CISCO-DIAMETER-BASE-PROTOCOL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
112

cdbpLocalIpAddrTable

table
.1.3.6.1.4.1.9.10.133.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpLocalIpAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpLocalIpAddrTable' 
The table listing the Diameter
local host's IP Addresses.
cdbpLocalIpAddrEntry row .1.3.6.1.4.1.9.10.133.1.1.2.1
A row entry representing a Diameter
local host IP Address.
Indexes
Column Syntax OID
cdbpLocalIpAddrIndex
A number uniquely identifying the number
of IP Addresses supported by this Diameter
host.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.1.2.1.1
cdbpLocalIpAddrType
The type of internet address stored
in cdbpLocalIpAddress.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.133.1.1.2.1.2
cdbpLocalIpAddress
The IP-Address of the host, which is of the type
specified in cdbpLocalIpAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.133.1.1.2.1.3

cdbpLocalApplTable

table
.1.3.6.1.4.1.9.10.133.1.1.10 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpLocalApplTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpLocalApplTable' 
The table listing the Diameter applications
supported by this server.
cdbpLocalApplEntry row .1.3.6.1.4.1.9.10.133.1.1.10.1
A row entry representing a Diameter
application on this server.
Indexes
Column Syntax OID
cdbpLocalApplIndex
A number uniquely identifying a
supported Diameter application. Upon reload,
cdbpLocalApplIndex values may be changed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.1.10.1.1
cdbpLocalApplStorageType
The storage type for this conceptual row. None of
the columnar objects is writable when the conceptual
row is permanent.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.9.10.133.1.1.10.1.2
cdbpLocalApplRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).

Until instances of all corresponding columns a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.133.1.1.10.1.3

cdbpLocalVendorTable

table
.1.3.6.1.4.1.9.10.133.1.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpLocalVendorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpLocalVendorTable' 
The table listing the vendor IDs
supported by local Diameter.
cdbpLocalVendorEntry row .1.3.6.1.4.1.9.10.133.1.1.11.1
A row entry representing a
vendor ID supported by local Diameter.
Indexes
Column Syntax OID
cdbpLocalVendorIndex
A number uniquely identifying the vendor
ID supported by local Diameter. Upon reload,
cdbpLocalVendorIndex values may be changed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.1.11.1.1
cdbpLocalVendorId
The active vendor ID used for peer connections.
diameterVendorIetf(0) - Diameter vendor
id ietf
diameterVendorCisco(9) - Diameter vendor
id …
Enumerationr/w
Enumerated Values:
0diameterVendorIetf
9diameterVendorCisco
10415diameterVendor3gpp
12645diameterVendorVodafone
 .1.3.6.1.4.1.9.10.133.1.1.11.1.2
cdbpLocalVendorStorageType
The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.9.10.133.1.1.11.1.3
cdbpLocalVendorRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).

Until instances of all corresponding columns a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.133.1.1.11.1.4

cdbpAppAdvToPeerTable

table
.1.3.6.1.4.1.9.10.133.1.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpAppAdvToPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpAppAdvToPeerTable' 
The table listing the applications advertised by
this host to each peer and the types of service
supported: accounting, authentication or both.
cdbpAppAdvToPeerEntry row .1.3.6.1.4.1.9.10.133.1.1.12.1
A row entry representing a discovered or
configured Diameter peer server.
Indexes
Column Syntax OID
cdbpAppAdvToPeerVendorId
The IANA Enterprise Code value assigned to
the vendor of the Diameter device.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.1.12.1.1
cdbpAppAdvToPeerIndex
A number uniquely identifying the Diameter
applications advertised as supported by
this host to each peer. Upon reload,
cdbpAppAdvToPeerIndex values may be changed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.1.12.1.2
cdbpAppAdvToPeerServices
The type of services supported for each application,
accounting, authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication.
Enumeration
Enumerated Values:
1acct
2auth
3both
 .1.3.6.1.4.1.9.10.133.1.1.12.1.3
cdbpAppAdvToPeerStorageType
The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.9.10.133.1.1.12.1.4
cdbpAppAdvToPeerRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).

