CISCO-FCSP-MIB

        MIB module for managing Fibre Channel Security for the
fibre channel devices.
        
This MIB is used to configure and monitor the 
Fibre-Channel Security Protocol (FC-SP)
        
Rev 1.1 of FC-SP, Dated 04/18/03,
T11/Project 1570-D.
Please refer to http://www.t11.org.
    
Source file
CISCO-FCSP-MIB
Last revised
Identity
ciscoFcspMIB
Base OID
1.3.6.1.4.1.9.9.391
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-ST-TC FcNameId
IF-MIB ifDescr ifIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-FCSP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-FCSP-MIB::ciscoFcspMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-FCSP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-FCSP-MIB::ciscoFcspMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (36)
.1.3.6.1.4.1.9.9.391
.1.3.6.1.4.1.9.9.391.0
.1.3.6.1.4.1.9.9.391.1
.1.3.6.1.4.1.9.9.391.1.1
.1.3.6.1.4.1.9.9.391.1.1.1
.1.3.6.1.4.1.9.9.391.1.1.1.1
cfcspMode r/w
Enumeration
.1.3.6.1.4.1.9.9.391.1.1.1.1.1
minutesUnsigned32
.1.3.6.1.4.1.9.9.391.1.1.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.391.1.1.1.1.3
Enumeration
.1.3.6.1.4.1.9.9.391.1.1.2
secondsUnsigned32
.1.3.6.1.4.1.9.9.391.1.1.3
.1.3.6.1.4.1.9.9.391.1.1.4
OctetString
.1.3.6.1.4.1.9.9.391.1.1.4.1
OctetString
.1.3.6.1.4.1.9.9.391.1.1.4.2
OctetString
.1.3.6.1.4.1.9.9.391.1.1.4.3
.1.3.6.1.4.1.9.9.391.1.1.5
.1.3.6.1.4.1.9.9.391.1.1.5.1
.1.3.6.1.4.1.9.9.391.1.1.5.1.1
OctetString
.1.3.6.1.4.1.9.9.391.1.1.5.1.2
.1.3.6.1.4.1.9.9.391.1.1.5.1.3
.1.3.6.1.4.1.9.9.391.1.1.6
.1.3.6.1.4.1.9.9.391.1.1.6.1
.1.3.6.1.4.1.9.9.391.1.1.6.1.1
OctetString
.1.3.6.1.4.1.9.9.391.1.1.6.1.2
.1.3.6.1.4.1.9.9.391.1.1.6.1.3
.1.3.6.1.4.1.9.9.391.1.2
.1.3.6.1.4.1.9.9.391.1.3
.1.3.6.1.4.1.9.9.391.1.3.1
.1.3.6.1.4.1.9.9.391.1.3.1.1
.1.3.6.1.4.1.9.9.391.1.3.1.1.1
.1.3.6.1.4.1.9.9.391.1.3.1.1.2
.1.3.6.1.4.1.9.9.391.1.3.1.1.3
.1.3.6.1.4.1.9.9.391.1.4
.1.3.6.1.4.1.9.9.391.2
.1.3.6.1.4.1.9.9.391.2.1
.1.3.6.1.4.1.9.9.391.2.2
Dependencies (9) 7 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-ST-TCcisco
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. SNMP-FRAMEWORK-MIBrfc
  10. CISCO-FCSP-MIBciscoselected
Conformance Groups (4)
A collection of objects for configuring Fibre Channel
security Information.
.1.3.6.1.4.1.9.9.391.2.2.1
A collection of objects for configuring Fibre Channel
security Information.
.1.3.6.1.4.1.9.9.391.2.2.2
A collection of objects for monitoring FCSP
statistics.
.1.3.6.1.4.1.9.9.391.2.2.3
A collection of objects for FCSP notifications.
.1.3.6.1.4.1.9.9.391.2.2.4
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.391.2.1.1
The compliance statement for entities which
implement the CISCO-FCSP-MIB.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.9.9.391.0.1
FCSP Authentication Failure trap