 config 3 image 4 directory 5 crashinfo	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.6
ciscoFlashFileDate The time at which this file was created.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.7

Table of information for files on the manageable
flash devices sorted by File Types.

ciscoFlashFileByTypeEntry row .1.3.6.1.4.1.9.9.10.1.1.4.2.2.1

An entry in the table of Flash file properties
for each initialized Flash partition. Each entry
represents a file sorted by file type.

This table contains exactly the same set of rows
as are contained in th…

Indexes

ciscoFlashFileType ciscoFlashDeviceIndex ciscoFlashPartitionIndex ciscoFlashFileIndex

Column	Syntax	OID
ciscoFlashFileByTypeSize This object represents exactly the same info as ciscoFlashFileSize object in ciscoFlashFileTable.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.1
ciscoFlashFileByTypeChecksum This object represents exactly the same info as ciscoFlashFileChecksum object in ciscoFlashFileTable.	ChecksumString	.1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.2
ciscoFlashFileByTypeStatus This object represents exactly the same info as ciscoFlashFileStatus object in ciscoFlashFileTable.	Enumeration Enumerated Values: 1 deleted 2 invalidChecksum 3 valid	.1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.3
ciscoFlashFileByTypeName This object represents exactly the same info as ciscoFlashFileName object in ciscoFlashFileTable.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.4
ciscoFlashFileByTypeDate This object represents exactly the same info as ciscoFlashFileDate object in ciscoFlashFileTable.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.5

A table of Flash copy operation entries. Each
entry represents a Flash copy operation (to or
from Flash) that has been initiated.

ciscoFlashCopyEntry row .1.3.6.1.4.1.9.9.10.1.2.1.1

A Flash copy operation entry. Each entry consists
of a command, a source, and optional parameters such
as protocol to be used, a destination, a server address,
etc.

