Standard view Table view

CISCO-ENTITY-PERFORMANCE-MIB

        This MIB module defines managed objects that facilitate to
monitor performance of any physical entity, which are listed in
the ENTITY-MIB (RFC 4133) entPhysicalTable.
        
The performance monitoring includes utilization, input/output
packet/byte rates, etc. This monitoring is through the
measurement periods of current, 1-minute, 5-minutes,
15-minutes.
        
The performance data calculation method would vary for each
entity for a specific interval, hence users of this MIB should
obtain the information using the object cepStatsAlgorithm for a
specific interval.
        
The performance statistics can be accumulated for the 1-minute,
5-minutes and 15-minutes (recommended) intervals. At any one
time, an agent maintains one current (incomplete) interval for
each interval type and up to 96 completed interval number. Fewer
than 96 interval number of data will be available if the agent
has been restarted within the last 24 hours for 15 minutes
interval, 8 hours for 5 minutes interval, and 1.36 hours for 1
minute interval.
        
There is no requirement for an agent to ensure fixed
relationship between the start of a one/five/fifteen minute
intervals and wall clock, however some agents may align the
fifteen minutes interval with quarter hours.
        
The following terminologies apply within the scope of this MIB.
        
o entity - Any physical entity which can support performance 
           monitoring as specified in this MIB
        
o Utilization - The ratio of current usage to the maximum 
                capacity the entity can handle
        
