CISCO-CDL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
27
.1.3.6.1.4.1.9.10.88.1.1.1 · 1 row entry · 18 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coCdlIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CDL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CDL-MIB::coCdlIntfTable'
This table provides objects to configure and monitor CDL on an
Ethernet interface.
coCdlIntfEntry row .1.3.6.1.4.1.9.10.88.1.1.1.1
An entry in the CDL Interface Table, providing objects to
configure and monitor CDL on an Ethernet interface.

An entry exists for each CDL capable Ethernet interface.
Indexes
Column Syntax OID
Enables/disables CDL on this interface.
When this object is set to 'true', CDL is enabled on
this interface. When this object is set to 'false',
CDL is disabled on this interface.

When CDL is enabled, …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.10.88.1.1.1.1.1
When set to 'true', this object forces CDL Hop Terminating
behavior at this interface. A CDL Hop Terminating Network
Element terminates (generates in one direction and consumes in
another direction) hop-by-hop CDL Defec…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.10.88.1.1.1.1.2
This object indicates the current CDL defect indication
behavior of this network element, at this interface. A network
element can take on one of three roles at a CDL enabled
interface: Aggregate Path Terminating Networ…
CoCdlNodeBehavior
Type Values:
1endOfAggPath
2endOfHop
3cdlRegenerator
.1.3.6.1.4.1.9.10.88.1.1.1.1.3
This object reflects the current status of the CDL Defect
Indication bits received on this interface.
CoCdlAggDefectIndStatus
Type Values:
0hopByHopForwardDefect
1hopByHopBackwardDefect
2endToEndAggPathForwardDefect
.1.3.6.1.4.1.9.10.88.1.1.1.1.4
This object specifies the value of sysUpTime at the last time
there was a change in the value of
coCdlRxAggDefectIndCurrStatus.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.10.88.1.1.1.1.5
This object reflects the current status of the CDL Defect
Indication bits transmitted on this interface.
CoCdlAggDefectIndStatus
Type Values:
0hopByHopForwardDefect
1hopByHopBackwardDefect
2endToEndAggPathForwardDefect
.1.3.6.1.4.1.9.10.88.1.1.1.1.6
This object specifies the value of sysUpTime at the last time
there was a change in the value of
coCdlTxAggDefectIndCurrStatus.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.10.88.1.1.1.1.7
A CDL enabled interface can aggregate packet streams
(called elementary packet streams) from multiple interfaces.
CDL uses one or two octets to identify the elementary packet
stream that this packet belongs to (called …
CoCdlFlowIdentifierr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.10.88.1.1.1.1.8
A CDL enabled interface can aggregate packet streams
(called elementary packet streams) from multiple interfaces.
CDL uses one or two octets to identify the elementary packet
stream that this packet belongs to (called …
CoCdlFlowIdentifierr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.10.88.1.1.1.1.9
The number of CDL frames received with CDL Header CRC errors.

This object represents the lower word value of the counter
associated with the number of CDL header CRC errors
encountered in the receive dire…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.1.1.1.10
This object represents the higher word value of the counter
associated with the number of CDL Header CRC errors
encountered in the receive direction.

NOTE: The object coCdlRxHecError contains the lower 32…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.1.1.1.11
The number of CDL frames received with CDL Header CRC errors.

This is a High Capacity (64 bit) version of the
coCdlRxHeaderCRCError counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.10.88.1.1.1.1.12
This object counts the number of CDL Flow Identifier lookup
errors in the receive direction. When a CDL interface
multiplexes/demultiplexes more than one elementary packet
stream, it uses the flow identifier in the CDL …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.1.1.1.13
This object represents the higher word value of the counter
associated with the number of CDL Flow Identifier lookup errors
encountered in the receive direction.

NOTE: The object coCdlRxInvalidFlowID cont…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.1.1.1.14
This object counts the number of CDL Flow Identifier lookup
errors in the receive direction. When a CDL interface
multiplexes/demultiplexes more than one elementary packet
stream, it uses the flow identifier in the CDL …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.10.88.1.1.1.1.15
This object counts the number of packets received without
a CDL header on this interface. This counter is
incremented only when CDL is enabled on this interface.

This object represents the lower word v…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.1.1.1.16
This object represents the higher word value of the counter
associated with the number of packets received without a CDL
header on this interface.