A management station wishing to create an…

Indexes

ciscoFlashCopySerialNumber

Column	Syntax	OID
ciscoFlashCopySerialNumber Object which specifies a unique entry in the table. A management station wishing to initiate a copy operation should use a pseudo-random value for this object when creating or modifying an instance of a ciscoFlashCopyEn…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.10.1.2.1.1.1
ciscoFlashCopyCommand The copy command to be executed. Mandatory. Note that it is possible for a system to support multiple file systems (different file systems on different Flash devices, or different file systems on different partitions wi…	Enumerationr/w Enumerated Values: 1 copyToFlashWithErase 2 copyToFlashWithoutErase 3 copyFromFlash 4 copyFromFlhLog	.1.3.6.1.4.1.9.9.10.1.2.1.1.2
ciscoFlashCopyProtocol The protocol to be used for any copy. Optional. Will default to tftp if not specified. Since feature support depends on a software release, version number within the release, platform, and maybe the image…	Enumerationr/w Enumerated Values: 1 tftp 2 rcp 3 lex 4 ftp 5 scp 6 sftp	.1.3.6.1.4.1.9.9.10.1.2.1.1.3
ciscoFlashCopyServerAddressdeprecated The server address to be used for any copy. Optional. Will default to 'FFFFFFFF'H (or 255.255.255.255). Since this object can just hold only IPv4 Transport type, it is deprecated and replaced by ciscoFla…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.10.1.2.1.1.4
ciscoFlashCopySourceName Source file name, either in Flash or on a server, depending on the type of copy command. Mandatory. For a copy from Flash: File name must be of the form [device>:][:] where is a value obtained fr…	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.10.1.2.1.1.5
ciscoFlashCopyDestinationName Destination file name. For a copy to Flash: File name must be of the form {device>:][<partition>:]<file> where <device> is a value obtained from FlashDeviceName, <partition> is obtained from…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.10.1.2.1.1.6
ciscoFlashCopyRemoteUserName Remote user name for copy via rcp protocol. Optional. This object will be ignored for protocols other than rcp. If specified, it will override the remote user-name configured through the rcmd remote-username con…	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.10.1.2.1.1.7
ciscoFlashCopyStatus The status of the specified copy operation. copyOperationPending : operation request is received and pending for validation and process copyInProgress : specified op…	Enumeration Enumerated Values: 0 copyOperationPending 1 copyInProgress 2 copyOperationSuccess 3 copyInvalidOperation 4 copyInvalidProtocol 5 copyInvalidSourceName 6 copyInvalidDestName 7 copyInvalidServerAddress 8 copyDeviceBusy 9 copyDeviceOpenError 10 copyDeviceError 11 copyDeviceNotProgrammable 12 copyDeviceFull 13 copyFileOpenError 14 copyFileTransferError 15 copyFileChecksumError 16 copyNoMemory 17 copyUnknownFailure 18 copyInvalidSignature 19 copyProhibited	.1.3.6.1.4.1.9.9.10.1.2.1.1.8
ciscoFlashCopyNotifyOnCompletion Specifies whether or not a notification should be generated on the completion of the copy operation. If specified, ciscoFlashCopyCompletionTrap will be generated. It is the responsibility of the management entity to ens…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.10.1.2.1.1.9
ciscoFlashCopyTime Time taken for the copy operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management entity keeps a database of completion times for various…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.2.1.1.10
ciscoFlashCopyEntryStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.10.1.2.1.1.11
ciscoFlashCopyVerify Specifies whether the file that is copied need to be verified for integrity / authenticity, after copy succeeds. If it is set to true, and if the file that is copied doesn't have integrity /authenticity attachement, or …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.10.1.2.1.1.12
ciscoFlashCopyServerAddrType This object indicates the transport type of the address contained in ciscoFlashCopyServerAddrRev1. Optional. Will default to '1' (IPv4 address type).	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.10.1.2.1.1.13
ciscoFlashCopyServerAddrRev1 The server address to be used for any copy. Optional. Will default to 'FFFFFFFF'H (or 255.255.255.255). The Format of this address depends on the value of the ciscoFlashCopyServerAddrType. …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.10.1.2.1.1.14
ciscoFlashCopyRemotePassword Password used by ftp, sftp or scp for copying a file to/from an ftp/sftp/scp server. This object must be created when the ciscoFlashCopyProtocol is ftp, sftp or scp. Reading it returns a zero-length string for security …	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.9.9.10.1.2.1.1.15

A table of Flash partitioning operation entries. Each
entry represents a Flash partitioning operation that
has been initiated.

ciscoFlashPartitioningEntry row .1.3.6.1.4.1.9.9.10.1.2.2.1

A Flash partitioning operation entry. Each entry
consists of the command, the target device, the
partition count, and optionally the partition sizes.

