CIG-CLIENTS-MIB Table View

cigDhcpClientsTable parameters. Used for DHCP clients 
which gathered dynamic IP addresses and configuration from DHCP servers.

cigDhcpClientsEntry row .1.3.6.1.4.1.6889.2.1.17.1.1.1

cigDhcpClients Entry Parameters.

Indexes

cigDhcpClientsIfIndex

Column	Syntax	OID
cigDhcpClientsIfIndex A unique value for each interface. This value is same as ifIndex from ifTable. The DHCP client can be enabled on Vlan and on WAN Fast Ethernet interfaces.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.17.1.1.1.1
cigDhcpClientsRowStatus This is a row status mib item For adding and deleting DHCP clients interfaces. For configuring only DHCP client parameters use create and wait for specific interface. When a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.17.1.1.1.2
cigDhcpClientsIfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. It is the same as the ifAlias from the standard interface table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6889.2.1.17.1.1.1.3
cigDhcpClientsIPAddress The IP address received from remote peer during the DHCP session. This is the same MIB item as ipInterface table in CROUTE-MIB.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.17.1.1.1.4
cigDhcpClientsSubnetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. In case of DHCP client this is DHCP option 1 == Su…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.17.1.1.1.5
cigDhcpClientsClientId Client identifier used for manual leased. The structure of the client identifier is as follows: combination of TYPE and Data. Where Type = 01 if for Ethernet MACs and Data for this case if Ethernet MAC address. …	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.6889.2.1.17.1.1.1.6
cigDhcpClientsHostName Host name is sent by the DHCP client as Dhcp option 12. It is specifically used by part of DHCP servers (MS2000) to identify the client in the binding file (more user intuitive). This option is used as well by part of …	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.6889.2.1.17.1.1.1.7
cigDhcpClientsRequestLeaseTime The Requested leased time in seconds. Infinite is defined as 0xffffffff. 0 - used to present that no lease time requested from the DHCP server. I.e. option 51 will not be sent by the client. Default 0 seconds.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.17.1.1.1.8
cigDhcpClientsReceiveLeaseTime The received leased time from the DHCP server in seconds. Infinite is defined as 0xffffffff. Default 0 seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.17.1.1.1.9
cigDhcpClientsRemainLeaseTime The remains leased time in seconds . Infinite is defined as 0xffffffff. Default 0 seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.17.1.1.1.10
cigDhcpClientsRenewLeaseTime The time defined for renewing phase in seconds . Infinite is defined as 0xffffffff. It is defined as 0.5 of the receive lease. Default 0 seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.17.1.1.1.11
cigDhcpClientsRebindLeaseTime The time defined for rebinding phase in seconds . Infinite is defined as 0xffffffff. It is defined as 0.875 of the receive lease. Default 0 seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.17.1.1.1.12
cigDhcpClientsDefaultGatewayList Default Gateway is Dhcp option 3. Default = '' = Null String. The format of the string can be up to 8 IP addresses in the list, for example: '121.23.1.12 135.64.13.190 192.123.242.230'	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.6889.2.1.17.1.1.1.13
cigDhcpClientsDnsServerList DNS Server is Dhcp option 6. Default = '' = Null String. The format of the string can be up to 8 IP addresses in the list, for exapmle: '121.23.1.12 135.64.13.190 192.123.242.230'	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.6889.2.1.17.1.1.1.14
cigDhcpClientsDomainName DNS Server is Dhcp option 15. Default = Null String The format of the string can be: 'avaya' There is no ability to configure this option in the general option table.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.6889.2.1.17.1.1.1.15
cigDhcpClientsServerIpAddr The DHCP server IP address that the client gets from it the IP address allocation and keep requesting for lease extension from it. In case no IP address is gathered from DHCP server then value is 0.0.0.0. Default 0.0.0.…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.17.1.1.1.16
cigDhcpClientsOperations Used for instruct the DHCP client to perfrom release or renew operations.	Enumerationr/w Enumerated Values: 1 idle 2 release 3 renew	.1.3.6.1.4.1.6889.2.1.17.1.1.1.17
cigDhcpClientsStatus The status of the DHCP client. Select - Sending DISCOVER packets Request - Requesting IP address after selecting from all the offer packets. Bound - Receiving ACK packet and there is no conflict detection by sending ARP…	Enumeration Enumerated Values: 1 select 2 request 3 bound 4 rebind 5 renew 6 release 7 decline 8 reboot 9 idle 255 notSupported	.1.3.6.1.4.1.6889.2.1.17.1.1.1.18
cigDhcpClientsRequestBitmap Each bit of this value set to '1' indicates a specific requested DHCP option (Bitmap of 255 options represented by 32Bytes). When the bit is set to '1' then specific DHCP option is requested by the client. Subnet mask …	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.6889.2.1.17.1.1.1.19
cigDhcpClientsDefaultRouterTrackId Bind the status of the DHCP default router to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that the default router is not bound to any object…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.17.1.1.1.20

Lists of DNS servers. The default list(1) includes all the static DNS server and the
dynamic DNS servers from the DHCP clients/PPP interfaces as PPPoE and Dial out modem.

cigDnsResolverDnsServersListEntry row .1.3.6.1.4.1.6889.2.1.17.2.2.1

The DNS servers list. Lists of DNS servers.

