CISCO-CAS-IF-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
180

ccasIfExtVoiceCfgTable

table
.1.3.6.1.4.1.9.9.314.1.1.1 · 1 row entry · 25 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtVoiceCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtVoiceCfgTable' 
The voice interface extended table defines the
parameters related to the configuration of voice interfaces
(DS0 group of DS1).
          
This table extends the ccasVoiceCfgTable.
          
Each table entry describes an instance of a voice interface
configuration (DS0 group of DS1) in a media gateway.
ccasIfExtVoiceCfgEntry row .1.3.6.1.4.1.9.9.314.1.1.1.1
Each entry represents a voice interface (DS0 group of
DS1) in a media gateway.
Indexes
No indexes recorded
Column Syntax OID
ccasIfExtVoiceCfgLifNumber
This object specifies the LIF (Logical InterFace) number
associated with this voice interface.

If this object is set to 0, this interface does not have
an associated LIF.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.314.1.1.1.1.1
ccasIfExtVoiceCfgCcntrlProfile
This object specifies the index of call control profile that
is used by this DS0 group.
If the value of ccasGrpCfgServiceType is 'mgcp(6)',
this is the index of cxeCallCtrlProfileTable.
If the value of ccasGrpCfgServic…
CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndexOrZeror/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.2
ccasIfExtVoiceCfgVadEnabled
The object specifies VAD (Voice Activity Detection)
is enabled for the compression DSPs of this interface.

The value of this object is 'false' if the voice
interface associated DS0 group uses null signal…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.314.1.1.1.1.3
ccasIfExtVoiceCfgContinuityTone1
The object specifies the first frequency tone to be
sent between the terminating and the originating gateways
in the continuity test.
HzUnsigned32r/w
Constraints:
range: 1-4000
 .1.3.6.1.4.1.9.9.314.1.1.1.1.4
ccasIfExtVoiceCfgContinuityTone2
The object specifies the second frequency tone to be
sent between the terminating and the originating gateways
in the continuity test.
HzUnsigned32r/w
Constraints:
range: 1-4000
 .1.3.6.1.4.1.9.9.314.1.1.1.1.5
ccasIfExtVoiceCfgModemPassThru
This object specifies the modem pass-through mode:

(1) passThruDisabled: Modem pass-through is disabled
(2) passThruCisco: Cisco Proprietary PV (Protocol
Violation) modem protoco…
Enumerationr/w
Enumerated Values:
1passThruDisabled
2passThruCisco
3passThruNse
4passThruNseAal2
5passThruCa
6passThruTypeE
7system
8passThruNseCa
 .1.3.6.1.4.1.9.9.314.1.1.1.1.6
ccasIfExtVoiceCfgUpspeedCodec
This object specifies the CODEC type to use for modem upspeed.
Upspeed is to change the transmission rate of the voice
interface to a higher rate of CODEC type.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRater/w
Type Values:
1other
2fax2400
3fax4800
4fax7200
5fax9600
6fax14400
7fax12000
10g729r8000
11g729Ar8000
12g726r16000
13g726r24000
14g726r32000
15g711ulawr64000
16g711Alawr64000
17g728r16000
18g723r6300
19g723r5300
20gsmr13200
21g729Br8000
22g729ABr8000
23g723Ar6300
24g723Ar5300
25ietfg729r8000
26gsmeEr12200
27clearChannel
28g726r40000
29llcc
30gsmAmrNb
31g722
32iLBC
33iLBCr15200
34iLBCr13330
35g722r4800
36g722r5600
37g722r6400
38iSAC
39aaclc
40aacld
 .1.3.6.1.4.1.9.9.314.1.1.1.1.7
ccasIfExtVoiceCfgT38MaxFaxTxRatedeprecated
This object specifies the maximum FAX relay transmission
rate.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRater/w
Type Values:
1none
2voiceRate
3fax2400
4fax4800
5fax7200
6fax9600
7fax14400
8fax12000
 .1.3.6.1.4.1.9.9.314.1.1.1.1.8
ccasIfExtVoiceCfgT38HsPktPerioddeprecated
This object specifies the period of time for primary high
speed (HS) data packet.
microsecondsCISCO-VOICE-AALX-PROFILE-MIBCiscoCodecPacketPeriodr/w
Type Values:
1pktPeriod5000us
2pktPeriod5500us
3pktPeriod5785us
4pktPeriod10000us
5pktPeriod15000us
6pktPeriod20000us
7pktPeriod25000us
8pktPeriod30000us
9pktPeriod35000us
10pktPeriod40000us
11pktPeriod45000us
12pktPeriod50000us
13pktPeriod55000us
14pktPeriod60000us
15pktPeriod65000us
16pktPeriod70000us
17pktPeriod75000us
18pktPeriod80000us
19pktPeriod85000us
20pktPeriod90000us
 .1.3.6.1.4.1.9.9.314.1.1.1.1.9
ccasIfExtVoiceCfgT38HsRedundancydeprecated
The object specifies the number of redundant FAX packets
for Internet FAX protocol (IFP) packet transmission.
The value of '0' indicates that no redundant Internet
FAX packets will be transmitted during the T.38 FAX …
FAX packetsUnsigned32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.9.9.314.1.1.1.1.10
ccasIfExtVoiceCfgRepetition
This object is used to repeatedly apply the writable objects
of ccasIfExtVoiceCfgTable specified in the same SNMP PDU
starting from the row specifies by the index of the instance
for the number of rows specified in thi…
CISCO-TCConfigIteratorr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.314.1.1.1.1.11
ccasIfExtVoiceCfgBulkCfgOwner
This object is used for error checking of the operation
specified in ccasIfExtVoiceCfgRepetition.

The value of this object is set by the SNMP manager
with its own identifier at the same time as issuing th…
RMON-MIBOwnerStringr/w
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.9.9.314.1.1.1.1.12
ccasIfExtVoiceCfgBulkCfgResult
This object is used for error checking of the operation
specified in ccasIfExtVoiceCfgRepetition.

This object indicates the result of the bulk configuration
initiated by the SNMP manager specified in the …
CISCO-TCBulkConfigResult
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.314.1.1.1.1.13
ccasIfExtVoiceCfgVadTimer
This object specifies the hangover time for VAD.

