Standard view Table view

CISCO-CABLE-DIAG-MIB

        This MIB module defines objects for managing cable 
diagnostic test capabilites supported by the Cisco devices.
        
Cable diagnostic tests are tests intended to exercise 
the functional integrity of the cable attached to a 
physical interface.
        
Examples of cable diagnostic test methods are: PRBS
(Pesudo Random Binary Sequence), TDR (Time Domain 
reflectometery), etc..
Source file
CISCO-CABLE-DIAG-MIB
Last revised
Identity
ciscoCableDiagMIB
Base OID
1.3.6.1.4.1.9.9.390
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-CABLE-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-CABLE-DIAG-MIB::ciscoCableDiagMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-DIAG-MIB::ciscoCableDiagMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (31)
ciscoCableDiagMIB
.1.3.6.1.4.1.9.9.390
ciscoCableDiagMIBNotifs
.1.3.6.1.4.1.9.9.390.0
ciscoCableDiagMIBObjects
.1.3.6.1.4.1.9.9.390.1
ccdPrbsObjects
.1.3.6.1.4.1.9.9.390.1.1
ccdPrbsIfTable
.1.3.6.1.4.1.9.9.390.1.1.1
ccdPrbsIfEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.390.1.1.1.1
ccdPrbsIfAction r/w
Enumeration
 .1.3.6.1.4.1.9.9.390.1.1.1.1.1
ccdPrbsIfActionStatus
Enumeration
 .1.3.6.1.4.1.9.9.390.1.1.1.1.2
ccdPrbsIfTestErrors
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.9.9.390.1.1.1.1.3
ccdPrbsIfTestErrorsResetTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.9.390.1.1.1.1.4
ccdPrbsIfTestErrorsMaxValue
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.390.1.1.1.1.5
ccdTdrObjects
.1.3.6.1.4.1.9.9.390.1.2
ccdTdrIfTable
.1.3.6.1.4.1.9.9.390.1.2.1
ccdTdrIfEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.390.1.2.1.1
ccdTdrIfAction r/w
Enumeration
 .1.3.6.1.4.1.9.9.390.1.2.1.1.1
ccdTdrIfActionStatus
Enumeration
 .1.3.6.1.4.1.9.9.390.1.2.1.1.2
ccdTdrIfLastTestTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.9.390.1.2.1.1.3
ccdTdrIfResultValid
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.390.1.2.1.1.4
ccdTdrIfResultTable
.1.3.6.1.4.1.9.9.390.1.2.2
ccdTdrIfResultEntry
IF-MIBifIndexccdTdrIfResultPairIndex
 .1.3.6.1.4.1.9.9.390.1.2.2.1
ccdTdrIfResultPairIndex
Enumeration
 .1.3.6.1.4.1.9.9.390.1.2.2.1.1
ccdTdrIfResultPairChannel
Enumeration
 .1.3.6.1.4.1.9.9.390.1.2.2.1.2
ccdTdrIfResultPairLength
Integer32
 .1.3.6.1.4.1.9.9.390.1.2.2.1.3
ccdTdrIfResultPairLenAccuracy
Integer32
 .1.3.6.1.4.1.9.9.390.1.2.2.1.4
ccdTdrIfResultPairDistToFault
Integer32
 .1.3.6.1.4.1.9.9.390.1.2.2.1.5
ccdTdrIfResultPairDistAccuracy
Integer32
 .1.3.6.1.4.1.9.9.390.1.2.2.1.6
ccdTdrIfResultPairLengthUnit
Enumeration
 .1.3.6.1.4.1.9.9.390.1.2.2.1.7
ccdTdrIfResultPairStatus
Enumeration
 .1.3.6.1.4.1.9.9.390.1.2.2.1.8
ciscoCableDiagMIBConform
.1.3.6.1.4.1.9.9.390.2
ciscoCableDiagMIBCompliances
.1.3.6.1.4.1.9.9.390.2.1
ciscoCableDiagMIBGroups
.1.3.6.1.4.1.9.9.390.2.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-CABLE-DIAG-MIBciscoselected
Conformance Groups (2)
ccdPrbsGroup
ccdPrbsIfAction ccdPrbsIfActionStatus ccdPrbsIfTestErrors ccdPrbsIfTestErrorsResetTime ccdPrbsIfTestErrorsMaxValue
A collection of managed objects to support PRBS
cable diagnotic test on the interfaces of the device.
 .1.3.6.1.4.1.9.9.390.2.2.1
ccdTdrGroup
ccdTdrIfAction ccdTdrIfActionStatus ccdTdrIfLastTestTime ccdTdrIfResultValid ccdTdrIfResultPairChannel ccdTdrIfResultPairLength ccdTdrIfResultPairLenAccuracy ccdTdrIfResultPairDistToFault ccdTdrIfResultPairDistAccuracy ccdTdrIfResultPairLengthUnit ccdTdrIfResultPairStatus
A collection of managed objects to support TDR
cable diagnotic test on the interfaces of the device.
 .1.3.6.1.4.1.9.9.390.2.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.390.2.1.1
The compliance statement for SNMP entities that implement the
CISCO-CABLE-DIAG-MIB.
Required groups
optional ccdPrbsGroup This group is mandatory for implementations of PRBS cable
diagnostic test.
optional ccdTdrGroup This group is mandatory for implementations of TDR cable
diagnostic test.