o Input - Communication channel where packets arrive on the
          entity
        
o Output - Communication channel where packets leave the entity
        
Acronyms
========
SMA - Simple Moving Average
Source file
CISCO-ENTITY-PERFORMANCE-MIB
Last revised
Identity
ciscoEntityPerformanceMIB
Base OID
1.3.6.1.4.1.9.9.756
Imported Objects
CISCO-SMI ciscoMgmt
ENTITY-MIB entPhysicalIndex
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DateAndTime TEXTUAL-CONVENTION TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ENTITY-PERFORMANCE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ENTITY-PERFORMANCE-MIB::ciscoEntityPerformanceMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENTITY-PERFORMANCE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENTITY-PERFORMANCE-MIB::ciscoEntityPerformanceMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (44)
ciscoEntityPerformanceMIB
.1.3.6.1.4.1.9.9.756
ciscoEntityPerformanceMIBNotifs
.1.3.6.1.4.1.9.9.756.0
ciscoEntityPerformanceMIBObjects
.1.3.6.1.4.1.9.9.756.1
cepEntityTable
.1.3.6.1.4.1.9.9.756.1.1
cepEntityEntry
ENTITY-MIBentPhysicalIndex
 .1.3.6.1.4.1.9.9.756.1.1.1
cepEntityNumReloads
reloadsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.756.1.1.1.1
cepEntityLastReloadTime
SNMPv2-TCDateAndTime
 .1.3.6.1.4.1.9.9.756.1.1.1.2
cepConfigTable
.1.3.6.1.4.1.9.9.756.1.2
cepConfigEntry
ENTITY-MIBentPhysicalIndexcepConfigIntervalcepConfigPerfType
 .1.3.6.1.4.1.9.9.756.1.2.1
cepConfigInterval
CiscoEntPerfInterval
 .1.3.6.1.4.1.9.9.756.1.2.1.1
cepConfigPerfType
CiscoEntPerfType
 .1.3.6.1.4.1.9.9.756.1.2.1.2
cepConfigPerfRange
CiscoEntPerfRange
 .1.3.6.1.4.1.9.9.756.1.2.1.3
cepConfigRisingThreshold r/w
CiscoEntPerfMeasurement
 .1.3.6.1.4.1.9.9.756.1.2.1.4
cepConfigFallingThreshold r/w
CiscoEntPerfMeasurement
 .1.3.6.1.4.1.9.9.756.1.2.1.5
cepConfigThresholdNotifEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.756.1.2.1.6
cepStatsTable
.1.3.6.1.4.1.9.9.756.1.3
cepStatsEntry
ENTITY-MIBentPhysicalIndexcepConfigIntervalcepConfigPerfType
 .1.3.6.1.4.1.9.9.756.1.3.1
cepStatsAlgorithm
CiscoEntPerfIntervalAlgo
 .1.3.6.1.4.1.9.9.756.1.3.1.1
cepStatsMeasurement
CiscoEntPerfMeasurement
 .1.3.6.1.4.1.9.9.756.1.3.1.2
cepEntityIntervalTable
.1.3.6.1.4.1.9.9.756.1.4
cepEntityIntervalEntry
ENTITY-MIBentPhysicalIndexcepHistInterval
 .1.3.6.1.4.1.9.9.756.1.4.1
cepHistInterval
CiscoEntPerfHistInterval
 .1.3.6.1.4.1.9.9.756.1.4.1.1
cepIntervalTimeElapsed
secondsUnsigned32
 .1.3.6.1.4.1.9.9.756.1.4.1.2
cepValidIntervalCount
Unsigned32
 .1.3.6.1.4.1.9.9.756.1.4.1.3
cepIntervalStatsTable
.1.3.6.1.4.1.9.9.756.1.5
cepIntervalStatsEntry
ENTITY-MIBentPhysicalIndexcepHistIntervalcepConfigPerfTypecepIntervalNumber
 .1.3.6.1.4.1.9.9.756.1.5.1
cepIntervalNumber
Unsigned32
 .1.3.6.1.4.1.9.9.756.1.5.1.1
cepIntervalStatsValidData
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.756.1.5.1.2
cepIntervalStatsRange
CiscoEntPerfRange
 .1.3.6.1.4.1.9.9.756.1.5.1.3
cepIntervalStatsMeasurement
CiscoEntPerfMeasurement
 .1.3.6.1.4.1.9.9.756.1.5.1.4
cepIntervalStatsCreateTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.9.756.1.5.1.5
ciscoEntityPerformanceMIBNotifObjects
.1.3.6.1.4.1.9.9.756.1.6
cepThresholdNotifEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.756.1.6.1
cepThroughputNotifEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.756.1.6.2
cepThroughputTable
.1.3.6.1.4.1.9.9.756.1.7
cepThroughputEntry
ENTITY-MIBentPhysicalIndex
 .1.3.6.1.4.1.9.9.756.1.7.1
cepThroughputLicensedBW
bits per secondSNMPv2-SMICounter64
 .1.3.6.1.4.1.9.9.756.1.7.1.1
cepThroughputLevel
Enumeration
 .1.3.6.1.4.1.9.9.756.1.7.1.2
cepThroughputInterval r/w
secondsInteger32
 .1.3.6.1.4.1.9.9.756.1.7.1.3
cepThroughputThreshold r/w
percentInteger32
 .1.3.6.1.4.1.9.9.756.1.7.1.4
cepThroughputAvgRate
bits per secondSNMPv2-SMICounter64
 .1.3.6.1.4.1.9.9.756.1.7.1.5
ciscoEntityPerformanceMIBConform
.1.3.6.1.4.1.9.9.756.2
ciscoEntityPerformanceMIBCompliances
.1.3.6.1.4.1.9.9.756.2.1
ciscoEntityPerformanceMIBGroups
.1.3.6.1.4.1.9.9.756.2.2
Dependencies (8) 5 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANA-ENTITY-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMP-FRAMEWORK-MIBrfc
  7. UUID-TC-MIBrfc
  8. ENTITY-MIBrfc
  9. CISCO-ENTITY-PERFORMANCE-MIBciscoselected
Type Definitions (6)
CiscoEntPerfHistInterval
Enumeration
oneMinute(1)
fiveMinutes(2)
fifteenMinutes(3)
CiscoEntPerfInterval
Enumeration
current(1)
oneMinute(2)
fiveMinutes(3)
fifteenMinutes(4)
CiscoEntPerfIntervalAlgo
Enumeration
unknown(1)
other(2)
current(3)
algoSMA(4)
CiscoEntPerfMeasurement
Unsigned64
CiscoEntPerfRange
Enumeration
rangePercentage(1)
rangeInt32(2)
rangeInt64(3)
CiscoEntPerfType
Enumeration
utilization(1)
bitInputRate(2)
bitOutputRate(3)
bitDropRate(4)
packetInputRate(5)
packetOutputRate(6)
packetDropRate(7)
Conformance Groups (8)
ciscoEntityPerformanceMIBEntityGroup
cepEntityNumReloads cepEntityLastReloadTime
This group contains collection of entity information objects.
 .1.3.6.1.4.1.9.9.756.2.2.1
ciscoEntityPerformanceMIBConfigGroup
cepConfigRisingThreshold cepConfigFallingThreshold cepConfigPerfRange cepConfigThresholdNotifEnabled
This group contains collection of configuration objects related
to performance.
 .1.3.6.1.4.1.9.9.756.2.2.2
ciscoEntityPerformanceMIBPerfStatsGroup
cepStatsAlgorithm cepStatsMeasurement
This group contains collection of performance statistics
information objects.
 .1.3.6.1.4.1.9.9.756.2.2.3
ciscoEntityPerformanceMIBEntityIntervalGroup
cepIntervalTimeElapsed cepValidIntervalCount
This group contains collection of performance interval
data objects.
 .1.3.6.1.4.1.9.9.756.2.2.4
ciscoEntityPerformanceMIBIntervalStatsGroup
cepIntervalStatsValidData cepIntervalStatsMeasurement cepIntervalStatsCreateTime cepIntervalStatsRange
This group contains collection of performance interval
statistics objects.
 .1.3.6.1.4.1.9.9.756.2.2.5
ciscoEntityPerformanceMIBNotifControlGroup
cepThresholdNotifEnabled cepThroughputNotifEnabled
This group contains collection of notification
control objects.
 .1.3.6.1.4.1.9.9.756.2.2.6
ciscoEntityPerformanceMIBNotificationGroup
cepPerfThreshRisingEvent cepPerfThreshFallingEvent cepThroughputNotif
This group contains collection of performance notification
objects.
 .1.3.6.1.4.1.9.9.756.2.2.7
ciscoEntityPerformanceMIBThroughputGroup
cepThroughputLicensedBW cepThroughputLevel cepThroughputInterval cepThroughputThreshold cepThroughputAvgRate
This group contains collection of throughput rate objects.
 .1.3.6.1.4.1.9.9.756.2.2.8
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.756.2.1.1
The compliance statement for CISCO-ENTITY-PERFORMANCE-MIB.
Required groups
mandatory ciscoEntityPerformanceMIBEntityGroup
mandatory ciscoEntityPerformanceMIBConfigGroup
mandatory ciscoEntityPerformanceMIBNotificationGroup
mandatory ciscoEntityPerformanceMIBPerfStatsGroup
optional ciscoEntityPerformanceMIBIntervalStatsGroup This group is optional for the entity which does not maintain
15 minutes interval performance data.
optional ciscoEntityPerformanceMIBNotifControlGroup This group is optional for the entity does not
support threshold notification.
optional ciscoEntityPerformanceMIBEntityIntervalGroup This group is optional for the entity, which does not
support historic performance data.
optional ciscoEntityPerformanceMIBThroughputGroup This group is optional for the entity which does not maintain
throughput rate data.
Object refinements
ObjectAccessSyntaxDescription
cepConfigRisingThreshold readonly
The write operation is optional.
cepConfigFallingThreshold readonly
The write operation is optional.
Notifications / Traps (3)
NameOIDDescription
cepPerfThreshRisingEvent
cepConfigPerfRange cepConfigRisingThreshold cepStatsMeasurement
.1.3.6.1.4.1.9.9.756.0.1
A notification indicating that the specific performance
measurement is rising the configured threshold on this
physical entity at a specific performance interval.