Once the voice inactivity is detected, gateway will wait
for this duration before activating silence suppression.
millisecondsInteger32r/w
Constraints:
range: 250-65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.14
ccasIfExtVoiceCfgICSEnable
This object specifies whether the Idle Channel suppression
(ICS) is enabled for an AAL2 connection.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.314.1.1.1.1.15
ccasIfExtVoiceCfgICSIntTimer
This object specifies a timeout value for ICS integration
timer. This timer is started once channel idle is detected.
When the timer is expired, the gateway will stop transmitting
bearer data to network. Instead, the CA…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.16
ccasIfExtVoiceCfgTonePlan
This object specifies which tone plan the DS0 group is
using for playing the tones.
CISCO-MEDIA-GATEWAY-MIBCVoiceTonePlanIndexOrZeror/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.17
ccasIfExtVoiceCfgGwyLinkId
This object specifies the H.248 media gateway link
that this DS0 group belongs to.
This object is applicable only if the value of
ccasGrpCfgServiceType is 'h248(9)'.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.314.1.1.1.1.18
ccasIfExtVoiceCfgH248PkgIds
This object specifies the H.248 packages supported in
this DS0 group.
This object is applicable only if the value of
ccasGrpCfgServiceType is 'h248(9)'.
CISCO-MEGACO-EXT-MIBCH248Packagesr/w
Type Values:
0pkgG
1pkgRoot
2pkgToneGen
3pkgToneDet
4pkgDG
5pkgDD
6pkgCG
7pkgCD
8pkgCT
9pkgNT
10pkgRTP
11pkgTDMC
12pkgAN
13pkgBCG
14pkgXCG
15pkgSrvTn
16pkgXsrvTn
17pkgChp
18pkgIT
19pkgLLTR
20pkgBCAS
21pkgRBS
22pkgOSES
23pkgAMET
24pkgBCASAddr
25pkgCASBlock
26pkgGRI
27rtcpxr
28xrbm
29qac
30pkgDS
31pkgETerm
32pkgXnq
33pkgCTYP
34pkgIPFAX
 .1.3.6.1.4.1.9.9.314.1.1.1.1.19
ccasIfExtVoiceCfgEventMappingIdx
This object specifies the action of the voice band data
signal events handling in this DS0 group.
The real-time detected voice band data events are categorized
by VoiceBandDataEventType defined in
CISCO-VOICEBAND-DAT…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.20
ccasIfExtVoiceCfgGatewayIndex
This object specifies the media gateway index that
this DS0 group belong to.
The value of this object is cmgwIndex in cMediaGwTable.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.314.1.1.1.1.21
ccasIfExtVoiceCfgCasProfile
This object specifies the index of CAS profile that
is used by this DS0 group. The value of this object
is ccasProfileIndex in ccasIfExtProfileTable.
This object is applicable only when the DS0 group is
in a DS1 line wh…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.22
ccasIfExtVoiceCfgCasVariant
This object specifies the index of CAS variant that
is used by this DS0 group. The value of this object
is the same as the value of ccasVariantIndex in
ccasIfExtVariantTable.

This object is applicable o…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.1.1.1.23
ccasIfExtVoiceCfgDs0ChannelsFail
This object contains the bit map of the failure DS0
channels in the DS0 group.
The MSB (most significant bit) is DS0 channel number 1.
For T1, only higher 24 bits are used to specify the
the CAS channels for the CAS gr…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.9.9.314.1.1.1.1.24
ccasIfExtVoiceCfgNoiseRegType
This object specifies the type of comfort noise generation:

(1) none: No comfort noise generation
(2) simple: Cisco Proprietary comfort noise generation
(3) g711A2: ITU G.711 Appendix II compliant
…
Enumerationr/w
Enumerated Values:
1none
2simple
3g711A2
 .1.3.6.1.4.1.9.9.314.1.1.1.1.25

ccasIfExtDs0GrpCfgTable

table
.1.3.6.1.4.1.9.9.314.1.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtDs0GrpCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtDs0GrpCfgTable' 
The voice interface extended table defines the
parameters related to the configuration of voice interfaces
(DS0 group of DS1).
          
This table extends the ccasVoiceCfgTable.
          
Each table entry describes an instance of a voice interface
configuration (DS0 group of DS1) in a media gateway.
ccasIfExtDs0GrpCfgEntry row .1.3.6.1.4.1.9.9.314.1.1.3.1
Each entry represents a DS0 group interface.
Indexes
No indexes recorded
Column Syntax OID
ccasIfExtDs0GrpRepetition
This object is used to repeatedly apply the writable objects
of ccasIfExtDs0GrpCfgTable specified in the same SNMP PDU
starting from the row specifies by the index of the instance
for the number of rows specified in thi…
CISCO-TCConfigIteratorr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.314.1.1.3.1.1
ccasIfExtDs0GrpRepeatOwner
This object is used for error checking of the operation
specified in ccasIfExtDs0GrpRepetition.

The value of this object is set by the SNMP manager
with its own identifier at the same time as issuing the …
RMON-MIBOwnerStringr/w
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.9.9.314.1.1.3.1.2
ccasIfExtDs0GrpRepeatResult
This object is used for error checking of the operation
specified in ccasIfExtDs0GrpRepetition.

This object indicates the result of the repetition
initiated by the SNMP manager specified in the value of
c…
CISCO-TCBulkConfigResult
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.314.1.1.3.1.3

ccasIfExtProfileTable

table
.1.3.6.1.4.1.9.9.314.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtProfileTable' 
This table specifies a list of CAS profiles. Each CAS profile
consists of the configurable CAS attributes related to: 
. Line signal timers table, ccasIfExtLineSignalTimerTable.
. Register signals table, ccasIfExtRegisterSignalTable.
. Register signal timers table, ccasIfExtRegSignalTimerTable.
. General configurations table, ccasIfExtGeneralConfigTable.
          
