Standard view Table view

CIENA-CES-PORT-XCVR-MIB

Monitored by Observium 
        This module defines the port XCVR related notifications.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors
Explore Observium network monitoring
Source file
CIENA-CES-PORT-XCVR-MIB
Last revised
Identity
cienaCesPortXcvrMIB
Base OID
1.3.6.1.4.1.1271.2.1.9
Imported Objects
CIENA-GLOBAL-MIB cienaGlobalMacAddress cienaGlobalSeverity
CIENA-SMI cienaCesConfig cienaCesNotifications
SNMPv2-SMI Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString
Net-SNMP examples using the ciena MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CIENA-CES-PORT-XCVR-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CIENA-CES-PORT-XCVR-MIB::cienaCesPortXcvrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-PORT-XCVR-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-PORT-XCVR-MIB::cienaCesPortXcvrMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (48)
5 directly used by Observium
cienaCesPortXcvrMIB
.1.3.6.1.4.1.1271.2.1.9
cienaCesPortXcvrMIBObjects
.1.3.6.1.4.1.1271.2.1.9.1
cienaCesPortXcvr
.1.3.6.1.4.1.1271.2.1.9.1.1
cienaCesPortXcvrTable
.1.3.6.1.4.1.1271.2.1.9.1.1.1
cienaCesPortXcvrEntry
cienaCesPortXcvrId
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1
cienaCesPortXcvrId
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.1
cienaCesPortXcvrLowVccAlarmThreshold
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.10
cienaCesPortXcvrHighBiasAlarmThreshold
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.11
cienaCesPortXcvrLowBiasAlarmThreshold
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.12
cienaCesPortXcvrHighTxPwAlarmThreshold
uWSNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.13
cienaCesPortXcvrLowTxPwAlarmThreshold
uWSNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.14
cienaCesPortXcvrHighRxPwAlarmThreshold
uWSNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.15
cienaCesPortXcvrLowRxPwAlarmThreshold
uWSNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.16
cienaCesPortXcvrNotifChassisIndex
Unsigned32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.17
cienaCesPortXcvrNotifShelfIndex
Unsigned32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.18
cienaCesPortXcvrNotifSlotIndex
Unsigned32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.19
cienaCesPortXcvrOperState
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.2
cienaCesPortXcvrNotifPortNumber
Unsigned32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.20
cienaCesPortXcvrIdentiferType
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.21
cienaCesPortXcvrExtIdentiferType
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.22
cienaCesPortXcvrConnectorType
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.23
cienaCesPortXcvrType
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.24
cienaCesPortXcvrVendorName
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.25
cienaCesPortXcvrVendorOUI
OctetString
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.26
cienaCesPortXcvrVendorPartNum
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.27
cienaCesPortXcvrRevNum
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.28
cienaCesPortXcvrSerialNum
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.29
cienaCesPortXcvrTemperature OBS ✓
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.3
cienaCesPortXcvrMfgDate
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.30
cienaCesPortXcvrWaveLength
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.31
cienaCesPortXcvrTxState
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.32
cienaCesPortXcvrTxFaultStatus
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.33
cienaCesPortXcvrAdminState
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.34
cienaCesPortXcvrTxOutputPower OBS ✓
uWInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.35
cienaCesPortXcvrVcc OBS ✓
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.4
cienaCesPortXcvrBias OBS ✓
Integer32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.5
cienaCesPortXcvrRxPower OBS ✓
uWInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.6
cienaCesPortXcvrHighTempAlarmThreshold
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.7
cienaCesPortXcvrLowTempAlarmThreshold
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.8
cienaCesPortXcvrHighVccAlarmThreshold
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.1271.2.1.9.1.1.1.1.9
cienaCesPortXcvrNotif
.1.3.6.1.4.1.1271.2.1.9.1.2
cienaCesPortXcvrEventType
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.2.1
cienaCesPortXcvrErrorType
Enumeration
 .1.3.6.1.4.1.1271.2.1.9.1.2.2
cienaCesPortXcvrMIBConformance
.1.3.6.1.4.1.1271.2.1.9.3
cienaCesPortXcvrMIBCompliances
.1.3.6.1.4.1.1271.2.1.9.3.1
cienaCesPortXcvrMIBGroups
.1.3.6.1.4.1.1271.2.1.9.3.2
cienaCesPortXcvrMIBNotificationPrefix
.1.3.6.1.4.1.1271.2.2.9
cienaCesPortXcvrMIBNotifications
.1.3.6.1.4.1.1271.2.2.9.0
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CIENA-SMIciena
  3. SNMPv2-TCrfc
  4. CIENA-TCciena
  5. CIENA-GLOBAL-MIBciena
  6. CIENA-CES-PORT-XCVR-MIBcienaselected
Notifications / Traps (20)
NameOIDDescription
cienaCesPortXcvrRemovedNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.1
A cienaCesPortXcvrRemovedNotification is sent if the transceiver has been removed.
