CISCO-DHCP-SNOOPING-MIB Table View

A table provides the mechanism to control DHCP Snooping
per VLAN. When a VLAN is created in a device supporting this
table, a corresponding entry of this table will be added.

cdsVlanConfigEntry row .1.3.6.1.4.1.9.9.380.1.2.1.1

A row instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.

Indexes

cdsVlanIndex

Column	Syntax	OID
cdsVlanIndex This object indicates the VLAN number on which DHCP Snooping feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.380.1.2.1.1.1
cdsVlanDhcpSnoopingEnable This object indicates whether DHCP Snooping is enabled in this VLAN. If this object is set to 'true', DHCP Snooping is enabled. If this object is set to 'false', DHCP Snooping is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.380.1.2.1.1.2
cdsVlanDhcpSnoopingOperStatus This object indicates whether DHCP Snooping is operational in this VLAN. If this object is 'operational', DHCP Snooping is running. If this object is 'notOperational', DHCP Snooping is no…	Enumeration Enumerated Values: 1 operational 2 notOperational	.1.3.6.1.4.1.9.9.380.1.2.1.1.3

A table provides the mechanism to configure the trust
state for DHCP Snooping purpose at each interface
capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).

cdsIfConfigEntry row .1.3.6.1.4.1.9.9.380.1.3.1.1

A row instance contains the configuration to enable
or disable trust state for DHCP Snooping at each
interface capable of this feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cdsIfTrustEnable This object indicates whether the interface is trusted for DHCP Snooping purpose. If this object is set to 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded withou…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.380.1.3.1.1.1

A table provides the mechanism to configure the rate limit
for DHCP Snooping purpose at each interface capable
of this feature. Some of the interfaces (but not limited to)
for which this feature might be applicable are:
ifType = ethernetCsmacd(6).

cdsIfRateLimitEntry row .1.3.6.1.4.1.9.9.380.1.3.2.1

A row instance contains the configuration of rate limit
DHCP Snooping at each interface capable of this
feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cdsIfRateLimit This object indicates rate limit value for DHCP Snooping purpose. If the value of this object is 0, no rate limit is applied for DHCP traffic at this interface.	packets per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.380.1.3.2.1.1

A table provides the mechanism to enable or disable
DHCP Snooping feature at each interface capable of this
feature. Some of the interfaces (but not limited to) for
which this configuration might be applicable are: 
ifType = ethernetCsmacd(6).

cdsIfFeatureConfigEntry row .1.3.6.1.4.1.9.9.380.1.3.3.1

A row instance contains the configuration to enable
or disable DHCP Snooping at each interface capable of this
feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cdsIfFeatureEnable This object indicates whether the DHCP Snooping feature is enabled at this interface. If this object is set to 'true', DHCP Snooping is enabled. If this object is set to 'false', DHCP Sn…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.380.1.3.3.1.1

A table provides the mechanism to configure the binding limit
for DHCP Snooping purpose at each interface capable of
this feature. Some of the interfaces (but not limited to)
for which this feature might be applicable are:
ifType = ethernetCsmacd(6).

cdsIfBindingsLimitEntry row .1.3.6.1.4.1.9.9.380.1.3.4.1

A row instance contains the configuration of binding limit at
each interface capable of this feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cdsIfBindingsLimit This object specifies the maximum number of DHCP bindings allowed on this interface. This objects value will limit the number of entries in cdsBindingsTable and cdsStaticBindingsTable. The sum of all instances' value o…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.380.1.3.4.1.1

Each entry in this table represent circuit-id information,
configured on per port per vlan.

cdsIfVlanRelayInfoOptCircuitIdEntry row .1.3.6.1.4.1.9.9.380.1.3.5.1

Entry contains circuit-id information for a particular interface
and VLAN.

Indexes

IF-MIBifIndex cdsIfVlan

Column	Syntax	OID
cdsIfVlan This object indicates the VLAN on which circuit-id is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.380.1.3.5.1.1
cdsIfVlanRelayInfoOptCircuitId This object specifies circuit-id used in Agent Circuit ID sub-option of the DHCP relay information option (option 82) data inserted to DHCP packets by DHCP Snooping feature. The value of this object is …	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.9.9.380.1.3.5.1.2
cdsIfVlanRelayInfoOptCircuitIdStatus This object is used to manage the creation and deletion of rows in this table. It only supports 'active(1)', 'destroy(6)' and 'createAndGo(4)' value. Entry in this table gets created by setting cdsIfVla…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.380.1.3.5.1.3
cdsIfVlanRelayInfoOptCircuitIdDirect This object specifies to ignore the length and type in Agent Circuit ID sub-option of the DHCP relay information option (option 82) data inserted to DHCP packets by DHCP Snooping feature. The value of t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.380.1.3.5.1.4

A table provides the DHCP bindings information learnt by
the device.

cdsBindingsEntry row .1.3.6.1.4.1.9.9.380.1.4.1.1

A row instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time, and
status of this instance.