Until instances of all corresponding columns a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.133.1.1.12.1.5

cdbpPeerTable

table
.1.3.6.1.4.1.9.10.133.1.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpPeerTable' 
The table listing information regarding
the discovered or configured Diameter
peer servers.
cdbpPeerEntry row .1.3.6.1.4.1.9.10.133.1.3.1.1
A row entry representing a discovered
or configured Diameter peer server.
Indexes
Column Syntax OID
cdbpPeerIndex
A number uniquely identifying each Diameter peer
with which the host server communicates. Upon reload,
cdbpPeerIndex values may be changed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.3.1.1.1
cdbpPeerId
The server identifier for the Diameter peer. It must
be unique and non-empty.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.133.1.3.1.1.2
cdbpPeerPortConnect
The connection port this server used
to connect to the Diameter peer.
If there is no active connection, this
value will be zero(0).
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.133.1.3.1.1.3
cdbpPeerPortListen
The port the server is listening on.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.10.133.1.3.1.1.4
cdbpPeerProtocol
The transport protocol (tcp/sctp) the
Diameter peer is using.
tcp(1) - Transmission Control Protocol
sctp(2) - Stream Control Transmission Protocol.
Enumeration
Enumerated Values:
1tcp
2sctp
 .1.3.6.1.4.1.9.10.133.1.3.1.1.5
cdbpPeerSecurity
The security the Diameter peer is using.
other(1) - Unknown Security Protocol.
tls(2) - Transport Layer Security Protocol.
ipsec(3) - Internet Protocol Security.
Enumeration
Enumerated Values:
1other
2tls
3ipsec
 .1.3.6.1.4.1.9.10.133.1.3.1.1.6
cdbpPeerFirmwareRevision
Firmware revision of peer. If no firmware
revision, the revision of the Diameter software
module may be reported instead.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.3.1.1.7
cdbpPeerStorageType
The storage type for this conceptual row.
Only cdbpPeerPortListen object is writable when the
conceptual row is permanent.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.9.10.133.1.3.1.1.8
cdbpPeerRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).

Until instances of all corresponding columns a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.133.1.3.1.1.9

cdbpPeerIpAddrTable

table
.1.3.6.1.4.1.9.10.133.1.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpPeerIpAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpPeerIpAddrTable' 
The table listing the Diameter
server IP Addresses.
cdbpPeerIpAddrEntry row .1.3.6.1.4.1.9.10.133.1.3.2.1
A row entry representing peer
Diameter server IP Addresses.
Indexes
Column Syntax OID
cdbpPeerIpAddressIndex
A number uniquely identifying the number
of IP Addresses supported by all Diameter
peers.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.3.2.1.1
cdbpPeerIpAddressType
The type of address stored in
diameterPeerIpAddress.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.133.1.3.2.1.2
cdbpPeerIpAddress
The active IP Address(es) used for connections.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.133.1.3.2.1.3

cdbpAppAdvFromPeerTable

table
.1.3.6.1.4.1.9.10.133.1.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpAppAdvFromPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpAppAdvFromPeerTable' 
The table listing the applications advertised by
each peer to this host and the types of service
supported: accounting, authentication or both.
cdbpAppAdvFromPeerEntry row .1.3.6.1.4.1.9.10.133.1.3.3.1
A row entry representing a discovered or
configured Diameter peer server.
Indexes
Column Syntax OID
cdbpAppAdvFromPeerVendorId
The IANA Enterprise Code value assigned to
the vendor of the Diameter device.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.3.3.1.1
cdbpAppAdvFromPeerIndex
A number uniquely identifying the applications
advertised as supported from each Diameter peer.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.3.3.1.2
cdbpAppAdvFromPeerType
The type of services supported for each application,
accounting, authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication.
Enumeration
Enumerated Values:
1acct
2auth
3both
 .1.3.6.1.4.1.9.10.133.1.3.3.1.3

