Fabric Device Management Interface (FDMI) MIB. This MIB module defines objects for managing the devices such as HBA (Host Bus Adapter). It provides device information which have registered with an FC fabric using FDMI. For more information on FDMI, refer to Fibre Channel Generic Services-4 Section 6.7 : Fabric Device Management Interface. |
ciscoMgmt | CISCO-SMI |
FcNameId | CISCO-ST-TC |
vsanIndex, notifyVsanIndex | CISCO-VSAN-MIB |
SnmpAdminString | SNMP-FRAMEWORK-MIB |
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP | SNMPv2-CONF |
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE | SNMPv2-SMI |
TEXTUAL-CONVENTION, TruthValue | SNMPv2-TC |
Name | Base Type | Values/Constraints |
---|---|---|
invalidCommandCode(1), unableToPerformCmdReq(2), invalidSize(3) | ||
noAdditionalExpl(1), hbaAlreadyRegistered(2), attrForSpecifiedHbaNotReg(3), hbaAttrMultiAttribSameType(4), invalidHbaAttrBlockLen(5), reqdHbaAttrNotPresent(6), origPortNotInRegPortList(7), hbaIdNotInRegPortList(8), portAttrNotRegistered(9), portNotRegistered(10), portAttrMultiAttrSameType(11), invalidPortAttrBlockLen(12), none(13) |
![]() | .1.3.6.1.4.1.9.9.373 | |
![]() | .1.3.6.1.4.1.9.9.373.0 | |
![]() | .1.3.6.1.4.1.9.9.373.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.10 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.11 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.12 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.2 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.3 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.4 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.5 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.6 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.7 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.8 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.1.1.9 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.1 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.2 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.3 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.4 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.5 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.6 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.2.1.7 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.3 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.4 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.5 | |
![]() | .1.3.6.1.4.1.9.9.373.1.2.6 | |
![]() | .1.3.6.1.4.1.9.9.373.1.3 | |
![]() | .1.3.6.1.4.1.9.9.373.2 | |
![]() | .1.3.6.1.4.1.9.9.373.2.1 | |
![]() | .1.3.6.1.4.1.9.9.373.2.2 |
Name | OID | Description |
---|---|---|
.1.3.6.1.4.1.9.9.373.0.1 | This notification is generated by the FDMI whenever it rejects a registration request. The FDMI should update the 'cfdmiRejectReasonCode' and 'cfdmiRejectReasonCodeExpl' objects with the corresponding reason code and reason code explanation before sending the notification. These two objects are also included along with the notification to provide the reason for the reject. |