Standard view Table view

CISCO-802-TAP-MIB

        This module manages Cisco's intercept feature for 
802 (layer 2) streams.
        
This MIB is used along with CISCO-TAP2-MIB to
intercept 802 traffic. CISCO-TAP2-MIB along with
specific filter MIBs like this MIB replace
CISCO-TAP-MIB.
        
To create an 802 intercept, an entry c802tapStreamEntry 
is created which contains the filter details. An entry
cTap2StreamEntry of CISCO-TAP2-MIB is created which 
is the common stream information for all kinds of 
intercepts and type of the specific stream is set to
mac in this entry.
Source file
CISCO-802-TAP-MIB
Last revised
Identity
cisco802TapMIB
Base OID
1.3.6.1.4.1.9.9.395
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TAP2-MIB cTap2MediationContentId cTap2StreamIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC MacAddress RowStatus
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-802-TAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-802-TAP-MIB::cisco802TapMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-802-TAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-802-TAP-MIB::cisco802TapMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (18)
cisco802TapMIB
.1.3.6.1.4.1.9.9.395
cisco802TapMIBNotifs
.1.3.6.1.4.1.9.9.395.0
cisco802TapMIBObjects
.1.3.6.1.4.1.9.9.395.1
c802tapStreamEncodePacket
.1.3.6.1.4.1.9.9.395.1.1
c802tapStreamCapabilities
Bits
 .1.3.6.1.4.1.9.9.395.1.1.1
c802tapStreamTable
.1.3.6.1.4.1.9.9.395.1.1.2
c802tapStreamEntry
CISCO-TAP2-MIBcTap2MediationContentIdCISCO-TAP2-MIBcTap2StreamIndex
 .1.3.6.1.4.1.9.9.395.1.1.2.1
c802tapStreamFields r/w
Bits
 .1.3.6.1.4.1.9.9.395.1.1.2.1.1
c802tapStreamInterface r/w
Integer32
 .1.3.6.1.4.1.9.9.395.1.1.2.1.2
c802tapStreamDestinationAddress r/w
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.9.9.395.1.1.2.1.3
c802tapStreamSourceAddress r/w
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.9.9.395.1.1.2.1.4
c802tapStreamEthernetPid r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.395.1.1.2.1.5
c802tapStreamDestinationLlcSap r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.395.1.1.2.1.6
c802tapStreamSourceLlcSap r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.395.1.1.2.1.7
c802tapStreamStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.395.1.1.2.1.8
cisco802TapMIBConform
.1.3.6.1.4.1.9.9.395.2
cisco802TapMIBCompliances
.1.3.6.1.4.1.9.9.395.2.1
cisco802TapMIBGroups
.1.3.6.1.4.1.9.9.395.2.2
Dependencies (10) 5 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. INET-ADDRESS-MIBrfc
  9. SNMP-FRAMEWORK-MIBrfc
  10. CISCO-TAP2-MIBcisco
  11. CISCO-802-TAP-MIBciscoselected
Conformance Groups (1)
cisco802TapStreamGroup
c802tapStreamCapabilities c802tapStreamFields c802tapStreamInterface c802tapStreamDestinationAddress c802tapStreamSourceAddress c802tapStreamEthernetPid c802tapStreamSourceLlcSap c802tapStreamDestinationLlcSap c802tapStreamStatus
These objects are necessary for a description of IEEE 802
packets to select for interception.
 .1.3.6.1.4.1.9.9.395.2.2.1
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.395.2.1.1
The compliance statement for entities which implement the
Cisco Intercept MIB for 802 streams.
Required groups
mandatory cisco802TapStreamGroup