A management station wishing to create an entry should
f…

Indexes

ciscoFlashPartitioningSerialNumber

Column	Syntax	OID
ciscoFlashPartitioningSerialNumber Object which specifies a unique entry in the partitioning operations table. A management station wishing to initiate a partitioning operation should use a pseudo-random value for this object when creating or modifying a…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.10.1.2.2.1.1
ciscoFlashPartitioningCommand The partitioning command to be executed. Mandatory. If the command is unsupported, the partitioningInvalidOperation error will be reported in the operation status. Command Remarks partitio…	Enumerationr/w Enumerated Values: 1 partition	.1.3.6.1.4.1.9.9.10.1.2.2.1.2
ciscoFlashPartitioningDestinationName Destination device name. This name will be the value obtained from FlashDeviceName. If the name is not specified, the default Flash device will be assumed.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.10.1.2.2.1.3
ciscoFlashPartitioningPartitionCount This object is used to specify the number of partitions to be created. Its value cannot exceed the value of ciscoFlashDeviceMaxPartitions. To undo partitioning (revert to a single partition), this object …	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.10.1.2.2.1.4
ciscoFlashPartitioningPartitionSizes This object is used to explicitly specify the size of each partition to be created. The size of each partition will be in units of ciscoFlashDeviceMinPartitionSize. The value of this object will be in the form: …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.10.1.2.2.1.5
ciscoFlashPartitioningStatus The status of the specified partitioning operation. partitioningInProgress : specified operation is active partitioningOperationSuccess : specified operation is supported and completed …	Enumeration Enumerated Values: 1 partitioningInProgress 2 partitioningOperationSuccess 3 partitioningInvalidOperation 4 partitioningInvalidDestName 5 partitioningInvalidPartitionCount 6 partitioningInvalidPartitionSizes 7 partitioningDeviceBusy 8 partitioningDeviceOpenError 9 partitioningDeviceError 10 partitioningNoMemory 11 partitioningUnknownFailure	.1.3.6.1.4.1.9.9.10.1.2.2.1.6
ciscoFlashPartitioningNotifyOnCompletion Specifies whether or not a notification should be generated on the completion of the partitioning operation. If specified, ciscoFlashPartitioningCompletionTrap will be generated. It is the responsibility of the manageme…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.10.1.2.2.1.7
ciscoFlashPartitioningTime Time taken for the operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management entity keeps a database of completion times for various oper…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.2.2.1.8
ciscoFlashPartitioningEntryStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.10.1.2.2.1.9

A table of misc Flash operation entries. Each
entry represents a Flash operation that
has been initiated.

ciscoFlashMiscOpEntry row .1.3.6.1.4.1.9.9.10.1.2.3.1

A Flash operation entry. Each entry consists of a
command, a target, and any optional parameters.

A management station wishing to create an entry should
first generate a pseudo-random serial number to be us…

Indexes

ciscoFlashMiscOpSerialNumber

Column	Syntax	OID
ciscoFlashMiscOpSerialNumber Object which specifies a unique entry in the table. A management station wishing to initiate a flash operation should use a pseudo-random value for this object when creating or modifying an instance of a ciscoFlashMiscO…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.10.1.2.3.1.1
ciscoFlashMiscOpCommand The command to be executed. Mandatory. Note that it is possible for a system to support multiple file systems (different file systems on different Flash devices, or different file systems on different partitions within …	Enumerationr/w Enumerated Values: 1 erase 2 verify 3 delete 4 undelete 5 squeeze 6 format	.1.3.6.1.4.1.9.9.10.1.2.3.1.2
ciscoFlashMiscOpDestinationName Destination file, or partition name. File name must be of the form [device>:][<partition>:]<file> where <device> is a value obtained from FlashDeviceName, <partition> is obtained from FlashPartitionName …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.10.1.2.3.1.3
ciscoFlashMiscOpStatus The status of the specified operation. miscOpInProgress : specified operation is active miscOpOperationSuccess : specified operation is supported and completed successfully …	Enumeration Enumerated Values: 1 miscOpInProgress 2 miscOpOperationSuccess 3 miscOpInvalidOperation 4 miscOpInvalidDestName 5 miscOpDeviceBusy 6 miscOpDeviceOpenError 7 miscOpDeviceError 8 miscOpDeviceNotProgrammable 9 miscOpFileOpenError 10 miscOpFileDeleteFailure 11 miscOpFileUndeleteFailure 12 miscOpFileChecksumError 13 miscOpNoMemory 14 miscOpUnknownFailure 18 miscOpSqueezeFailure 19 miscOpNoSuchFile 20 miscOpFormatFailure	.1.3.6.1.4.1.9.9.10.1.2.3.1.4
ciscoFlashMiscOpNotifyOnCompletion Specifies whether or not a notification should be generated on the completion of an operation. If specified, ciscoFlashMiscOpCompletionTrap will be generated. It is the responsibility of the management entity to ensure …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.10.1.2.3.1.5
ciscoFlashMiscOpTime Time taken for the operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management entity keeps a database of completion times for various oper…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.10.1.2.3.1.6
ciscoFlashMiscOpEntryStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.10.1.2.3.1.7