A CAS profile can be applied to a DS0 group of the DS1 line
with CAS signaling. A DS1 line is configured for CAS signaling
when its dsx1SignalMode is set to 'robbedBit(2)' for T1 or 
'bitOriented(3)' for E1.
ccasIfExtProfileEntry row .1.3.6.1.4.1.9.9.314.1.2.1.1
Each entry represents a CAS profile in media gateway.
Indexes
Column Syntax OID
ccasProfileIndex
This object uniquely identifies the CAS profile.
The value of 1 specifies the default CAS profile in the
media gateway.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.2.1.1.1
ccasProfileLineSigTimer
This object specifies the attributes of CAS line
signaling timers indicated by ccasLSTIndex in
ccasIfExtLineSignalTimerTable.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.2.1.1.2
ccasProfileRegisterSignal
This object specifies the attributes of CAS register
signals indicated by ccasRSIndex in
ccasIfExtRegisterSignalTable.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.2.1.1.3
ccasProfileRegSigTimer
This object specifies the attributes of CAS register
signaling timers indicated by ccasRSTIndex in
ccasIfExtRegSignalTimerTable.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.2.1.1.4
ccasProfileGeneralCfg
This object specifies the general CAS attributes indicated
by ccasGCnfIndex in ccasIfExtGeneralConfigTable.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.2.1.1.5
ccasProfileRowStatus
When the entry is created, all the associated entries
indexed by the following objects must be existing:
ccasProfileLineSigTimer,
ccasProfileRegisterSignal,
ccasProfileRegSigTimer,
ccasProfileGeneralCfg…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.314.1.2.1.1.6

ccasIfExtVariantTable

table
.1.3.6.1.4.1.9.9.314.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtVariantTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtVariantTable' 
This table specifies a list of CAS signaling protocols such as
R2 CAS, Feature Group D Oprerator Services ( FGD OS). 
Each CAS variant is downloaded to and parsed by 
the media gateway.
A CAS variant can be applied to a DS0 group of the DS1
line with CAS signaling. A DS1 line is configured for CAS 
signaling when its dsx1SignalMode is set to 'robbedBit(2)' 
for T1 or 'bitOriented(3)' for E1.
ccasIfExtVariantEntry row .1.3.6.1.4.1.9.9.314.1.2.2.1
Each entry represents a CAS variant in media gateway.

Upon the creation of the entry, the CAS variant
specified by ccasVariantFile will be downloaded to
the media gateway. After the file is successfully pa…
Indexes
Column Syntax OID
ccasVariantIndex
An arbitrary value which uniquely identifies the CAS variant
in the media gateway.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.2.2.1.1
ccasVariantFile
This object specifies the valid file name with extension
'.o' stored on the media gateway's hard disk.
The CAS variant file can be transferred to the media
gateway via FTP text file transfer mechanism.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.9.314.1.2.2.1.2
ccasVariantSource
This object specifies the source from where the CAS
variant file must be fetched.
. internal: Value indicates that the file is built
into the firmware.
. external: Value indicates that the file is to be
downloa…
Enumerationr/w
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.9.9.314.1.2.2.1.3
ccasVariantNumberCount
This object indicates the number of DS0 groups of the DS1
line which are used for the CAS variant.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.314.1.2.2.1.4
ccasVariantState
This object indicates the configuration status of the
CAS variant.
. initInProgress: The state machine is being initialized.
. initSuccessfully: The state machine was initialized properly.
. initFailed: The intializat…
Enumeration
Enumerated Values:
1initInProgress
2initSuccessfully
3initFailed
 .1.3.6.1.4.1.9.9.314.1.2.2.1.5
ccasVariantRowStatus
When the entry is created, the ccasVariantFile object is
mandatory.
The entry can be added or deleted, but not modified by
the manager.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.314.1.2.2.1.6

ccasIfExtIncomingLineSignalTable

table
.1.3.6.1.4.1.9.9.314.1.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtIncomingLineSignalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtIncomingLineSignalTable' 
This table defines the parameters related to the incoming 
line signals for CAS variant. 
The appropriate signal definitions from this table will 
be downloaded to the media gateway. The media gateway will 
use the information provided in this table to match the 
incoming bit pattern to a particular signal.
ccasIfExtIncomingLineSignalEntry row .1.3.6.1.4.1.9.9.314.1.3.1.1
Each entry represents an incoming line signal definition
for the CAS variant corresponding to the CAS Variant index.
Entries in this table are implicitly created when a CAS
variant file is parsed when an entry is crea…
Indexes
Column Syntax OID
ccasILSSignalNameIndex
This object specifies the Signal Name index for the various
CAS line signals.
This object along with the cmgwIndex and ccasVariantIndex
identify an unique entry in this table.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.3.1.1.2
ccasILSSignalName
This object indicates CAS signal name corresponding to the
ccasILSSignalNameIndex.
The media gateway uses ccasILSRxPattern along with following
objects:
ccasILSMatchedRxPattern
ccasILSMatchedTxPattern
ccasILSMinMakeT…
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.9.314.1.3.1.1.3
ccasILSRxPattern
This object indicates the ABCD bit pattern of the signal
being received on the DS0.
CASLineSignal
Type Constraints:
range: 1
 .1.3.6.1.4.1.9.9.314.1.3.1.1.4
ccasILSMatchedRxPattern
This object indicates the previous matched ABCD bit pattern
that was received on the DS0.
CASLineSignal
Type Constraints:
range: 1
 .1.3.6.1.4.1.9.9.314.1.3.1.1.5
ccasILSMatchedTxPattern
This object indicates the current ABCD bit pattern being
transmitted on the DS0.
CASLineSignal
Type Constraints:
range: 1
 .1.3.6.1.4.1.9.9.314.1.3.1.1.6
ccasILSMinMakeTime
This object specifies the minimum time for which the received
pattern (ccasILSRxPattern) must persist to be considered
a valid state change or transition.
If the state change lasts for less than this time, it does
not…
millisecondsUnsigned32r/w
Constraints:
range: 2-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.1.1.7
ccasILSMaxMakeTime
This object specifies the maximum time for which the Rx
pattern (ccasILSRxPattern) must persist to be considered
a valid state change or transition.
The value of 0 indicates there is no maximum make time
for this sig…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.1.1.8
ccasILSMinBreakTime
This object specifies the minimum time for which the ABCD
bit pattern being received on the line, and should go back
to its original signal pattern after the make pattern has
been asserted.
The value of 0 indicates …
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.1.1.9
ccasILSMaxBreakTime
This object specifies the maximum time for which the ABCD
bit pattern being received on the line, and go back to its
original signal pattern after the make pattern has been
asserted.
The value of 0 indicates there i…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.1.1.10

