CISCO-DYNAMIC-PORT-VSAN-MIB
The MIB module for the management of the
Dynamic Port Vsan Membership (DPVM) module.
DPVM provides the ability to assign (virtual
storage area network) VSAN IDs dynamically
to switch ports based on the device logging
in on the port. The logging-in device can
be identified by its port World Wide Name (pWWN)
and/or its node World Wide Name (nWWN).
- Source file
CISCO-DYNAMIC-PORT-VSAN-MIB- Last revised
- Identity
ciscoDpvmMIB- Base OID
1.3.6.1.4.1.9.9.421
Imported Objects
| CISCO-PSM-MIB | CpsmActivateResult CpsmDbActivate CpsmDiffDb CpsmDiffReason |
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcNameId FcNameIdOrZero VsanIndex |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-DYNAMIC-PORT-VSAN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-DYNAMIC-PORT-VSAN-MIB::ciscoDpvmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DYNAMIC-PORT-VSAN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DYNAMIC-PORT-VSAN-MIB::ciscoDpvmMIB'
Objects (42)
Showing 42 of 42 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.421 |
||
.1.3.6.1.4.1.9.9.421.0 |
||
.1.3.6.1.4.1.9.9.421.1 |
||
.1.3.6.1.4.1.9.9.421.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.421.1.1.1 |
|
.1.3.6.1.4.1.9.9.421.1.1.10 |
||
.1.3.6.1.4.1.9.9.421.1.1.10.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.421.1.1.10.1.1 |
|
.1.3.6.1.4.1.9.9.421.1.1.10.1.2 |
||
.1.3.6.1.4.1.9.9.421.1.1.10.1.3 |
||
.1.3.6.1.4.1.9.9.421.1.1.10.1.4 |
||
.1.3.6.1.4.1.9.9.421.1.1.10.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.421.1.1.11 |
|
.1.3.6.1.4.1.9.9.421.1.1.12 |
||
.1.3.6.1.4.1.9.9.421.1.1.13 |
||
.1.3.6.1.4.1.9.9.421.1.1.2 |
||
.1.3.6.1.4.1.9.9.421.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.421.1.1.2.1.1 |
|
.1.3.6.1.4.1.9.9.421.1.1.2.1.2 |
||
|
|
.1.3.6.1.4.1.9.9.421.1.1.2.1.3 |
|
.1.3.6.1.4.1.9.9.421.1.1.2.1.4 |
||
|
|
.1.3.6.1.4.1.9.9.421.1.1.2.1.5 |
|
|
|
.1.3.6.1.4.1.9.9.421.1.1.3 |
|
.1.3.6.1.4.1.9.9.421.1.1.4 |
||
|
|
.1.3.6.1.4.1.9.9.421.1.1.5 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.421.1.1.6 |
|
.1.3.6.1.4.1.9.9.421.1.1.7 |
||
.1.3.6.1.4.1.9.9.421.1.1.7.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.421.1.1.7.1.1 |
|
.1.3.6.1.4.1.9.9.421.1.1.7.1.2 |
||
.1.3.6.1.4.1.9.9.421.1.1.7.1.3 |
||
.1.3.6.1.4.1.9.9.421.1.1.7.1.4 |
||
.1.3.6.1.4.1.9.9.421.1.1.7.1.5 |
||
.1.3.6.1.4.1.9.9.421.1.1.8 |
||
.1.3.6.1.4.1.9.9.421.1.1.8.1 |
||
.1.3.6.1.4.1.9.9.421.1.1.8.1.1 |
||
.1.3.6.1.4.1.9.9.421.1.1.8.1.2 |
||
.1.3.6.1.4.1.9.9.421.1.1.8.1.3 |
||
|
|
.1.3.6.1.4.1.9.9.421.1.1.9 |
|
.1.3.6.1.4.1.9.9.421.2 |
||
.1.3.6.1.4.1.9.9.421.2.1 |
||
.1.3.6.1.4.1.9.9.421.2.2 |
Dependencies (12) 7 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-ST-TCcisco
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-VSAN-MIBcisco
- CISCO-PSM-MIBcisco
- CISCO-DYNAMIC-PORT-VSAN-MIBciscoselected
Type Definitions (1)
| Enumeration |
pwwn(1)nwwn(2) |
Conformance Groups (4)
|
cdpvmNextAvailIndex cdpvmLoginDevType cdpvmLoginDev cdpvmLoginDevVsan cdpvmRowStatus cdpvmActivate cdpvmActivateResult cdpvmCopyEnfToConfig cdpvmDynPortVsan cdpvmDynPortDevPwwn cdpvmDynPortDevNwwn cdpvmActivationState
A set of objects for configuration of
DPVM bindings. |
.1.3.6.1.4.1.9.9.421.2.2.1
|
|
|
A set of objects for displaying enforced
DPVM bindings. |
.1.3.6.1.4.1.9.9.421.2.2.2
|
|
|
A set of object(s) for configuring auto-learn
of DPVM bindings. |
.1.3.6.1.4.1.9.9.421.2.2.3
|
|
|
A set of objects for configuring and displaying
database compare operations. |
.1.3.6.1.4.1.9.9.421.2.2.4
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.421.2.1.1The compliance statement for entities which
implement the Dynamic Port VSAN Membership
Manager.
implement the Dynamic Port VSAN Membership
Manager.
Required groups
| mandatory | ciscoDpvmConfigGroup | |
| mandatory | ciscoDpvmEnforcedGroup | |
| optional | ciscoDpvmAutoLearnGroup |
This group is mandatory only for implementations that support Auto Learning of bindings. |
| optional | ciscoDpvmDiffGroup |
This group is mandatory only for implementations that support difference (compare) operations between the config and enforced databases. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cdpvmRowStatus | readwrite |
active(1), createAndGo(4), destroy(6)
|
Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported. |