CISCO-DYNAMIC-ARP-INSPECTION-MIB
The MIB module is for configuration of Dynamic ARP Inspection
feature. Dynamic ARP Inspection is a security mechanism which
validate ARP packets seen on access ports.
- Source file
CISCO-DYNAMIC-ARP-INSPECTION-MIB- Last revised
- Identity
ciscoDynamicArpInspectionMIB- Base OID
1.3.6.1.4.1.9.9.374
Imported Objects
| CISCO-PRIVATE-VLAN-MIB | VlanIndexOrZero |
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus StorageType TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-DYNAMIC-ARP-INSPECTION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-DYNAMIC-ARP-INSPECTION-MIB::ciscoDynamicArpInspectionMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DYNAMIC-ARP-INSPECTION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DYNAMIC-ARP-INSPECTION-MIB::ciscoDynamicArpInspectionMIB'
Objects (63)
Showing 63 of 63 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.374 |
||
.1.3.6.1.4.1.9.9.374.0 |
||
.1.3.6.1.4.1.9.9.374.1 |
||
.1.3.6.1.4.1.9.9.374.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.374.1.1.2 |
|
|
entriesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.374.1.1.3 |
|
|
|
entriesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.374.1.1.4 |
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.374.1.1.5 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.374.1.1.6 |
|
.1.3.6.1.4.1.9.9.374.1.1.7 |
||
.1.3.6.1.4.1.9.9.374.1.1.7.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.374.1.1.7.1.1 |
|
.1.3.6.1.4.1.9.9.374.1.1.7.1.2 |
||
.1.3.6.1.4.1.9.9.374.1.1.7.1.3 |
||
.1.3.6.1.4.1.9.9.374.1.1.7.1.4 |
||
.1.3.6.1.4.1.9.9.374.1.1.7.1.5 |
||
.1.3.6.1.4.1.9.9.374.1.1.7.1.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.374.1.1.7.1.7 |
|
.1.3.6.1.4.1.9.9.374.1.1.7.1.8 |
||
.1.3.6.1.4.1.9.9.374.1.1.7.1.9 |
||
.1.3.6.1.4.1.9.9.374.1.2 |
||
.1.3.6.1.4.1.9.9.374.1.2.1 |
||
.1.3.6.1.4.1.9.9.374.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.2.1.1.2 |
||
.1.3.6.1.4.1.9.9.374.1.2.2 |
||
.1.3.6.1.4.1.9.9.374.1.2.2.1 |
||
.1.3.6.1.4.1.9.9.374.1.2.2.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.2.2.1.10 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.374.1.2.2.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.374.1.2.2.1.3 |
|
.1.3.6.1.4.1.9.9.374.1.2.2.1.4 |
||
.1.3.6.1.4.1.9.9.374.1.2.2.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.374.1.2.2.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.374.1.2.2.1.7 |
|
.1.3.6.1.4.1.9.9.374.1.2.2.1.8 |
||
.1.3.6.1.4.1.9.9.374.1.2.2.1.9 |
||
.1.3.6.1.4.1.9.9.374.1.3 |
||
.1.3.6.1.4.1.9.9.374.1.3.1 |
||
.1.3.6.1.4.1.9.9.374.1.3.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.3.1.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.3.2 |
||
.1.3.6.1.4.1.9.9.374.1.3.2.1 |
||
|
|
packet per secondSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.374.1.3.2.1.1 |
.1.3.6.1.4.1.9.9.374.1.4 |
||
.1.3.6.1.4.1.9.9.374.1.4.1 |
||
.1.3.6.1.4.1.9.9.374.1.4.1.1 |
||
.1.3.6.1.4.1.9.9.374.1.4.1.1.1 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.10 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.11 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.12 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.2 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.3 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.4 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.5 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.374.1.4.1.1.9 |
|
.1.3.6.1.4.1.9.9.374.2 |
||
.1.3.6.1.4.1.9.9.374.2.1 |
||
.1.3.6.1.4.1.9.9.374.2.2 |
Dependencies (22) 9 direct · 13 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- RMON-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-VTP-MIBcisco
- CISCO-PRIVATE-VLAN-MIBcisco
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- Q-BRIDGE-MIBrfc
- CISCO-DYNAMIC-ARP-INSPECTION-MIBciscoselected
Conformance Groups (12)
|
A collection of object which is used to configure Dynamic
ARP Inspection logging. |
.1.3.6.1.4.1.9.9.374.2.2.1
|
|
|
A collection of object which are used to configure as
well as show information regarding the Dynamic ARP Inspection feature per VLAN. |
.1.3.6.1.4.1.9.9.374.2.2.2
|
|
|
A collection of object which are used to configure as
well as show information regarding the interface trust state for Dynamic ARP Inspection purpose. |
.1.3.6.1.4.1.9.9.374.2.2.3
|
|
|
A collection of object which are used to configure as
well as show information regarding the rate limit per interface for Dynamic ARP Inspection purpose. |
.1.3.6.1.4.1.9.9.374.2.2.4
|
|
|
A collection of object which provides logging configuration
for Dynamic ARP Inspection feature. |
.1.3.6.1.4.1.9.9.374.2.2.5
|
|
|
A collection of object which provides address validation
configuration for Dynamic ARP Inspection feature. |
.1.3.6.1.4.1.9.9.374.2.2.6
|
|
|
