CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
31
ome6500S5EnMsTopNmmTable
table.1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1
·
1 row entry
·
14 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk ome6500S5EnMsTopNmmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB::ome6500S5EnMsTopNmmTable'
A table of topology information from each topology
agent that sends out NMM topology messages, and that
has been heard by the reporting topology agent. The
number of entries is determined by the number of
distinct topology messages received. A topology
message is identified by a combination of the IP
address and segment-identifier contained in the
message, and the slot-port on which it is received.
Entries in the table are created by reception of a
'new' NMM topology message. An entry is removed from
the table after no messages are received from the
corresponding topology agent in the required time
interval.
NOTE: there is an entry for the reporting agent with
the values of slot and port set to zero.
A row in the NMM topology table. Entries in the table
can not be created or deleted via SNMP.
can not be created or deleted via SNMP.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ome6500S5EnMsTopNmmSlotThe slot on which the topology message was received. NOTE: There is an artificial 'row' for the reporting agent with slot and port equal to zero. NOTE: Non-modular devices that do not have … | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.1 | ||||||||||||||
| ome6500S5EnMsTopNmmPortThe port on which the topology message was received. NOTE: there is an artificial 'row' for the reporting agent with slot and port equal to zero. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.2 | ||||||||||||||
| ome6500S5EnMsTopNmmIpAddrThe IP address of the sender of the topology message. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.3 | ||||||||||||||
| ome6500S5EnMsTopNmmSegIdThe 'segment identifier' of the segment from which the remote agent sent the topology message. The value is extracted from the received topology message. Different devices may use different methods for representing the… | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.4 | ||||||||||||||
| ome6500S5EnMsTopNmmMacAddrThe MAC address of the sender of the topology message. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.5 | ||||||||||||||
| ome6500S5EnMsTopNmmChassisTypeThe chassis type of the device that sent the topology message. | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.6 | |||||||||||||||
| ome6500S5EnMsTopNmmBkplTypeThe backplane type of the device that sent the topology message. | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.7 | |||||||||||||||
| ome6500S5EnMsTopNmmLocalSegIndicates if the sender of the topology message is on the same Ethernet segment (i.e., NOT across a bridge) as the reporting agent. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.8 | ||||||||||||||
| ome6500S5EnMsTopNmmCurStateThe current state of sender of the topology message. The values are: topChanged(1)...topology information has recently changed heartbeat(2)....topology information unchanged new(3)..........sen… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.9 | ||||||||||||||
| ome6500S5EnMsTopNmmInetAddressTypeThe address type of shelf.Currently only unknown and ipv6 values are expected. Value unknown will be returned if no ipv6 address is provisioned. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.10 | ||||||||||||||
| ome6500S5EnMsTopNmmInetAddressThis is Shelf's network address. Its value depends on the value of object ome6500S5EnMsTopNmmInetAddressType. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.11 | ||||||||||||||
| ome6500S5EnMsTopNmmSystemDescrThis is system_description string. Its max length shall be always 40 characters. | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.12 | ||||||||||||||
| ome6500S5EnMsTopNmmPortStringThis is Port String value from LLDP data. Its max length shall be 12 characters. | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.13 | ||||||||||||||
| ome6500S5EnMsTopNmmRxActualDataThis is the String containing LLDP information received in Rx_Actual field. This will contain the complete information for LLDP output. | RFC1213-MIBDisplayString | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.1.1.14 |
.1.3.6.1.4.1.1271.68.11.2.1.6.13.2.3
·
1 row entry
·
1 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk ome6500S5EnMsTopNmmEosTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB::ome6500S5EnMsTopNmmEosTable'
A table of encoded octet strings of entries in table ome6500S5EnMsTopNmmTable. The number of entries is determined by packing of 'rows' from ome6500S5EnMsTopNmmTable.
A row in the table of encoded octet
strings for table ome6500S5EnMsTopNmmTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned is …
strings for table ome6500S5EnMsTopNmmTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned is …
| Column | Syntax | OID |
|---|---|---|
| ome6500S5EnMsTopNmmEosAn encoded octet string. On reads it contains an integral number of 'rows' from table ome6500S5EnMsTopNmmTable. All 'rows' are the same size which is defined by object ome6500S5EnMsTopNmmEosSize. | OctetString Constraints: range: 0-1400 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.2.3.1.1 |
.1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1
·
1 row entry
·
13 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk ome6500S5EnMsTopBdgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB::ome6500S5EnMsTopBdgTable'
A table of topology information from each Bridge in the network that is sending bridge topology messages that have been heard by the reporting agent. The number of entries is determined by the number of detected (and active) bridges. Entries in the table are created by reception of a topology message from a 'new' bridge. An entry is removed from the table after no messages are received from the corresponding bridge in the required time interval.