cdbpPeerVendorTable

table
.1.3.6.1.4.1.9.10.133.1.3.4 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpPeerVendorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpPeerVendorTable' 
The table listing the Vendor IDs
supported by the peer.
cdbpPeerVendorEntry row .1.3.6.1.4.1.9.10.133.1.3.4.1
A row entry representing a
Vendor ID supported by the peer.
Indexes
Column Syntax OID
cdbpPeerVendorIndex
A number uniquely identifying the Vendor
ID supported by the peer. Upon reload,
cdbpPeerVendorIndex values may be changed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.3.4.1.1
cdbpPeerVendorId
The active vendor ID used for peer connections.
diameterVendorIetf(0) - Diameter vendor
id ietf
diameterVendorCisco(9) - Diameter vendor
id …
Enumerationr/w
Enumerated Values:
0diameterVendorIetf
9diameterVendorCisco
10415diameterVendor3gpp
12645diameterVendorVodafone
 .1.3.6.1.4.1.9.10.133.1.3.4.1.2
cdbpPeerVendorStorageType
The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.9.10.133.1.3.4.1.3
cdbpPeerVendorRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).

Until instances of all corresponding columns a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.133.1.3.4.1.4

cdbpPeerStatsTable

table
.1.3.6.1.4.1.9.10.133.1.4.1 · 1 row entry · 50 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpPeerStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpPeerStatsTable' 
The table listing the Diameter peer statistics.
cdbpPeerStatsEntry row .1.3.6.1.4.1.9.10.133.1.4.1.1
A row entry representing a Diameter peer.
Indexes
Column Syntax OID
cdbpPeerStatsState
Connection state in the Peer State Machine of
the peer with which this Diameter server is
communicating.
closed(1) - Connection closed with this peer.
waitConnAck(2) - Waiting for an acknowledgment
…
Enumeration
Enumerated Values:
1closed
2waitConnAck
3waitICEA
4elect
5waitReturns
6rOpen
7iOpen
8closing
 .1.3.6.1.4.1.9.10.133.1.4.1.1.1
cdbpPeerStatsStateDuration
This object represents the Peer state duration.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.2
cdbpPeerStatsLastDiscCause
The last cause for a peers disconnection.
rebooting(1) - A scheduled reboot is imminent.
busy(2) - The peer's internal resources are
constrained, and it has determined
…
Enumeration
Enumerated Values:
1rebooting
2busy
3doNotWantToTalk
4election
 .1.3.6.1.4.1.9.10.133.1.4.1.1.3
cdbpPeerStatsWhoInitDisconnect
Did the host or peer initiate the disconnect?

