CISCO-FILTER-GROUP-MIB

        The MIB module is for creating and configuring
object groups to support packet filtering and
access control on IP and other protocols.
        
The cfgFilterGroupTable allows users to create
delete, and get information about filter groups.
Filter groups are uniquely identified by the 
group names.  Filter groups can either be of
network, protocol, service and icmp and filter
group type cannot be changed once it has been created. 
        
The cfgFilterNetworkGroupTable is used for managing
information about IP Addresses.
        
The cfgFilterIpProtocolGroupTable is used for managing
information about protocols.
        
The cfgFilterIpServiceGroupTable is used for managing
information about services(ports).
        
The cfgFilterICMPGroupTable is used for managing
information about ICMP protocol.
        
The cfgFilterNestedGroupTable is used for supporting
nesting of filter groups(i.e configuring filter groups 
inside the other filter groups).
        
Terminologies used:
    ICMP - Internet Control Message Protocol.
    
Source file
CISCO-FILTER-GROUP-MIB
Last revised
Identity
ciscoFilterGroupMIB
Base OID
1.3.6.1.4.1.9.9.474
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC CiscoIpProtocol
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-FILTER-GROUP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-FILTER-GROUP-MIB::ciscoFilterGroupMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-FILTER-GROUP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-FILTER-GROUP-MIB::ciscoFilterGroupMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (49)
.1.3.6.1.4.1.9.9.474
.1.3.6.1.4.1.9.9.474.0
.1.3.6.1.4.1.9.9.474.1
.1.3.6.1.4.1.9.9.474.1.1
.1.3.6.1.4.1.9.9.474.1.1.1
.1.3.6.1.4.1.9.9.474.1.1.1.1
.1.3.6.1.4.1.9.9.474.1.1.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.474.1.1.1.1.2
.1.3.6.1.4.1.9.9.474.1.1.1.1.3
.1.3.6.1.4.1.9.9.474.1.1.1.1.4
.1.3.6.1.4.1.9.9.474.1.1.1.1.5
.1.3.6.1.4.1.9.9.474.1.1.2
.1.3.6.1.4.1.9.9.474.1.1.2.1
.1.3.6.1.4.1.9.9.474.1.1.2.1.1
.1.3.6.1.4.1.9.9.474.1.1.2.1.2
.1.3.6.1.4.1.9.9.474.1.1.2.1.3
.1.3.6.1.4.1.9.9.474.1.1.2.1.4
.1.3.6.1.4.1.9.9.474.1.1.2.1.5
.1.3.6.1.4.1.9.9.474.1.1.2.1.6
.1.3.6.1.4.1.9.9.474.1.1.3
.1.3.6.1.4.1.9.9.474.1.1.3.1
.1.3.6.1.4.1.9.9.474.1.1.3.1.1
.1.3.6.1.4.1.9.9.474.1.1.3.1.2
.1.3.6.1.4.1.9.9.474.1.1.3.1.3
.1.3.6.1.4.1.9.9.474.1.1.3.1.4
.1.3.6.1.4.1.9.9.474.1.1.4
.1.3.6.1.4.1.9.9.474.1.1.4.1
.1.3.6.1.4.1.9.9.474.1.1.4.1.1
Enumeration
.1.3.6.1.4.1.9.9.474.1.1.4.1.2
.1.3.6.1.4.1.9.9.474.1.1.4.1.3
.1.3.6.1.4.1.9.9.474.1.1.4.1.4
.1.3.6.1.4.1.9.9.474.1.1.4.1.5
.1.3.6.1.4.1.9.9.474.1.1.4.1.6
.1.3.6.1.4.1.9.9.474.1.1.5
.1.3.6.1.4.1.9.9.474.1.1.5.1
.1.3.6.1.4.1.9.9.474.1.1.5.1.1
Integer32
.1.3.6.1.4.1.9.9.474.1.1.5.1.2
Integer32
.1.3.6.1.4.1.9.9.474.1.1.5.1.3
.1.3.6.1.4.1.9.9.474.1.1.5.1.4
.1.3.6.1.4.1.9.9.474.1.1.5.1.5
.1.3.6.1.4.1.9.9.474.1.1.6
.1.3.6.1.4.1.9.9.474.1.1.6.1
.1.3.6.1.4.1.9.9.474.1.1.6.1.1
.1.3.6.1.4.1.9.9.474.1.1.6.1.2
.1.3.6.1.4.1.9.9.474.1.1.6.1.3
.1.3.6.1.4.1.9.9.474.1.1.6.1.4
.1.3.6.1.4.1.9.9.474.2
.1.3.6.1.4.1.9.9.474.2.1
.1.3.6.1.4.1.9.9.474.2.2
Dependencies (7) 7 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-TCcisco
  5. INET-ADDRESS-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMP-FRAMEWORK-MIBrfc
  8. CISCO-FILTER-GROUP-MIBciscoselected
Type Definitions (1)
OctetString range: 0..64
Conformance Groups (6)
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.474.2.1.1
The compliance statement for entities implementing
the Cisco IP Protocol Filter MIB.
Required groups
mandatory ciscoFilterObjectGroup
optional ciscoFilterNetworkGroup Implementation of this group is mandatory
if filter group for internet addresses are needed.
optional ciscoFilterIpProtocolGroup Implementation of this group is mandatory
if filter group for protocol is needed.
optional ciscoFilterIpServiceGroup Implementation of this group is mandatory
if filter group for ports are needed.
optional ciscoFilterICMPGroup Implementation of this group is mandatory
if filter group for ICMP is needed.
optional ciscoFilterNestedGroup Implementation of this group is mandatory
if nesting of filter groups is supported.