Indexes

cigDnsResolverDnsServersListIndex

Column	Syntax	OID
cigDnsResolverDnsServersListIndex The index of the list of DNS servers. Default list index is 1. The user will not be able to create lists other then default list at the first release.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.17.2.2.1.1
cigDnsResolverDnsServersListDescription This is the list description. Default for DNS list #1: 'DNS list #1'	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.6889.2.1.17.2.2.1.2
cigDnsResolverDnsServersListRowStatus This is a row status mib item For adding and deleting DNS server lists. The user will not be able to create lists other then list 1 at the first release.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.17.2.2.1.3

DNS servers. The user can configure up to 6 static servers located in places 1-6. 
The other indexes are of dynamic servers which can not be created 
(learnt automatically by the device) but can be erased.				
The indexes 1-99 are for static servers (only the first 6 are configurable).
The indexes 100-199 are for dynamic servers.

cigDnsResolverDnsServerEntry row .1.3.6.1.4.1.6889.2.1.17.2.3.1

The DNS server entry. The user can configure up to 6 static servers located in places 1-6.
The other indexes are of dynamic servers which can not be created
(learnt automatically by the device) but can be erased.
…

Indexes

cigDnsResolverDnsServerListIndex cigDnsResolverDnsServerIndex

Column	Syntax	OID
cigDnsResolverDnsServerListIndex The index of the list of DNS servers. Default list index is 1. The user will not be able to create lists other then default list at the first release.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.17.2.3.1.1
cigDnsResolverDnsServerIndex The index of DNS server in the list of DNS servers. The index presents the preference of the server. The lower the index the higher priority to use it.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.17.2.3.1.2
cigDnsResolverDnsServerIpAddress The DNS server IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.17.2.3.1.3
cigDnsResolverDnsServerIfIndex A unique value for each interface. This value is same as ifIndex from ifTable. This field is used when the DNS server is learnt from interface running DHCP client or PPP negotiated (PPPoE/Dial Out modem). This field has…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.17.2.3.1.4
cigDnsResolverDnsServerType This is the server type. The user can create new row only when the server type is static. dynamic-dhcp represents DNS server learnt from DHCP client. dynamic-ppp represents DNS server learnt from ppp interface (PPPoE/Di…	Enumeration Enumerated Values: 1 static 2 dynamic-dhcp 3 dynamic-ppp	.1.3.6.1.4.1.6889.2.1.17.2.3.1.5
cigDnsResolverDnsServerRowStatus This is a row status mib item For adding and deleting DNS servers. The user can add only static servers in locations 1-6. For static servers the operation suppported is CreateAndWait and dynamic servers are automatical…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.17.2.3.1.6
cigDnsResolverDnsServerInetAddressType The address type of cigDnsResolverDnsServerInetAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6889.2.1.17.2.3.1.7
cigDnsResolverDnsServerInetAddress The Inet Address of the dns server. 1. The address type of this object is specified in cigDnsResolverDnsServerInetAddressType. 2. Management applications can use cigDnsResolverDnsServerIpAddress or cigDnsResolverDn…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6889.2.1.17.2.3.1.8

The domains used by the DNS resolver to add to non full qualified names.
I.e. when the host name is not a full host name then these domains are added 
in order to resolve the non full qulified name. 
an example for domain is : avaya.com.
an example for non qualified name  is lantis.
Therefore when trying to resolve lantis the suffix avaya.com will be added to
create the name lantis.avaya.com

cigDnsResolverDomainEntry row .1.3.6.1.4.1.6889.2.1.17.2.4.1

The Domain entry.
The domains used by the DNS resolver to add to non full qualified names.
I.e. when the host name is not a full host name then these domains are added
in order to resolve the non full qulified name.
a…

Indexes

cigDnsResolverDomainIndex

Column	Syntax	OID
cigDnsResolverDomainIndex The index of the domain. The index presents the precedence of the domain. I.e. the lower the index the higher priority this domain is used.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.17.2.4.1.1
cigDnsResolverDomain The Domain shall follow RFC 1035 Host name convention. The following syntax will result in fewer problems with many applications that use domain names (e.g., mail, TELNET). Note that while…	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.6889.2.1.17.2.4.1.2
cigDnsResolverDomainRowStatus This is a row status mib item For adding and deleting domains. The row is created by CreateAndWait.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.17.2.4.1.3