ccasIfExtOutgoingLineSignalTable

table
.1.3.6.1.4.1.9.9.314.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtOutgoingLineSignalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtOutgoingLineSignalTable' 
This table defines the parameters related to for the 
outgoing line signals pertaining to that CAS variant.
ccasIfExtOutgoingLineSignalEntry row .1.3.6.1.4.1.9.9.314.1.3.2.1
Each entry represents an incoming line signal definition
for the CAS variant corresponding to the CAS Variant index.
Entries in this table are implicitly created when a CAS
variant file is parsed when an entry is crea…
Indexes
Column Syntax OID
ccasOLSSignalNameIndex
This object specifies the Signal Name index for the various
CAS Line signals. This object along with the ccasVariantIndex
identify a unique entry in this table.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.3.2.1.1
ccasOLSCasSignalName
This object indicates outgoing CAS signal name.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.9.314.1.3.2.1.2
ccasOLSTxPattern
This object indicates the ABCD transmit bit pattern.
CASLineSignal
Type Constraints:
range: 1
 .1.3.6.1.4.1.9.9.314.1.3.2.1.3
ccasOLSMakeTime
This object specifies the time value for which the Tx Pattern
being transmitted.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.2.1.4
ccasOLSBreakTime
This object specifies the time value for which the pattern
being transmitted will switch to the original pattern before
the Tx pattern was asserted on the line.
The value of 0 indicates there is no break time for this…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.2.1.5

ccasIfExtLineSignalTimerTable

table
.1.3.6.1.4.1.9.9.314.1.3.3 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtLineSignalTimerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtLineSignalTimerTable' 
This table defines all timers related to the CAS Line 
signals.
ccasIfExtLineSignalTimerEntry row .1.3.6.1.4.1.9.9.314.1.3.3.1
Each entry represents a CAS Line Signal Timer in media
gateway.
Indexes
Column Syntax OID
ccasLSTIndex
An arbitrary index that uniquely identifies a
entry in the ccasIfExtLineSignalTimerTable.
The index 1 is reserved for the default entry.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.3.3.1.1
ccasLSTIdleGuardTimer
This object specifies the maximum amount of time MG will
wait for receipt of the idle signal on the line.
For T1 interfaces idle signal corresponds to on-hook
pattern on line.
For E1 interfaces idle signal corresponds …
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.2
ccasLSTClearFwdTimer
This object specifies the value of the timer that the GW
will start at the request of the controlling application
such as MGC for receipt of the clear forward signal on the
line.
This object is applied to R2 CAS.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.3
ccasLSTClearBwdTimer
This object specifies the value of the timer that the GW
will start at the request of the controlling application
such as MGC for receipt of the clear backward signal.
This object is applied to R2 CAS.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.4
ccasLSTReleaseGuardTimer
This object specifies the delay between reception of the
clear forward signal and the sending of the idle signal.
Upon reception of the clear forward signal, GW starts the
release guard timer. Upon expiry of this ti…
milllisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.5
ccasLSTCASGlareTimer
This object specifies the maximum amount of time MG will
wait for other end to back out when glare occurs on a DS0
line.
Change in incoming off-hook signal to on-hook signal
with-in this time frame indicates that o…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.6
ccasLSTAnswerMeterDelayTimer
The object specifies the delay between generation of the
answer signal and the generation of the meter signal.
The GW will start this timer after having sent the line
answer signal.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.7
ccasLSTCASDebounceTimer
This object specifies the amount of time for which the line
signal should persist to be valid.
The value of ccasLSTCASDebounceTimer must be less than or
equal the value of following objects:
ccasILSMinMakeTime, …
millisecondsUnsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.8
ccasLSTSeizeAckRspTimer
This object specifies the maximum amount of time MG will
wait for reception of seize ack signal.
Seize Ack signal is expected in response of seize signal.
This object is applied for both R2 CAS and non R2 CAS.
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.314.1.3.3.1.9
ccasLSTDelayBetRegAnsAndLineAns
This object specifies the timer that will be started
after register signaling completes successfully,
within which the answer line signal should be
received.
This applies to outgoing R2 registers.
The value of 0 ind…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.3.3.1.10
ccasLSTSeizeAckToDigitTimer
This object specifies the amount of time that the GW
should wait for the reception address digits after
sending seize ack signal.
The value of 0 indicates the timer will not be started
and MG would wait forever.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.3.3.1.11
ccasLSTRowStatus
This object is used for adding, deleting, and modifying
the entries from the ccasIfExtLineSignalTimerTable.
A default entry with index value 1 is created at
initialization, and it cannot be modified or deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.314.1.3.3.1.12