host(1) - If this server initiated the disconnect.
peer(2) - If the peer with which this server was
connected initiated the disconnect.
Enumeration
Enumerated Values:
1host
2peer
 .1.3.6.1.4.1.9.10.133.1.4.1.1.4
cdbpPeerStatsDWCurrentStatus
This object indicates the connection status.
okay(1) - Indicates the connection is presumed working.
suspect(2) - Indicates the connection is possibly
congested or down.
down(3) - The peer is no longe…
Enumeration
Enumerated Values:
1okay
2suspect
3down
4reopen
 .1.3.6.1.4.1.9.10.133.1.4.1.1.5
cdbpPeerStatsTimeoutConnAtmpts
If there is no transport connection with a peer,
this is the number of times the server attempts
to connect to that peer. This is reset on
disconnection.
attemptsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.6
cdbpPeerStatsASRsIn
Abort-Session-Request messages received
from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.7
cdbpPeerStatsASRsOut
Abort-Session-Request messages
sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.8
cdbpPeerStatsASAsIn
Number of Abort-Session-Answer
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.9
cdbpPeerStatsASAsOut
Number of Abort-Session-Answer
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.10
cdbpPeerStatsACRsIn
Number of Accounting-Request messages
received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.11
cdbpPeerStatsACRsOut
Number of Accounting-Request messages
sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.12
cdbpPeerStatsACAsIn
Number of Accounting-Answer messages
received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.13
cdbpPeerStatsACAsOut
Number of Accounting-Answer messages
sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.14
cdbpPeerStatsCERsIn
Number of Capabilities-Exchange-Request
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.15
cdbpPeerStatsCERsOut
Number of Capabilities-Exchange-Request
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.16
cdbpPeerStatsCEAsIn
Number of Capabilities-Exchange-Answer
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.17
cdbpPeerStatsCEAsOut
Number of Capabilities-Exchange-Answer
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.18
cdbpPeerStatsDWRsIn
Number of Device-Watchdog-Request
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.19
cdbpPeerStatsDWRsOut
Number of Device-Watchdog-Request
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.20
cdbpPeerStatsDWAsIn
Number of Device-Watchdog-Answer
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.21
cdbpPeerStatsDWAsOut
Number of Device-Watchdog-Answer
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.22
cdbpPeerStatsDPRsIn
Number of Disconnect-Peer-Request messages
received.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.23
cdbpPeerStatsDPRsOut
Number of Disconnect-Peer-Request messages
sent.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.24
cdbpPeerStatsDPAsIn
Number of Disconnect-Peer-Answer messages
received.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.25
cdbpPeerStatsDPAsOut
Number of Disconnect-Peer-Answer messages
sent.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.26
cdbpPeerStatsRARsIn
Number of Re-Auth-Request messages
received.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.27
cdbpPeerStatsRARsOut
Number of Re-Auth-Request messages
sent.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.28
cdbpPeerStatsRAAsIn
Number of Re-Auth-Answer messages
received.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.29
cdbpPeerStatsRAAsOut
Number of Re-Auth-Answer messages
sent.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.30
cdbpPeerStatsSTRsIn
Number of Session-Termination-Request
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.31
cdbpPeerStatsSTRsOut
Number of Session-Termination-Request
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.32
cdbpPeerStatsSTAsIn
Number of Session-Termination-Answer
messages received from the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.33
cdbpPeerStatsSTAsOut
Number of Session-Termination-Answer
messages sent to the peer.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.34
cdbpPeerStatsDWReqTimer
Device-Watchdog Request Timer, which
is the interval between packets sent to
peers.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.35
cdbpPeerStatsRedirectEvents
Redirect Event count, which is the number
of redirects sent from a peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.36
cdbpPeerStatsAccDupRequests
The number of duplicate Diameter Accounting-Request
packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.37
cdbpPeerStatsMalformedReqsts
The number of malformed Diameter
packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.38
cdbpPeerStatsAccsNotRecorded
The number of Diameter Accounting-Request packets
which were received and responded to but not
recorded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.39
cdbpPeerStatsAccRetrans
The number of Diameter Accounting-Request packets
retransmitted to this Diameter server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.40
cdbpPeerStatsTotalRetrans
The number of Diameter packets retransmitted
to this Diameter server, not to include Diameter
Accounting-Request packets retransmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.41
cdbpPeerStatsAccPendReqstsOut
The number of Diameter Accounting-Request packets
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this server and decremented
due …
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.42
cdbpPeerStatsAccReqstsDropped
The number of Accounting-Requests to this server
that have been dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.43
cdbpPeerStatsHByHDropMessages
An answer message that is received with an unknown
hop-by-hop identifier. Does not include accounting
requests dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.44
cdbpPeerStatsEToEDupMessages
Duplicate answer messages that are to be locally
consumed. Does not include duplicate accounting
requests received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.45
cdbpPeerStatsUnknownTypes
The number of Diameter packets of unknown type
which were received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.46
cdbpPeerStatsProtocolErrors
This object represents the Number of protocol errors
returned to peer, but not including redirects.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.47
cdbpPeerStatsTransientFailures
This object represents the transient failure
count.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.48
cdbpPeerStatsPermanentFailures
This object represents the Number of permanent
failures returned to peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.49
cdbpPeerStatsTransportDown
This object represents the Number of unexpected
transport failures.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.4.1.1.50

