CISCO-5800-HEALTH-MON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

ciscoHealthMonStatusTable

table
.1.3.6.1.4.1.9.10.28.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoHealthMonStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-5800-HEALTH-MON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-5800-HEALTH-MON-MIB::ciscoHealthMonStatusTable' 
The table of status maintained by the health monitor.
ciscoHealthMonStatusEntry row .1.3.6.1.4.1.9.10.28.1.1.1
An entry in the status table, containing the
information about the status of the health monitoring setup
commands. Depending on the configured monitoring type these commands
are setup on the shelf or on the system contr…
Indexes
Column Syntax OID
ciscoHealthMonStatusIndex
Unique index for indexing the ciscoHealthMonStatusTable.
This index is for SNMP purposes only, and has no intrinsic meaning.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.28.1.1.1.1
ciscoHealthMonStatusType
Monitoring type
modemUtil(1), trunkUtil(2), iomemUtil(3)
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.9.10.28.1.1.1.2
ciscoHealthMonShelfId
This is the shelf-id of the monitored shelf.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.28.1.1.1.3
ciscoHealthMonAddress
This is the IP address of the monitored shelf.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.28.1.1.1.4
ciscoHealthMonDescr
Textual description of the utilization type being
monitored on a shelf. This description is a short textual label,
suitable as a human-sensible identification for the rest of the
information in the entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.28.1.1.1.5
ciscoHealthMonValue
The current value for the monitoring type on a
monitored shelf.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.1.1.6
ciscoHealthMonThreshold
This is the monitoring threshold value configured
through the command line.

If the configured monitoring type is io-mem, rmon alarm on the
shelf will use this value as the threshold for generating the
ev…
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.10.28.1.1.1.7
ciscoHealthMonThresholdExceedCount
Number of times monitoring value exceeded the
configured threshold value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.28.1.1.1.8

ciscoHealthMonCountTable

table
.1.3.6.1.4.1.9.10.28.1.2 · 1 row entry · 14 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoHealthMonCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-5800-HEALTH-MON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-5800-HEALTH-MON-MIB::ciscoHealthMonCountTable' 
The table of mib entries maintained by the health monitor.
ciscoHealthMonCountEntry row .1.3.6.1.4.1.9.10.28.1.2.1
An entry in the count table represents the polled data
of ceratin mib variables for a router shelf. System controller will do
the polling of the mib variables only if system controller can
talk to that particular router…
Indexes
Column Syntax OID
ciscoHealthMonCountIndex
Unique index for indexing the
ciscoHealthMonCountTable. This unique index represents the shelf-id of
the monitored shelf.
Integer32
Constraints:
range: 0-9999
 .1.3.6.1.4.1.9.10.28.1.2.1.1
ciscoHealthMonT1E1LinesUp
The number of active T1 and E1 lines on a shelf. A
line is considered as an active line if it is operationally up.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.2
ciscoHealthMonT1E1LinesDown
The number of inactive T1 and E1 lines on a
shelf. This is the special case where a line is counted as down if it
is operationally down and administratively up.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.3
ciscoHealthMonActiveDS0
The number of DS0's that are currently in use.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.4
ciscoHealthMonTotalDS0
The total number of DS0's on a shelf. This is based
on the number of T1 and E1 lines present on the router shelf.

Total DS0 = (# of T1 lines - 1 * 24) + 23 + (# of E1 lines*30).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.5
ciscoHealthMonTotalModems
The total number of modems installed on a shelf. This
is the polled value for cmSystemInstalledModem from the router shelf.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.6
ciscoHealthMonModemsInUse
The number of modems on a shelf that are in the
following states: connected, offHook, loopback, or
downloadFirmware. This the polled value for cmSystemModemsInUse from
the router shelf.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.7
ciscoHealthMonUnavailableModems
The number of modems on a shelf that cannot accept the
calls. They are in the following states: unknown, onHook, busiedOut,
disabled, bad, or downloadFirmwareFailed. This is the polled value for
cmSystemModemsUnavailabl…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.8
ciscoHealthMonIOMemUsed
The number of bytes of IO memory that are currently
in use by the applications on the shelf. This is the polled value for
ciscoMemoryPoolUsed of io-mem type on the router shelf.
bytesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.9
ciscoHealthMonIOMemFree
The number of bytes of IO memory that are currently
available to use on the shelf.This is the polled value for
ciscoMemoryPoolFree of io-mem type on the router shelf.
bytesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.10
ciscoHealthMonCPUavgBusy5
5 minute exponentially-decayed moving average of the
CPU busy percentage. This is the polled value for avgBusy5 from the
router shelf.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.10.28.1.2.1.11
ciscoHealthMonUtilEgressInOctet
This is the percentage utilization of total number of
octets received on all the active egress interface, including framing
characters.

A port is considered as an egress port if it's ifSpeed > 1544000
%…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.12
ciscoHealthMonUtilEgressOutOctet
This is the percentage utilization of the total
number of octets transmitted out on all the active egress interface,
including framing characters.

A port is considered as an egress port if it's ifSpeed > …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.28.1.2.1.13
ciscoHealthMonShelfLastUpdate
This is the last time at which the system-controller
has polled the mib entries from a shelf. However, if system-controller
can not talk to that shelf, this entry will have the same time as the
last update and a string …
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.28.1.2.1.14