ccasIfExtRegisterSignalTable

table
.1.3.6.1.4.1.9.9.314.1.4.1 · 1 row entry · 67 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtRegisterSignalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtRegisterSignalTable' 
This table defines the signal to action definitions for the 
Register signals for R2 variant.
ccasIfExtRegisterSignalEntry row .1.3.6.1.4.1.9.9.314.1.4.1.1
Entries are configured per country.
When DS0 groups are associated with a CAS profile, it is
also associated with one of these entries if the CAS variant
is an R2 variant.
Entries are explicitly created modified an…
Indexes
Column Syntax OID
ccasRSIndex
This is an arbitrary index that uniquely identifies an
entry in this table. This parameter is mandatory when
creating an entry.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.4.1.1.1
ccasRSCountry
This object specifies the country where the meaning for
the signal definition/action applies.
This parameter is mandatory when creating an entry.
When the R2 country (ITU or other) is specified, the default
values fo…
CASCountryCoder/w
Type Values:
1itu
2argentina
3australia
4bolivia
5brazil
6bulgaria
7china
8colombia
9costaRica
10croatia
11eastEurope
12ecuadorIT
13ecuadorLME
14greece
15guatemala
16hongKong
17india
18indonesia
19israel
20korea
21laos
22malaysia
23malta
24mongolia
25newZealand
26paraguay
27peru
28philippines
29saudiArabia
30singapore
31southAfrica
32telemex
33telnor
34thailand
35uruguay
36venezuela
37vietnam
38bemilcom
 .1.3.6.1.4.1.9.9.314.1.4.1.1.2
ccasRSSubRegion
This object is used to describe a variation within a
particular country.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.314.1.4.1.1.3
ccasBwdRSNextDigitANI
This object specifies a backward signal requesting
transmission of the next ANI digit (n + 1) after
reception of digit n.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.4
ccasBwdRSNextDigitDNIS
This object specifies a backward signal requesting
transmission of the next DNIS digit (n + 1) after
reception of digit n.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.5
ccasBwdRSPrevDigit
This object specifies a backward signal requesting
transmission of the previous ANI or DNIS digit (n - 1)
after reception of digit n.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.6
ccasBwdRSXtoGroupBSignals
This object specifies a backward signal indicating that the
incoming R2 register at the incoming end needs no additional
address digit and is about to go over to transmission of a
Group B signal conveying information…
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.7
ccasBwdRSCongestion
This object specifies a backward signal indicating that:
. Congestion of national links.
. Congestion in selection stages of terminal international
or national exchanges.
. Occurrence of time-out or abnormal release …
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.8
ccasBwdRSCallingPartyCategory
This object specifies a backward signal requesting for a
calling party category information or a Group II signal.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.9
ccasBwdRSAddrCompleteGroupA
This object specifies a backward signal indicating that the
R2 register at the incoming end needs no additional digit,
but will not send Group B signals.
The call has to be charged on answer.
The default value is co…
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.10
ccasBwdRSPrevNminus2Digit
This object specifies a backward signal requesting the
sending of the ANI or DNIS digit (n - 2) after reception
of digit n.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.11
ccasBwdRSPrevNminus3Digit
This object specifies a backward signal requesting the
sending of the ANI or DNIS digit (n - 3) after reception
of digit n.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.12
ccasBwdRSCountryCode
This object specifies a backward signal requesting the
country code indicator.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.13
ccasBwdRSLangDiscr
This object specifies a backward signal requesting the
language digit or the discriminating digit.
. Operator assistance: requesting a language digit.
. Automatic call: requesting a discriminating digit.
The default…
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.14
ccasBwdRSNatureOfCircuit
This object specifies a backward signal requesting
information regarding the nature of the circuits involved
in the connection so far, i.e. satellite link or not.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.15
ccasBwdRSInfoEchoSuppressor
This object specifies a backward signal requesting
information regarding the nature of echo suppressor being
used in the connection.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.16
ccasBwdRSInternationalCongst
This object specifies a backward signal indicating:
. Congestion on international links.
. Congestion in selection stages at an international
transit exchange or at a terminal international exchange
and/or its out…
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.17
ccasBwdRSXtoGroupC
This object specifies a backward signal requesting switch
to reception of group C signals.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.18
ccasBwdRSRepeatLastDigit
This object specifies a backward signal requesting
resending of the last digit just sent out.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.19
ccasBwdRSRepeatCalledDigit
This object specifies a backward signal requesting for
out pulsing of the called digits or DNIS from beginning.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.20
ccasBwdRSPlaySITTone
This object specifies a backward signal indicating that
SIT tone should be played towards the calling party.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.21
ccasBwdRSSubscriberLineBusy
This object specifies a backward signal indicating that
the line or lines connecting the called subscriber to
the exchange are busy or engaged.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.22
ccasBwdRSNetworkCongstInGroupB
This object specifies a backward signal indicating that
congestion condition has occured after the changeover
to Group B signals.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.23
ccasBwdRSInvalidDialedNumber
This object specifies a backward signal indicating that the
dialed or called number is invalid or not in use (e.g. an
unused country code, an unused trunk code or subscriber
number that has not been allocated).
The …
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.24
ccasBwdRSSubLineFreeWithCharge
This object specifies a backward signal indicating that
the called party's line is free and that the call has to
be charged on answer.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.25
ccasBwdRSSubLineFreeWithNoCharge
This object specifies a backward signal indicating that
the called party line is free but is not to be charged
on answer.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.26
ccasBwdRSSubLineOutOfOrder
This object specifies a backward signal indicating that the
called party line is out of service or faulty.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.27
ccasBwdRSAnnouncement
This object specifies a backward signal indicating that an
announcement follows this indication.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.28
ccasBwdRSXtoGrpASendNextDNIS
This object specifies a backward signal requesting the other
exchange to switch to reception of group A and send the next
DNIS digit.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.29
ccasBwdRSXtoGrpASendDNISFrmBeg
This object specifies a backward signal requesting the other
exchange to switch to reception of group A and send the DNIS
digits from the beginning.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.30
ccasBwdRSXtoGrpAResendLastDNIS
This object specifies a backward signal requesting the other
exchange to switch to reception of group A and resend the last
DNIS digit sent out.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.31
ccasBwdRSSSendCatSwGrpB
This object specifies a backward signal requesting the end
receiving this signal to send the subscriber category
information and switch to grp B from group C.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.32
ccasBwdRSSGrpCCong
This object specifies a backward signal indicating that
congestion occurred in the network when in group C signaling
state.
The default value is country specific.
CASBackwardSignalr/w
Type Values:
1notApplicable
2a1
3a2
4a3
5a4
6a5
7a6
8a7
9a8
10a9
11a10
12a11
13a12
14a13
15a14
16a15
17b1
18b2
19b3
20b4
21b5
22b6
23b7
24b8
25b9
26b10
27b11
28b12
29b13
30b14
31b15
32c1
33c2
34c3
35c4
36c5
37c6
38c7
39c8
40c9
41c10
42c11
43c12
44c13
45c14
46c15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.33
ccasFwdRSANIDigitAvailable
This object specifies a forward signal indicating that ANI
digits are available.
This is used in country variants like India to indicate
that the ANI digits are available when the backward signal
requesting for ANI d…
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.34
ccasFwdRSANIDigitNotAvailable
This object specifies a forward signal indicating that
there are no ANI digits available for out pulsing.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.35
ccasFwdRSEndANICallingPartyNotRev
This object specifies a forward signal indicating
that there are no more ANI digits to out pulse and the
calling party can not be revealed to the called party.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.36
ccasFwdRSEndANICallingPartyRev
This object specifies a forward signal indicating that
there are no more ANI digits to out pulse and the calling
party can be revealed to the called party.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.37
ccasFwdRSEndOfDNISDigit
This object specifies a forward signal indicating the end
of DNIS digits.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.38
ccasFwdRSNoCategoryAvailble
This object specifies a forward signal indicating that
there is no calling party category (information) available
to be sent out.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.39
ccasFwdRSCCEchoSuppressor
This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The call requires echo suppressors.
The default value …
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.40
ccasFwdRSCCNoEchoSuppressor
This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The call may not require any echo suppressor.
The defau…
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.41
ccasFwdRSCCInsertEchoSuppressor
This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The outgoing half echo suppressor has to be inserted.
…
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.42
ccasFwdRSIncHalfEchoRequired
This object specifies a forward signal indicating that:
. The outgoing half echo suppressor has been inserted.
. The incoming half echo suppressor is required.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.43
ccasFwdRSTestCall
This object specifies a forward signal. When it is used
as the first forward signal and indicates that the call
is being originated by test equipment.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.44
ccasFwdRSSatelLinkIncluded
This object specifies a forward signal indicating that
a satellite link is included in the connection.
This signal is sent in response to backward signal
requesting for nature of circuit.
The default value is country…
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.45
ccasFwdRSSatelLinkNotIncluded
This object specifies a forward signal indicating that
no satellite link is included in the connection.
This signal is sent in response to backward signal
requesting for nature of circuit.
The default value is countr…
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.46
ccasFwdRSDiscriminatorDigit
This object specifies a forward signal indicating the
digit that separates or distinguishes different information
blocks in the forward signals being generated or received.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.47
ccasFwdRSOtherLanguage
This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.48
ccasFwdRSOtherLanguage1
This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.49
ccasFwdRSOtherLanguage2
This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.50
ccasFwdRSRequestNotAccepted
This object specifies a forward signal indicating that the
receiving backward signal could not be processed or defined.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.51
ccasFwdRSSubWithoutPriorNational
This object specifies a forward signal indicating that the
call is set up from a subscriber's line and is non-priority.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.52
ccasFwdRSSubPriorNational
This object specifies a forward signal indicating that the
call is set up from a subscriber's line to which priority
treatment of calls has been accorded. This signal is specified
to national trunks only.
The default …
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.53
ccasFwdRSSubPriorInternational
This object specifies a forward signal indicating that the
call is set up from a subscriber's line to which priority
treatment of calls has been accorded. This signal is specified
to international trunks only.
The def…
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.54
ccasFwdRSMaintenanceEquipment
This object specifies a forward signal indicating that
the call comes from maintenance equipment.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.55
ccasFwdRSOperatorCall
This object specifies a forward signal indicating that
the call is setup from an operator.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.56
ccasFwdRSDataTransNational
This object specifies a forward signal indicating that
the call is being used for national data transmission.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.57
ccasFwdRSDataTransInternational
This object specifies a forward signal indicating that
the call is being used for international data transmission.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.58
ccasFwdRSOperNoFwdTransFacility
This object specifies a forward signal indicating the call
is being set up from a subscriber's line, operator's
position or from maintenance equipment and no forward
transfer signal will be used.
The default value is …
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.59
ccasFwdRSOperFwdTransFacility
This object specifies a forward signal indicating the call
is set up from an operator's position with possibility of
recourse to the forward transfer facility.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.60
ccasFwdRSSubsrcWithMeter
This object specifies a forward signal indicating the
subscribers have a meter.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.61
ccasFwdRSSubsrcWithIDD
This object specifies a forward signal indicating the
subscribers have an International Direct Dial facility.
The default value is country specific.
CASForwardSignalr/w
Type Values:
1notApplicable
2i1
3i2
4i3
5i4
6i5
7i6
8i7
9i8
10i9
11i10
12i11
13i12
14i13
15i14
16i15
17ii1
18ii2
19ii3
20ii4
21ii5
22ii6
23ii7
24ii8
25ii9
26ii10
27ii11
28ii12
29ii13
30ii14
31ii15
32iiI1
33iiI2
34iii3
35iii4
36iii5
37iii6
38iii7
39iii8
40iii9
41iii10
42iii11
43iii12
44iii13
45iii14
46iii15
 .1.3.6.1.4.1.9.9.314.1.4.1.1.62
ccasRSInterpreFirstANIDigit
This object is used to interpret the meaning of the first
ANI digit for both receiving and transmitting when sent
and received.
.firstANIDigit: First ANI digit.
.aniAvailableOrNot: Indication as to whether ANI is ava…
Enumerationr/w
Enumerated Values:
1firstANIDigit
2aniAvailableOrNot
3subscriberCategory
 .1.3.6.1.4.1.9.9.314.1.4.1.1.63
ccasRSGetValueFromValidIndex
This object specifies the entry index from which values
for the objects not specified in the set operation will
be copied over from.
If both the country index and this object are specified,
this object takes precede…
Unsigned32r/w
Constraints:
range: 1-400
 .1.3.6.1.4.1.9.9.314.1.4.1.1.64
ccasRSSeqInfCollect
This object determines the sequence in which information
will be gathered by the incoming register.