This notification will be sent, whenever the
cepStatsMeasurement is equal to or above the
cepConfigRisingThreshold for a specific performance
measurement at a specific interval and the
notification control objects are enabled.

An agent may throttle the generation of consecutive
cepPerfThreshRisingEvent notification so that
there is at least a five second (suggested default)
gap between notification for an entity of specific
performance measurement type at a specific interval.
cepPerfThreshFallingEvent
cepConfigPerfRange cepConfigFallingThreshold cepStatsMeasurement
.1.3.6.1.4.1.9.9.756.0.2
A notification indicating that the specific performance
measurement is falling the configured threshold on this
physical entity at a specific performance interval.

This notification will be sent, whenever the
cepStatsMeasurement is equal to or below the
cepConfigFallingThreshold for a specific performance
measurement at a specific interval and the
notification control objects are enabled.

An agent may throttle the generation of consecutive
cepPerfThreshFallingEvent notification so that
there is at least a five second (suggested default)
gap between notification for an entity of specific
performance measurement type at a specific interval.
cepThroughputNotif
cepThroughputLicensedBW cepThroughputLevel cepThroughputAvgRate
.1.3.6.1.4.1.9.9.756.0.3
A notification indicating that the average throughput rate for
the configured interval has exceeded the threshold or reached
maximum bandwidth allowed.

This notification will be sent, whenever the
cepThroughputLevel object has the value warning(2) or exceed(3).
The condition for trap generation will be checked in every
cepThroughputInterval.

cepThroughputNotif with ceqfpThrougputLevel as
warning(2) indicates that average throughput rate has crossed
the configured threshold.

cepThroughputNotif with cepThrougputLevel as exceed(3)
indicates that average throughput rate has reached maximum
licensed bandwidth.