CIENA-CES-TIME-SYNC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
45

cienaCesSyncInputProtectionGroupTable

table
.1.3.6.1.4.1.1271.2.1.28.1.1.5 · 1 row entry · 12 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesSyncInputProtectionGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-TIME-SYNC-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-TIME-SYNC-MIB::cienaCesSyncInputProtectionGroupTable' 
A table of protection groups for input timing reference.
cienaCesSyncInputProtectionGroupEntry row .1.3.6.1.4.1.1271.2.1.28.1.1.5.1
An entry in this table represents information on a protection
group for input timing reference
Indexes
Column Syntax OID
cienaCesInputPGEntityId
The unique identifier of this input protection group.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.1
cienaCesInputPGEntityName
The unique name of this input protection group.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.2
cienaCesInputPGPreferredReferencedeprecated
Preferred timing reference source, configured by users.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.3
cienaCesInputPGSelectedReference
System selected timing reference source.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.4
cienaCesInputPGForcedReference
System was forced to used this timing reference source.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.5
cienaCesInputPGThresholdQualityLevel
Specified Quality Level threshold for a reference source
being selected.
SsmStratumLevel
Type Values:
1unknown
2prc
3ssua
4ssub
5sec
6dnu
7prs
8stu
9st2
10tnc
11st3e
12st3
13smc
14st4
15dus
16prov
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.6
cienaCesInputPGStatedeprecated
Configured state of this protection group.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.7
cienaCesInputPGStateDuration
Duration since the system entered current state.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.8
cienaCesInputPGReferenceSwitchCount
The number of timing reference switching since the system stared up.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.9
cienaCesInputPGOperationalStatus
Operational status of this protection group.
Enumeration
Enumerated Values:
1unknown
2freerun
3holdover
4locked
5acquiringlock
6holdoverexpired
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.10
cienaCesInputPGTimingType
The timing domain (freq/phase/tod) that this protection group belongs to.
SyncTimingType
Type Values:
1unknown
2frequency
3phase
4tod
5phaseandtod
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.11
cienaCesInputPGOperationalQualityLevel
Operational Quality Level of the protection group.
SsmStratumLevel
Type Values:
1unknown
2prc
3ssua
4ssub
5sec
6dnu
7prs
8stu
9st2
10tnc
11st3e
12st3
13smc
14st4
15dus
16prov
 .1.3.6.1.4.1.1271.2.1.28.1.1.5.1.12

cienaCesSyncInputProtectionUnitTable

table
.1.3.6.1.4.1.1271.2.1.28.1.1.6 · 1 row entry · 19 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesSyncInputProtectionUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-TIME-SYNC-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-TIME-SYNC-MIB::cienaCesSyncInputProtectionUnitTable' 
A table of protection units for input timing reference.
cienaCesSyncInputProtectionUnitEntry row .1.3.6.1.4.1.1271.2.1.28.1.1.6.1
An entry in this table represents information on a protection
unit for input timing reference.
Indexes
Column Syntax OID
cienaCesInputPUEntityId
The unique identifier of this input protection unit.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.1
cienaCesInputPUEntityName
The unique name of this input protection unit.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.2
cienaCesInputPUPGEntityName
The identifier of the input protection group(s) which this input
protection unit belongs to.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.3
cienaCesInputPUTimingInterfaceName
The interface name of this input protection unit.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.4
cienaCesInputPUTimingInterfaceProtocol
The interface protocol of this input protection unit.
SyncInterfaceProtocol
Type Values:
1unknown
2bits
3synce
4ptp
5gps
6tdm
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.5
cienaCesInputPUUserPriority
The user configured priority of this input protection unit.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.6
cienaCesInputPUOperationalQL
Operational clock quality level of this input protection unit.
SsmStratumLevel
Type Values:
1unknown
2prc
3ssua
4ssub
5sec
6dnu
7prs
8stu
9st2
10tnc
11st3e
12st3
13smc
14st4
15dus
16prov
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.7
cienaCesInputPUForcedQL
User configured clock quality level that this input protection unit
is forced to operate at.
SsmStratumLevel
Type Values:
1unknown
2prc
3ssua
4ssub
5sec
6dnu
7prs
8stu
9st2
10tnc
11st3e
12st3
13smc
14st4
15dus
16prov
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.8
cienaCesInputPUReceivedQL
Actual received clock quality level of this input protection unit.
SsmStratumLevel
Type Values:
1unknown
2prc
3ssua
4ssub
5sec
6dnu
7prs
8stu
9st2
10tnc
11st3e
12st3
13smc
14st4
15dus
16prov
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.9
cienaCesInputPUSsmEnabled
Enable/disable reading of actual received clock quality level for
this input protection unit.
Enumeration
Enumerated Values:
1unknown
2disabled
3enabled
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.10
cienaCesInputPUOperationalStatus
Operational status of this input protection unit.
SyncRefOperationalStatus
Type Values:
1unknown
2active
3selected
4lossofsignal
5lossofframe
6alarmindicationsignal
7hardwarefault
8hardwarenotconfigured
9qlbelowthreshold
10rxtimeout
11notauthenticated
12loopbacktx
13loopbackrx
14linkflap
15notready
16signalfailure
17warmup
18qlnotconfigured
19noconnectivity
20unsupportedhardware
21unusable
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.11
cienaCesInputPUBITSSignalMode
BITS Signal Mode, set if BITS signal is used as a protection unit.
SyncBITSSignalMode
Type Values:
1modeunknown
2modet1
3modee1
4modej1
5mode2048khz
6mode64kcc
7mode6312khz
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.12
cienaCesInputPUBITSSignalFormat
BITS Signal Format, set if BITS signal is used as a protection unit.
SyncBITSSignalFormat
Type Values:
1unknown
2cas
3cascrc
4esf
5fas
6fascrc
7sf
8e1crc
9e1nocrc
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.13
cienaCesInputPUBITSSignalEncoding
BITS Signal encoding, set if BITS signal is used as a protection unit.
SyncBITSSignalEncoding
Type Values:
1unknown
2b8zs
3ami
4hdb3
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.14
cienaCesInputPUUserOverridePriority
The user configured override-priority of this input protection unit.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.15
cienaCesInputPUPTPEncapType
PTP Encapsulation Type, set if a PTP input is used as a protection unit.
SyncPTPEncapType
Type Values:
1unknown
2udpoveripv4
3udpoveripv6
4ieee802dot3
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.16
cienaCesInputPUGPSClockMode
GPS clock mode, set if a GPS input is used as a protection unit.
SyncTimingType
Type Values:
1unknown
2frequency
3phase
4tod
5phaseandtod
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.17
cienaCesInputPUGPSFreqClock
GPS frequency clock, set if a GPS input is used as a protection unit and the
cienaCesInputPUGPSClockMode is set to frequency.
SyncGPSFreqClock
Type Values:
1unknown
2clock10mhz
3clock2048khz
4clock1544khz
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.18
cienaCesInputPUBITSSignalSsmLocation
BITS Signal Ssm Location, set if BITS signal is used as an input reference.
Enumeration
Enumerated Values:
1unknown
2sa4
3sa5
4sa6
5sa7
6sa8
 .1.3.6.1.4.1.1271.2.1.28.1.1.6.1.19