Only a set of predefined characters can be used in the
octet string notation of the sequence. The specia…
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.314.1.4.1.1.65
ccasRSSendFirstFwdSig
This object specifies the information element that will
take precedence when being sent out as the first forward
register signal for an outgoing call. This can be either
the first DNIS digit, indication that country …
Enumerationr/w
Enumerated Values:
1dnisCCLangDisc
2dnisLangDiscCC
3cCLangDiscDnis
4cCDnisLangDisc
5langDiscCCDnis
6langDiscDnisCC
 .1.3.6.1.4.1.9.9.314.1.4.1.1.66
ccasRSRowStatus
This object is used for adding, modifying, and deleting
the entries from the ccasRegisterSignalTable.
A default entry with index value 1 is created at
initialization, and it cannot be modified or deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.314.1.4.1.1.67

ccasIfExtRegSignalTimerTable

table
.1.3.6.1.4.1.9.9.314.1.5.2 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtRegSignalTimerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtRegSignalTimerTable' 
This table defines the timers related to the CAS register 
signals.
ccasIfExtRegSignalTimerEntry row .1.3.6.1.4.1.9.9.314.1.5.2.1
Each entry represents a CAS Register Signal Timer in media
gateway.
Indexes
Column Syntax OID
ccasRSTIndex
An arbitrary index that uniquely identifies a
entry in the ccasIfExtRegSignalTimerTable.
The index of 1 is reserved for the default entry.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.1
ccasRSTAnswerSigTimer
This object specifies the timer that is started
after having sent out the last forward digit within
which the backward register answer signal should be
received.

