CISCO-DS0BUNDLE-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
5
cdsx0BundleExtTable
table
.1.3.6.1.4.1.9.10.33.1.1.1
·
1 row entry
·
4 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cdsx0BundleExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS0BUNDLE-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS0BUNDLE-EXT-MIB::cdsx0BundleExtTable'
This table is used to supplement the dsx0BundleTable.
Contains objects to configure a ds0Bundle.
The values of objects cdsx0BundleExtDs1Index and
cdsx0BundleExtChannelMap must be specified for
the associated row to become active.
The values of objects cdsx0BundleExtDs1Index and
cdsx0BundleExtChannelMap must be specified for
the associated row to become active.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The ifIndex of the DS1 line containing the ds0
timeslots in this bundle. The ds0 bundle interface is layered on top of the DS1 line. This layering is represented in the ifStackTable. This … |
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.9.10.33.1.1.1.1.1 |
||||||
|
A list of ds0 timeslots that comprise this ds0
bundle. This object is not instantiated until the value is specified. The value may be set only when the ds0 bundle is created. |
Ds0ChannelListr/w Type Constraints: range: 0..4 |
.1.3.6.1.4.1.9.10.33.1.1.1.1.2 |
||||||
|
The type of encapsulation for this bundle.
A ds0 bundle is a logical serial port. Setting this object defines the type of the serial port. If not specified, the value is none(1), indicating that the enc… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.10.33.1.1.1.1.3 |
||||||
|
The data rate of each ds0 in this bundle.
rate56 - 56kb/s rate64 - 64kb/s For ds0's on a T1 line, the value should be rate56(1) if 'robbed bit' signaling is used, and rate64(2) if clear channel signa… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.10.33.1.1.1.1.4 |
cdsx0BundleUseTable
table.1.3.6.1.4.1.9.10.33.1.2.1
·
1 row entry
·
1 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cdsx0BundleUseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS0BUNDLE-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS0BUNDLE-EXT-MIB::cdsx0BundleUseTable'
Shows the ds0 timeslots that are currently in
use (i.e., part of a ds0 bundle) on
channelized DS1 lines.
There is an entry in this table for each
channelized DS1 line which has an ifEntry.
Contains the ds0 timeslots that are currently
part of various ds0 bundles on the DS1 line
identified by the ifIndex.
This information can be useful for an NMS when
creating new ds0 bundles on this DS1.
part of various ds0 bundles on the DS1 line
identified by the ifIndex.
This information can be useful for an NMS when
creating new ds0 bundles on this DS1.
| Column | Syntax | OID |
|---|---|---|
|
A list of ds0 timeslots on this DS1 line that
are currently in use, i.e., are part of some ds0 bundle. |
Ds0ChannelList Type Constraints: range: 0..4 |
.1.3.6.1.4.1.9.10.33.1.2.1.1.1 |