A row in the bridge topology table. Entries in the
table can not be created or deleted via SNMP.
table can not be created or deleted via SNMP.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ome6500S5EnMsTopBdgSlotNumdeprecated The slot on which the topology message wasreceived. NOTE: Non-modular devices that do not have multiple slots should set this value to 1. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.1 | ||||||||||||
ome6500S5EnMsTopBdgPortNumdeprecated The port on which the topology message was received. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.2 | ||||||||||||
ome6500S5EnMsTopBdgIpAddrdeprecated The IP address of the bridge that sent thetopology message. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.3 | ||||||||||||
ome6500S5EnMsTopBdgNumberdeprecated The 'Bridge Number' of the bridge that sentthe topology message. This is the IEEE 802.1 bridge number. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.4 | ||||||||||||
ome6500S5EnMsTopBdgMacAddrdeprecated The MAC Address of the bridge that sent thetopology message. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.5 | ||||||||||||
ome6500S5EnMsTopBdgTypedeprecated The 'kind of bridge' that sent the topologymessage. The values are: other(1).....unknown or other type locSyn(2)....local SynOptics bridge remSyn(3)....remote SynOptics bridge kalpana(4)...Kalpana bridge(switch) | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.6 | ||||||||||||
ome6500S5EnMsTopBdgNumPortsdeprecated The number of ports on the bridge. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.7 | ||||||||||||
ome6500S5EnMsTopBdgStatusdeprecated The current operational status from the bridgethat sent the topology message. The values are: other(1).....unknown or other active(2)....bridge is active standby(3)...bridge is in standby A value … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.8 | ||||||||||||
ome6500S5EnMsTopBdgHelloPortNumdeprecated The port number used by the bridge tosend the topology message. This port may or may not be in standby mode. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.9 | ||||||||||||
ome6500S5EnMsTopBdgHelloPortTypedeprecated The type of the port used by the bridge tosend the topology message. The values are: other(1)...other or unknown type eth(2).....ethernet tok4(3)....4 Mbit token ring tok16(4)...16 Mbit token ring fddi(5)...… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.10 | ||||||||||||
ome6500S5EnMsTopBdgHelloPortStatusdeprecated The status of the port used by the bridgeto send the topology message. The values are: other(1).....unknown or other active(2)....port is active standby(3)...port is in standby | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.11 | ||||||||||||
ome6500S5EnMsTopBdgCompBdgMac1deprecated The first MAC address of a companion bridgeof the bridge that sent the topology message. The value is 00:00:00:00:00:00 for local bridges (since there is no companion bridge) and also when the companion MAC address is … | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.12 | ||||||||||||
ome6500S5EnMsTopBdgCompBdgMac2deprecated The second MAC address of a companion bridgeof the bridge that sent the topology message. The value is 00:00:00:00:00:00 for local bridges (since there is no companion bridge) and also when the companion MAC address is… | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.1.1.13 |
.1.3.6.1.4.1.1271.68.11.2.1.6.13.3.3
·
1 row entry
·
1 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk ome6500S5EnMsTopBdgEosTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB::ome6500S5EnMsTopBdgEosTable'
A table of encoded octet strings of entries in table ome6500S5EnMsTopBdgTable. The number of entries is determined by packing of 'rows' from ome6500S5EnMsTopBdgTable.
A row in the table of encoded octet
strings for table ome6500S5EnMsTopBdgTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned i…
strings for table ome6500S5EnMsTopBdgTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned i…
| Column | Syntax | OID |
|---|---|---|
ome6500S5EnMsTopBdgEosdeprecated An encoded octet string. On reads it containsan integral number of 'rows' from table ome6500S5EnMsTopBdgTable. All 'rows' are the same size which is defined by object ome6500S5EnMsTopBdgEosSize. | OctetString Constraints: range: 0-1400 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.3.3.1.1 |
.1.3.6.1.4.1.1271.68.11.2.1.6.13.4.1
·
1 row entry
·
2 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk ome6500S5EnMsTopSrcMacAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-OME6500-S5-ETH-MULTISEG-TOPOLOGY-MIB::ome6500S5EnMsTopSrcMacAddrTable'
A table describing the source MAC addresses that the
agent uses to transmit topology messages on different
segments in the device. The MAC addresses are
preallocated and remain unchanged for the agent.
However, the mapping between a MAC address and segment
may change, since it can depend on the current
physical and/or logical configuration of the device.
Implementation of this group is required for those
devices that use different source MAC addresses to
transmit topology messages on different segments.
Implementation of this group is optional otherwise.
A row in the table of MAC address-to-segment mappings.
Entries in the table can not be created or deleted
via SNMP.
Entries in the table can not be created or deleted
via SNMP.
Indexes
| Column | Syntax | OID |
|---|---|---|
ome6500S5EnMsTopSrcMacAddrdeprecated The MAC address used to transmit topology messages. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.1271.68.11.2.1.6.13.4.1.1.1 |
ome6500S5EnMsTopSrcMacSegIddeprecated The 'segment-identifier' of the segment on which topology messages were transmitted. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.1271.68.11.2.1.6.13.4.1.1.2 |