CISCO-BSC-MIB
The MIB module for BSC.
Overview of BSC MIB
MIB description
The BSC MIB provides the configuration and operational information
on Cisco's Binary Synchronous Communications implementation. The
following entities are managed:
1) BSC ports (serial interfaces)
2) BSC Control Units (stations on a port)
The BSC ports are identified by the interface index, and additional
information about this interface can be obtained from the Cisco
Serial Interface MIB.
The BSC Control Units are identified by the Control Unit address;
this is the address used by BSTUN to route the BSC traffic - it is
therefore equivalent to the bstunRouteStationAddress in the
bstunRouteTable MIB.
- Source file
CISCO-BSC-MIB- Last revised
- Identity
ciscoBscMIB- Base OID
1.3.6.1.4.1.9.9.36
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-BSC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-BSC-MIB::ciscoBscMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-BSC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-BSC-MIB::ciscoBscMIB'
Objects (41)
Showing 41 of 41 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.36 |
||
.1.3.6.1.4.1.9.9.36.1 |
||
.1.3.6.1.4.1.9.9.36.1.1 |
||
.1.3.6.1.4.1.9.9.36.1.1.1 |
||
.1.3.6.1.4.1.9.9.36.1.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.1 |
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.10 |
||
|
decisecondsInteger32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.11 |
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.12 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.13 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.14 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.5 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.6 |
|
.1.3.6.1.4.1.9.9.36.1.1.1.1.7 |
||
.1.3.6.1.4.1.9.9.36.1.1.1.1.8 |
||
.1.3.6.1.4.1.9.9.36.1.1.1.1.9 |
||
.1.3.6.1.4.1.9.9.36.1.2 |
||
.1.3.6.1.4.1.9.9.36.1.2.1 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.2.1.1.1 |
|
.1.3.6.1.4.1.9.9.36.1.2.1.1.10 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.11 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.36.1.2.1.1.2 |
|
.1.3.6.1.4.1.9.9.36.1.2.1.1.3 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.4 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.5 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.6 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.7 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.8 |
||
.1.3.6.1.4.1.9.9.36.1.2.1.1.9 |
||
.1.3.6.1.4.1.9.9.36.1.3 |
||
.1.3.6.1.4.1.9.9.36.1.3.1 |
||
.1.3.6.1.4.1.9.9.36.1.3.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.3.1.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.36.1.3.1.1.2 |
|
.1.3.6.1.4.1.9.9.36.3 |
||
.1.3.6.1.4.1.9.9.36.3.1 |
||
.1.3.6.1.4.1.9.9.36.3.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-BSC-MIBciscoselected
Conformance Groups (4)
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.36.3.1.1The compliance statement for BSTUN.
Required groups
| mandatory | bscPortsGroup | |
| mandatory | bscControlUnitsGroup |
OID
.1.3.6.1.4.1.9.9.36.3.1.2The compliance statement for all Cisco Systems that
implement BSC functions.
implement BSC functions.
Required groups
| mandatory | bscPortsGroupRev1 | |
| mandatory | bscControlUnitsGroup | |
| mandatory | bscExtAddressGroup |