cdaiVlanDynArpInspAdmin cdaiVlanDynArpInspOper cdaiVlanFilterArpAclName cdaiVlanFilterArpAclStatic cdaiVlanAclLogging cdaiVlanDhcpBindingLogging cdaiVlanCfgStorageType cdaiVlanCfgRowStatus
A collection of object which provides additional VLAN
configuration for Dynamic ARP Inspection feature. |
.1.3.6.1.4.1.9.9.374.2.2.7
|
|
|
cdaiVlanForwarded cdaiVlanDropped cdaiVlanAclPermitted cdaiVlanDhcpBindingsPermitted cdaiVlanAclDenied cdaiVlanDhcpBindingDenied cdaiVlanSrcMacValidationFailures cdaiVlanDestMacValidationFailures cdaiVlanIpValidationFailures
A collection of object which provides Dynamic ARP Inspection
statistics per VLAN. |
.1.3.6.1.4.1.9.9.374.2.2.8
|
|
|
cdaiLogBufferInterface cdaiLogBufferVlan cdaiLogBufferSenderMacAddress cdaiLogBufferSenderAddressType cdaiLogBufferSenderIpAddress cdaiLogBufferReason cdaiLogBufferLastUpdate cdaiLogBufferPacketsCount
A collection of object which provides logging information
for Dynamic ARP Inspection feature. |
.1.3.6.1.4.1.9.9.374.2.2.9
|
|
|
A collection of object which provides additional Dynamic
ARP Inspection statistics per VLAN. |
.1.3.6.1.4.1.9.9.374.2.2.10
|
|
|
A collection of object which provides additional VLAN
configuration for ARP Probe packets. |
.1.3.6.1.4.1.9.9.374.2.2.11
|
|
|
A collection of object which provides log buffer action.
|
.1.3.6.1.4.1.9.9.374.2.2.12
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.374.2.1.1The compliance statement for CISCO-DYNAMIC-ARP-INSPECTION-MIB.
This compliance is superceded by cdaiMIBCompliance1.
This compliance is superceded by cdaiMIBCompliance1.
Required groups
| mandatory | cdaiVlanConfigGroup | |
| mandatory | cdaiIfConfigGroup | |
| optional | cdaiGlobalLoggingGroup |
This group is mandatory only for the platform which supports enabling Dynamic ARP Inspection logging at the device level. |
| optional | cdaiIfRateLimitGroup |
This group is mandatory only for the platform which supports Dynamic ARP Inspection rate limit per interface. |
OID
.1.3.6.1.4.1.9.9.374.2.1.2The compliance statement for CISCO-DYNAMIC-ARP-INSPECTION-MIB
Required groups
| mandatory | cdaiVlanCfgGroup | |
| mandatory | cdaiIfConfigGroup | |
| optional | cdaiVlanConfigGroup |
This group is mandatory only for the platform which supports enabling Dynamic ARP Inspection per VLAN. |
| optional | cdaiGlobalLoggingGroup |
This group is mandatory only for the platform which supports enabling Dynamic ARP Inspection logging at the device level. |
| optional | cdaiIfRateLimitGroup |
This group is mandatory only for the platform which supports Dynamic ARP Inspection rate limit per interface. |
| optional | cdaiLoggingConfigGroup |
This group is mandatory only for the platform which supports Dynamic ARP Inspection logging configuration. |
| optional | cdaiAddressValidationGroup |
This group is mandatory only for the platform which supports address validation configuration. |
| optional | cdaiLogBufferGroup |
This group is mandatory only for the platform which supports log buffer information for Dynamic ARP Inspection feature. |
| optional | cdaiVlanStatisticsGroup |
This group is mandatory only for the platform which supports Dynamic ARP Inspection statistics per VLAN. |
| optional | cdaiVlanExtStatisticsGroup |
This group is mandatory only for the platform which supports additional Dynamic ARP Inspection statistics per VLAN. |
| optional | cdaiVlanArpProbeGroup |
This group is mandatory only for the platform which supports VLAN configuration for ARP Probe packets. |
| optional | cdaiLogBufferActionGroup |
This group is mandatory only for the platform which supports log buffer action. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cdaiVlanDynArpInspEnable | readonly | Write access is not required. | |
| cdaiVlanDynArpInspAdmin | readonly | Write access is not required. | |
| cdaiVlanFilterArpAclName | readonly | Write access is not required. | |
| cdaiVlanFilterArpAclStatic | readonly | Write access is not required. | |
| cdaiVlanAclLogging | readonly | Write access is not required. | |
| cdaiVlanDhcpBindingLogging | readonly | Write access is not required. | |
| cdaiVlanCfgStorageType | readonly | Write access is not required. | |
| cdaiVlanCfgRowStatus | readonly |
active(1)
|
Read-create access is not required. |
| cdaiIfTrustEnable | readonly | Write access is not required. | |
| cdaiLoggingEnable | readonly | Write access is not required. | |
| cdaiIfRateLimit | readonly | Write access is not required. | |
| cdaiLogBufferSize | readonly | Write access is not required. | |
| cdaiLoggingRate | readonly | Write access is not required. | |
| cdaiLoggingInterval | readonly | Write access is not required. | |
| cdaiAddressValidate | readonly | Write access is not required. | |
| cdaiVlanArpProbeLogging | readonly | Write access is not required. | |
| cdaiLogBufferAction | readonly | Write access is not required. |