cdbpRealmKnownPeersTable

table
.1.3.6.1.4.1.9.10.133.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpRealmKnownPeersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpRealmKnownPeersTable' 
The table listing the Diameter
realms and known peers.
cdbpRealmKnownPeersEntry row .1.3.6.1.4.1.9.10.133.1.5.1.1
A row entry representing a Diameter
realm and known peers.
Indexes
Column Syntax OID
cdbpRealmKnownPeersIndex
A number uniquely identifying a peer
known to this realm. Upon reload,
cdbpRealmKnownPeersIndex values may be changed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.5.1.1.1
cdbpRealmKnownPeers
The index of the peer this realm knows about.
This is an ordered list, where the ordering
signifies the order in which the peers are
tried. Same as the cdbpPeerIndex
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.5.1.1.2
cdbpRealmKnownPeersChosen
How the realm chooses which peer to send
packets to.
roundRobin(1) - The peer used for each transaction
is selected based on the order in
which peers are configure…
Enumeration
Enumerated Values:
1roundRobin
2loadBalance
3firstPreferred
4mostRecentFirst
5other
 .1.3.6.1.4.1.9.10.133.1.5.1.1.3

cdbpRealmMessageRouteTable

table
.1.3.6.1.4.1.9.10.133.1.6.1 · 1 row entry · 25 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cdbpRealmMessageRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAMETER-BASE-PROTOCOL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAMETER-BASE-PROTOCOL-MIB::cdbpRealmMessageRouteTable' 
The table listing the Diameter
realm-based message route information.
cdbpRealmMessageRouteEntry row .1.3.6.1.4.1.9.10.133.1.6.1.1
A row entry representing a Diameter
realm based message route server.
Indexes
Column Syntax OID
cdbpRealmMessageRouteIndex
A number uniquely identifying each realm.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.1
cdbpRealmMessageRouteRealm
This object represents the realm name
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.133.1.6.1.1.2
cdbpRealmMessageRouteApp
Application id used to route packets
to this realm.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.3
cdbpRealmMessageRouteType
The types of service supported for each
realm application: accounting,
authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication.
Enumeration
Enumerated Values:
1acct
2auth
3both
 .1.3.6.1.4.1.9.10.133.1.6.1.1.4
cdbpRealmMessageRouteAction
The action is used to identify how a
message should be treated based on the realm,
application and type.
local(1) - Diameter messages that resolve to a
route entry with the Local Action set to
…
Enumeration
Enumerated Values:
1local
2relay
3proxy
4redirect
 .1.3.6.1.4.1.9.10.133.1.6.1.1.5
cdbpRealmMessageRouteACRsIn
Number of Accounting-Request messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.6
cdbpRealmMessageRouteACRsOut
Number of Accounting-Request messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.7
cdbpRealmMessageRouteACAsIn
Number of Accounting-Answer messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.8
cdbpRealmMessageRouteACAsOut
Number of Accounting-Answer messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.9
cdbpRealmMessageRouteRARsIn
Number of Re-Auth-Request messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.10
cdbpRealmMessageRouteRARsOut
Number of Re-Auth-Request messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.11
cdbpRealmMessageRouteRAAsIn
Number of Re-Auth-Answer messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.12
cdbpRealmMessageRouteRAAsOut
Number of Re-Auth-Answer messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.13
cdbpRealmMessageRouteSTRsIn
Number of Session-Termination-Request messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.14
cdbpRealmMessageRouteSTRsOut
Number of Session-Termination-Request messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.15
cdbpRealmMessageRouteSTAsIn
Number of Session-Termination-Answer messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.16
cdbpRealmMessageRouteSTAsOut
Number of Session-Termination-Answer messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.17
cdbpRealmMessageRouteASRsIn
Number of Abort-Session-Request messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.18
cdbpRealmMessageRouteASRsOut
Number of Abort-Session-Request messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.19
cdbpRealmMessageRouteASAsIn
Number of Abort-Session-Answer messages
received from the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.20
cdbpRealmMessageRouteASAsOut
Number of Abort-Session-Answer messages
sent to the realm.
messagesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.21
cdbpRealmMessageRouteAccRetrans
The number of Diameter accounting packets
retransmitted to this realm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.22
cdbpRealmMessageRouteAccDupReqsts
The number of duplicate Diameter accounting
packets sent to this realm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.23
cdbpRealmMessageRoutePendReqstsOut
The number of Diameter Accounting-Request packets
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this server and decremented
due …
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.24
cdbpRealmMessageRouteReqstsDrop
The number of requests dropped by this realm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.133.1.6.1.1.25