Normally it would be same as the compelled…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.2
ccasRSTCompelledFwdToneOnTimer
This object specifies the period for which the forward
digit tone stays on, waiting for a reception of the
backward signal in compelled signaling.
This timer is started after the forward signal digit is
turned on.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.3
ccasRSTCompelledFwdToneOffTimer
This object specifies the period for which the forward
signal digit is turned off in compelled signaling.
This timer is started after the backward signal is
received and after the forward signal digit is turned
off …
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.4
ccasRSTCompelledBwdToneOnTimer
This object specifies the period for which the backward
signal stays on waiting for the forward digit signal to
go off in compelled signaling.
This timer is started after the backward signal is sent
in response to …
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.5
ccasRSTOutFwdPulseOnTimer
This object specifies the timer is started after the
forward digit tone is sent out. Tone is turned off
after the timer expires.
This object applies to outgoing R2 registers where the
forward signals are sent as puls…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.6
ccasRSTOutFwdPulseOffTimer
This object specifies the interval between two forward
pulse tones.
This object applies to outgoing R2 registers where the
forward signals are sent as pulses for non-compelled
signaling.
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.7
ccasRSTIncFwdPulseOnTimer
This object specifies the period for which the forward
digit pulse can be on. The timer is started after the
forward digit signal is received, and stays on until
the forward digit being received is turned off.
Th…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.8
ccasRSTBwdPulseOnTimer
This value specifies the period for which the backward
pulse is on before it is turned off.
This object applies to incoming R2 registers where the
forward signals are received either continuously or as
a pulse bu…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.9
ccasRSTIncomingRegSigDuration
This object specifies the duration within which the register
signaling should complete for an incoming call.
This timer is started as soon as the first forward register
signal is received.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.10
ccasRSTOutgoingRegSigDuration
This object specifies the duration within which the register
signaling should complete for an outgoing call.
This timer is started when the first forward register signal
is sent out.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.11
ccasRSTCalledPartyInterDigTimer
This object specifies the interdigit timer for the
collection of called party number (DNIS) for R2 signaling
when there is no digit map associated with the digits
being gathered.
This timer is started after receiving ea…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.5.2.1.12
ccasRSTRowStatus
This object is used for adding, deleting and modifying
the entries from the ccasIfExtRegSignalTimerTable.
A default entry with index value 1 is created at
initialization, and it can not be modified or deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.314.1.5.2.1.13