Indexes

cdsBindingsVlan cdsBindingsMacAddress

Column	Syntax	OID
cdsBindingsVlan This object indicates the VLAN to which a DHCP client host belongs.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.380.1.4.1.1.1
cdsBindingsMacAddress This object indicates the MAC address of a DHCP client host.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.380.1.4.1.1.2
cdsBindingsAddrType This object indicates the type of IP address denoted in cdsBindingsIpAddress object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.380.1.4.1.1.3
cdsBindingsIpAddress This object indicates the allocated IP address of a DHCP client host.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.380.1.4.1.1.4
cdsBindingsInterface This object indicates the interface where a DHCP client host connects to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.380.1.4.1.1.5
cdsBindingsLeasedTime This object indicates the leased time of this DHCP bindings.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.380.1.4.1.1.6
cdsBindingsStatus This object is used to manage the deletion of rows in this table. This object only supports active(1) and destroy(6) value. Whenever a DHCP binding is learnt by the device, an entry will be created by th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.380.1.4.1.1.7
cdsBindingsHostname This object indicates the host name of the DHCP client as denoted by DHCP option 12 field. An empty string indicates absence of option 12 in DHCP packet.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.380.1.4.1.1.8

A table provides the DHCP bindings information configured
by (local or network) management.

cdsStaticBindingsEntry row .1.3.6.1.4.1.9.9.380.1.4.2.1

A row instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, and status of
this instance.

Indexes

cdsStaticBindingsVlan cdsStaticBindingsMacAddress

Column	Syntax	OID
cdsStaticBindingsVlan This object indicates the VLAN to which a DHCP client host belongs.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.380.1.4.2.1.1
cdsStaticBindingsMacAddress This object indicates the MAC address of a DHCP client host.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.380.1.4.2.1.2
cdsStaticBindingsAddrType This object indicates the type of IP address denoted in cdsStaticBindingsIpAddress object.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.380.1.4.2.1.3
cdsStaticBindingsIpAddress This object indicates the allocated IP address of a DHCP client host.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.380.1.4.2.1.4
cdsStaticBindingsInterface This object indicates the ifIndex value of the interface where a DHCP client host connects to.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.380.1.4.2.1.5
cdsStaticBindingsStatus This object is used to manage the creation and deletion of rows in this table. An entry can be created by setting the instance value of this object to 'createAndGo', and deleted by setting the instance value of this obj…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.380.1.4.2.1.6

A table provides the mechanism to enable or disable
IP Source Guard at each physical interface capable of
this feature. Some of the interfaces (but not limited to)
for which this feature might be applicable are:
ifType = ethernetCsmacd(6).
          
When DHCP Snooping is enabled at an interface, a list of
IP addresses is obtained through DHCP Snooping for this
particular interface. If IP Source Guard is enabled, only
traffic from these IP addresses is allowed to pass through
the interface.

cdsIfSrcGuardConfigEntry row .1.3.6.1.4.1.9.9.380.1.6.1.1

A row instance contains the configuration to enable
or disable IP Source Guard as well as the configuration
of the filter type at each physical interface capable
of IP Source Guard feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cdsIfSrcGuardEnabledeprecated This object indicates whether IP Source Guard is enabled at this interface. If this object is set to 'true', IP Source Guard is enabled. Traffic coming to this interface will be forwarded if it is from t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.380.1.6.1.1.1
cdsIfSrcGuardFilterType This object indicates the traffic filter type applied at this interface. 'disable' indicates that Source Guard feature is disabled. 'ip' indicates that Source Guard feature is enabled and …	Enumerationr/w Enumerated Values: 1 disable 2 ip 3 ipMac 4 strictIpMac	.1.3.6.1.4.1.9.9.380.1.6.1.1.2

A table provides the information on IP addresses used
for IP Source Guard purpose at each physical interface
capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).

cdsIfSrcGuardAddrEntry row .1.3.6.1.4.1.9.9.380.1.6.2.1

A row instance contains the IP address type and IP
address used for IP Source Guard purpose at each
physical interface capable of this feature.

Indexes

IF-MIBifIndex cdsIfSrcGuardIndex

Column	Syntax	OID
cdsIfSrcGuardIndex This object indicates the index of this entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.380.1.6.2.1.1
cdsIfSrcGuardAddrType This object indicates the type of IP address denoted in cdsIfSrcGuardAddress object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.380.1.6.2.1.2
cdsIfSrcGuardAddress This object indicates the IP address obtained at this interface through DHCP Snooping or statically configured.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.380.1.6.2.1.3
cdsIfSrcGuardIpFilterAction This object indicates the IP Source Guard action applied at this interface with respect to IP traffic. permitIpAddress(1) indicates that IP traffic coming from the IP address denoted by cdsIfSrcGuardAddre…	Enumeration Enumerated Values: 1 permitIpAddress 2 denyAllIpAddress	.1.3.6.1.4.1.9.9.380.1.6.2.1.4
cdsIfSrcGuardFilterMode This object indicates the Source Guard filter mode at this interface. active(1) indicates that the Source Guard feature is active at this interface. inactiveTrustPort(2) indicates that the …	Enumeration Enumerated Values: 1 active 2 inactiveTrustPort 3 inactiveNoSnoopingVlan	.1.3.6.1.4.1.9.9.380.1.6.2.1.5
cdsIfSrcGuardMacAddress This object indicates the MAC address for Source Guard purpose.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.380.1.6.2.1.6
cdsIfSrcGuardMacFilterAction This object indicates the Source Guard action applied at this interface with respect to MAC traffic. allowMacAddress(1) indicates that MAC traffic coming from the MAC address denoted by cdsIfSrcGuardMacAd…	Enumeration Enumerated Values: 1 allowMacAddress 2 denyAllMacAddresses 3 permitAllMacAddresses	.1.3.6.1.4.1.9.9.380.1.6.2.1.7
cdsIfSrcGuardVlansLow A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The mo…	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.9.9.380.1.6.2.1.8
cdsIfSrcGuardVlansHigh A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 2048 to 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063…	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.9.9.380.1.6.2.1.9