NOTE: The object coCdlRxNonCdlPackets contains the lower …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.1.1.1.17
This object counts the number of packets received without
a CDL header on this interface. This counter is
incremented only when CDL is enabled on this interface.

This is a High Capacity (64 bit) version o…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.10.88.1.1.1.1.18
.1.3.6.1.4.1.9.10.88.1.2.1 · 1 row entry · 9 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coCdlFlowTermTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CDL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CDL-MIB::coCdlFlowTermTable'
This table contains objects used to manage logical or physical
interfaces representing elementary packet streams at the point
where the CDL path defect indications are terminated.
Typically, this is a point where the CDL Ethernet encapsulation
is applied and removed. This can also be a point between a part
of the CDL network that supports packet-by-packet multiplexing,
and a part of the CDL network that does not support
packet-by-packet multiplexing.
          
Several elementary packet streams (from multiple logical or
physical path terminating interfaces) may be multiplexed into
an aggregate packet stream before being transmitted out of this
network element, towards the rest of the CDL network.
          
  (1)   +---------------+
 ------>|\              | Aggregate CDL packet stream
   :    | +----------\  |
 ------>|-------------==|======> towards CDL network
   :    | +----------/  | (A)
 ------>|/              |
  (N)   +---------------+
          
In the figure above, interface 'A' aggregates the elementary
packet streams from interfaces '1' through 'N'. A row in this
table exists for each path terminating interface carrying an
elementary packet stream. In the figure above, these interfaces
are labeled '1' through 'N'.
          
The relationship between the aggregating interface 'A' and an
interface carrying an elementary packet stream is not specified
in this table. It could be derived from the ifstackTable, or
from a cross connect MIB supported by the platform, or from any
other means suitable to the platform.
coCdlFlowTermEntry row .1.3.6.1.4.1.9.10.88.1.2.1.1
An entry that contains objects used to manage a logical or
physical interface representing a single elementary packet
stream at the point where the CDL path defect indications are
terminated. Typically, this is a point …
Indexes
Column Syntax OID
This object specifies the flow identifier value received from
the CDL network that identifies this elementary packet stream
at this interface.

Note that if CDL is not enabled on this interface, this
repre…
CoCdlFlowIdentifierr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.10.88.1.2.1.1.1
This object specifies the flow identifier value set in CDL
packets in this elementary packet stream that are progressed
from this interface towards the CDL network.

Note that if CDL is not enabled on this…
CoCdlFlowIdentifierr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.10.88.1.2.1.1.2
This object reflects the current status of the CDL flow defect
indications received from the CDL network, at this interface.

Note that the end-to-end path forward defect indication is
implicit, i.e. it is…
CoCdlFlowDefectIndStatus
Type Values:
0endToEndPathImplicitFwdDefect
1endToEndPathBackwardDefect
.1.3.6.1.4.1.9.10.88.1.2.1.1.3
This object specifies the value of sysUpTime at the last time
there was a change in the value of
coCdlFromCdlNetFlowDICurrStatus.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.10.88.1.2.1.1.4
This object reflects the current status of the CDL flow defect
indications progressed towards the CDL network from this
interface.

Note that the end-to-end path forward defect indication is
implicit, i.e.…
CoCdlFlowDefectIndStatus
Type Values:
0endToEndPathImplicitFwdDefect
1endToEndPathBackwardDefect
.1.3.6.1.4.1.9.10.88.1.2.1.1.5
This object specifies the value of sysUpTime at the last time
there was a change in the value of
coCdlToCdlNetFlowDICurrStatus.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.10.88.1.2.1.1.6
This object represents the lower word value of the counter
that provides a count of Ethernet packets with CRC
errors, for an elementary packet stream, at the point where
the CDL header is removed. When Ethernet is used …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.2.1.1.7
This object represents the higher word value of the counter
that provides a count of Ethernet packets with CRC
errors, for an elementary packet stream, at the point where
the CDL header is removed. When Ethernet is used…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.10.88.1.2.1.1.8
This object provides a count of Ethernet packets with CRC
errors, for an elementary packet stream, at the point where
the CDL header is removed. When Ethernet is used as an
encapsulation for transport of non-Ethernet pr…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.10.88.1.2.1.1.9