ccasIfExtGeneralConfigTable

table
.1.3.6.1.4.1.9.9.314.1.6.1 · 1 row entry · 34 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccasIfExtGeneralConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CAS-IF-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CAS-IF-EXT-MIB::ccasIfExtGeneralConfigTable' 
This table defines the general parameters related to 
CAS variant.
ccasIfExtGeneralConfigEntry row .1.3.6.1.4.1.9.9.314.1.6.1.1
An entry represents a general attribute for CAS variant
in media gateway.
Indexes
Column Syntax OID
ccasGCnfIndex
An arbitrary index that uniquely identifies a
entry in the ccasIfExtGeneralConfigTable.
The index of 1 is reserved for the default entry.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.314.1.6.1.1.1
ccasGCnfGlarePolicy
This object specifies a glare policy. It is used only if
CAS DS0 directionality of the endpoint is bidirectional,
and is applicable for non R2 variants.
. rptSzOnGlareTmrExp (1): When glare is detected, the GW
will…
Enumerationr/w
Enumerated Values:
1rptSzOnGlareTmrExp
2rptSzOnGlareDet
3rptRelOnGlareTmrExpAndGoOnHook
4goOnHookOnGlareDet
 .1.3.6.1.4.1.9.9.314.1.6.1.1.2
ccasGCnfParmSource
This object indicates whether GW should read the CAS
related timer parameters from the CAS Variant file
downloaded for that endpoint or to read from the MIB.
This gives the flexibility of configuring different CAS
r…
Enumerationr/w
Enumerated Values:
1casVariantFile
2mib
 .1.3.6.1.4.1.9.9.314.1.6.1.1.3
ccasGCnfRegSigMode
This object specifies the register signaling mode for a
R2 registers.
CASRegisterSignalr/w
Type Values:
1compelled
2noncompelled
3semicompelled
 .1.3.6.1.4.1.9.9.314.1.6.1.1.4
ccasGCnfLineSigType
This object specifies the line signaling type that will be
used for the R2 line signaling.
. digital (1): The digital line signaling is typically used
for PCM systems. Only A and B bits are used to indicate
lin…
Enumerationr/w
Enumerated Values:
1digital
2analog
3pulse
 .1.3.6.1.4.1.9.9.314.1.6.1.1.5
ccasGCnfRingBackType
This object specifies the ring back signal type of FGD
protocol.
. wink (1): A pulse which is a timed transition from on
hook to off hook and back to on hook.
. wink and tone (2): A pulse which is a timed transitio…
Enumerationr/w
Enumerated Values:
1wink
2winkAndTone
 .1.3.6.1.4.1.9.9.314.1.6.1.1.6
ccasGCnfIncCallHiFreqPower
This object specifies the power of the high frequency signal
component for incoming call.
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.7
ccasGCnfIncCallLoFreqPower
This object specifies the power of the low frequency signal
component for incoming call.
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.8
ccasGCnfIncCallNegTwist
This object specifies a negative power twist when the
power level of the low frequency component is set to
relatively higher than the high frequency component
for incoming call.
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.9
ccasGCnfIncCallPosTwist
This object specifies a positive power twist when the
power level of the high frequency component is set to
relatively higher than the low frequency component for
incoming call.
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.10
ccasGCnfIncCallBreakThreshold
This object specifies a power level which is used for
detection of on hook to off hook transition for incoming
call.
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.11
ccasGCnfOutCallLoFreqPower
This object specifies the power level of the low frequency
component for outgoing call.
The power level of the high frequency component of outgoing
call is relative above or below the value specified in object
ccasG…
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.12
ccasGCnfOutCallPowerTwist
This object specifies the relative power level of the
high frequency component for outgoing call.
When this object is set to 0, the power level of both
frequency components is set to the same level.
When this object is …
dBmInteger32r/w
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.13
ccasGCnfOutCadenceOntime
This object specifies the duration during which the digit
tone is generated for outgoing call.
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.6.1.1.14
ccasGCnfOutCadenceOfftime
This object specifies the silence between digit tones
for outgoing call.
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.6.1.1.15
ccasGCnfCountryCode
This object specifies the country code digits.
OctetStringr/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.9.9.314.1.6.1.1.16
ccasGCnfEchoCancellation
This object specifies the echo cancellation mode, and
it is applicable to an outgoing R2 register.
Enumerationr/w
Enumerated Values:
1noEchoRequired
2outgoingHalfEchoRequired
3outgoingHalfEchoSuppressorInserted
4incomingHalfEchoSuppressorRequired
 .1.3.6.1.4.1.9.9.314.1.6.1.1.17
ccasGCnfSubscriberCategory
This object specifies the subscriber category types:
. (1) subscriber without priority
. (2) subscriber with priority
. (3) maintenance equipment
. (4) operator call …
Enumerationr/w
Enumerated Values:
1subscriberWithoutPriority
2subscriberWithPriority
3maintenanceEquipment
4operatorCall
5dataNationalTransmission
6subscriberOrOperatorWithoutForwardTransfer
7operatorWithForwardTransfer
8dataInternationalTransmission
 .1.3.6.1.4.1.9.9.314.1.6.1.1.18
ccasGCnfNatureOfCircuit
This object specifies if there is any satellite link in
the path:
. (1) Satellite link is not included.
. (2) Satellite link is included.
Enumerationr/w
Enumerated Values:
1notIncluded
2included
 .1.3.6.1.4.1.9.9.314.1.6.1.1.19
ccasGCnfCompelledSignalingType
This object specifies the Compelled Signaling type:
. enbloc (1): The called number is forwarded in a block.
. overlap (2): The called numder is forwarded one at a time.
. endtoend (3): The signaling between register ov…
Enumerationr/w
Enumerated Values:
1enbloc
2overlap
3endtoend
 .1.3.6.1.4.1.9.9.314.1.6.1.1.20
ccasGCnfTxDigitOrder
This object specifies the transmit digit order in which
ANI and DNIs will be dialled out when the controlling
application gives both the the calling party number and
the called party number to the CAS module for dia…
Enumerationr/w
Enumerated Values:
1aniDnis
2dnisAni
 .1.3.6.1.4.1.9.9.314.1.6.1.1.21
ccasGCnfDigitDetectMode
This objects specifies the digit detect mode that the
GW should be opened with for reception of digits.
. dtmf (1): Dual tone multifrequency
. mf (2): Multifrequency
. dp (3): Dial pulse
This object applies to non R2 i…
Enumerationr/w
Enumerated Values:
1dtmf
2mf
3dp
 .1.3.6.1.4.1.9.9.314.1.6.1.1.22
ccasGCnfMeteringRepIntThresh
This object specifies the duration between two consecutive
metering pulses, if it changes more than value specified
in this parameter then an event will be triggered to MGC.
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.6.1.1.23
ccasGCnfStartTimer
This object specifies the amount of time that the GW
must wait for receiving digits after generating the
seize ACK or start dial indication for an incoming
call.
The value of 0 indicates the timer will not be starte…
secondsUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.24
ccasGCnfLongTimer
This object specifies the period between receiving
digits. The timer is not started until the first digit
is received.
The GW starts this timer during digit collection when
at least one or more digits is required for…
secondsUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.25
ccasGCnfShortTimer
This object specifies the period between receiving
digits.
The GW starts this timer during digit collection when
the digit string that it has collected matches at least
one pattern in the digit map, but reception of …
secondsUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.26
ccasGCnfLongDurationTimer
This object specifies long duration event when placed
in front of a digit. It indicates that that position is
satisfied only if the duration of the event exceeds the
long-duration threshold.
millisecondsUnsigned32r/w
Constraints:
range: 100-9900
 .1.3.6.1.4.1.9.9.314.1.6.1.1.27
ccasGCnfMGCTimer
This object specifies the timer in the GW waiting for
the MGC to provide the rest of the information for CAS
signaling.
During overlap CAS signaling, for an outgoing call, the
MGC might specify a part of the digits to b…
millisecondsUnsigned32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.28
ccasGCnfDigitType
This object specifies the digit type to pulsed from the
GW such as:
.dtmf - Dual tone multifrequency.
.mf - Multifrequency.
.dp - Dial pulse.
This parameter can be overridden by MGC. In the event
that the MGC do…
Enumerationr/w
Enumerated Values:
1dtmf
2mf
3dp
 .1.3.6.1.4.1.9.9.314.1.6.1.1.29
ccasGCnfEndPointDirectional
This object specifies the direction in which CAS calls
will be accepted on this endpoint.
.bidirectional - Accepts both incoming and outgoing calls.
.incoming - Accepts incoming calls only.
.outgoing - Accepts outgoi…
Enumerationr/w
Enumerated Values:
1bidirectional
2incoming
3outgoing
 .1.3.6.1.4.1.9.9.314.1.6.1.1.30
ccasGCnfPulseReceiveTimeout
This object specifies the time that the MG should wait
for the receipt of pulse (on hook pulse or off hook
pulse).
The value of 0 indicates the timer will not be started
and MG would wait forever.
secondsUnsigned32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.31
ccasGCnfInitialDelay
This object specifies the initial delay that must be applied
on an outgoing trunk before the digits are pulse out.
The value of 0 indicates the timer, ccasGCnfInitialDelay
will start immediately.
millisecondsUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.9.9.314.1.6.1.1.32
ccasGCnfMaxNumCallParty
This object specifies the maximum number of calling party
digits to collect for reporting to the MGC.
The MGC can overridden this value, and a value of 0 indicates
that there is no limit and all numbers till end of cal…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.314.1.6.1.1.33
ccasGCnfRowStatus
This object is used for adding, modifying, deleting the
entries from the ccasExtIfGeneralConfigTable.
A default entry with index value 1 is created at
initialization, and it can not be modified or deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.314.1.6.1.1.34