cienaCesSyncOutputTable

table
.1.3.6.1.4.1.1271.2.1.28.1.1.7 · 1 row entry · 14 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesSyncOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-TIME-SYNC-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-TIME-SYNC-MIB::cienaCesSyncOutputTable' 
A table of output timing references.
cienaCesSyncOutputEntry row .1.3.6.1.4.1.1271.2.1.28.1.1.7.1
An entry in this table represents information for an output
timing reference.
Indexes
Column Syntax OID
cienaCesOutputEntityId
The unique identifier of this output reference entity.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.1
cienaCesOutputEntityName
The unique name of this output reference entity.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.2
cienaCesOutputTimingInterfaceName
The interface name of this output reference.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.3
cienaCesOutputTimingInterfaceProtocol
The interface protocol of this output reference.
SyncInterfaceProtocol
Type Values:
1unknown
2bits
3synce
4ptp
5gps
6tdm
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.4
cienaCesOutputOperationalQL
Operational clock quality level of this output reference.
SsmStratumLevel
Type Values:
1unknown
2prc
3ssua
4ssub
5sec
6dnu
7prs
8stu
9st2
10tnc
11st3e
12st3
13smc
14st4
15dus
16prov
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.5
cienaCesOutputOperationalStatus
Operational status of this output reference.
SyncRefOperationalStatus
Type Values:
1unknown
2active
3selected
4lossofsignal
5lossofframe
6alarmindicationsignal
7hardwarefault
8hardwarenotconfigured
9qlbelowthreshold
10rxtimeout
11notauthenticated
12loopbacktx
13loopbackrx
14linkflap
15notready
16signalfailure
17warmup
18qlnotconfigured
19noconnectivity
20unsupportedhardware
21unusable
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.6
cienaCesOutputBITSSignalMode
BITS Signal Mode, set if BITS signal is used as an output reference.
SyncBITSSignalMode
Type Values:
1modeunknown
2modet1
3modee1
4modej1
5mode2048khz
6mode64kcc
7mode6312khz
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.7
cienaCesOutputBITSSignalFormat
BITS Signal Format, set if BITS signal is used as an output reference.
SyncBITSSignalFormat
Type Values:
1unknown
2cas
3cascrc
4esf
5fas
6fascrc
7sf
8e1crc
9e1nocrc
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.8
cienaCesOutputBITSSignalEncoding
BITS Signal encoding, set if BITS signal is used as an output reference.
SyncBITSSignalEncoding
Type Values:
1unknown
2b8zs
3ami
4hdb3
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.9
cienaCesOutputBITSSignalLineBuildout
BITS Signal Line Buildout, set if BITS signal is used as an output reference.
Enumeration
Enumerated Values:
1unknown
2lbo133
3lbo266
4lbo399
5lbo533
6lbo655
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.10
cienaCesOutputBITSSignalSsmLocation
BITS Signal Ssm Location, set if BITS signal is used as an output reference.
Enumeration
Enumerated Values:
1unknown
2sa4
3sa5
4sa6
5sa7
6sa8
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.11
cienaCesOutputGPSClockMode
GPS clock mode, set if a GPS signal is used as an output reference.
SyncTimingType
Type Values:
1unknown
2frequency
3phase
4tod
5phaseandtod
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.12
cienaCesOutputGPSFreqClock
GPS frequency clock, set if a GPS signal is used as an output reference and the
cienaCesOutputGPSClockMode is set to frequency.
SyncGPSFreqClock
Type Values:
1unknown
2clock10mhz
3clock2048khz
4clock1544khz
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.13
cienaCesOutputPTPEncapType
PTP Encapsulation Type, set if a PTP output is used as an output reference.
SyncPTPEncapType
Type Values:
1unknown
2udpoveripv4
3udpoveripv6
4ieee802dot3
 .1.3.6.1.4.1.1271.2.1.28.1.1.7.1.14