To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to
enabled. These objects are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex,
cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and
cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrVoltageLowNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.10
A cienaCesPortXcvrVoltageLowNotification is sent if the transceiver voltage falls below the
threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrVoltageNormalNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.11
A cienaCesPortXcvrVoltageNormalNotification is sent when the transceiver voltage returns back
to normal state. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrBiasHighNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.12
A cienaCesPortXcvrBiasHighNotification is sent if the transceiver bias exceeds the
threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrBiasLowNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.13
A cienaCesPortXcvrBiasLowNotification is sent if the transceiver bias falls below the
threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrBiasNormalNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.14
A cienaCesPortXcvrBiasNormalNotification is sent when the transceiver bias returns to normal
state. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrTxPowerHighNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.15
A cienaCesPortXcvrTxPowerHighNotification is sent if the transceiver TxPower exceeds the
threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrTxPowerLowNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.16
A cienaCesPortXcvrTxPowerLowNotification is sent if the transceiver TxPower falls below
the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrTxPowerNormalNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.17
A cienaCesPortXcvrTxPowerNormalNotification is sent when the transceiver TxPower returns to
normal state. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrRxPowerHighNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.18
A cienaCesPortXcvrRxPowerHighNotification is sent if the transceiver RxPower exceeds
the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrRxPowerLowNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.19
A cienaCesPortXcvrRxPowerLowNotification is sent if the transceiver RxPower falls below
the the threshold. To enable the device to send this notification:
cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState,
cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled
by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress,
cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex,
and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrInsertedNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.2
A cienaCesPortXcvrInsertedNotification is sent if the transceiver has been inserted. To
enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to
enabled. These objects are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex,
cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and
cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrRxPowerNormalNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.20
A cienaCesPortXcvrRxPowerNormalNotification is sent when the transceiver RxPower returns
to normal state. To enable the device to send this notification:
cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and
cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by
default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress,
cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex,
and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrSpeedInfoMissingNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.21
A cienaCesPortXcvrSpeedInfoMissingNotification is sent if the transceiver speed
information is not found. To enable the device to send this notification:
cienaCesPortXcvrSpeedInfoTrapState, cienaCesLogicalPortConfigPortAllTrapState, and
cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled
by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress,
cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrUncertifiedNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.22
A cienaCesPortXcvrUncertifiedNotification is sent if the transceiver is not
certified for use by Ciena. To enable the device to send this notification:
cienaCesPortXcvrUncertifiedTrapState, cienaCesLogicalPortConfigPortAllTrapState,
and cesPortAllTrapState need to be set to enabled. cienaCesPortXcvrUncertifiedTrapState
is set to disabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress,
cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrErrorTypeNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber cienaCesPortXcvrErrorType
.1.3.6.1.4.1.1271.2.2.9.0.5
A cienaCesPortXcvrErrorTypeNotification is sent if the transceiver is detected to be faulted.
The reason for the failure is specified by cienaCesPortXcvrErrorType. To enable the device to
send this notification: cienaCesPortXcvrErrorTrapState, cienaCesLogicalPortConfigPortAllTrapState,
and cienaCesPortAllTrapState need to be set to enabled. These objects are enabled by default.
Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress,
cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex,
cienaCesPortXcvrNotifPortNumber, and cienaCesPortXcvrErrorType.
cienaCesPortXcvrTempHighNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.6
A cienaCesPortXcvrTempHighNotification is sent if the transceiver temperature exceeds the
threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrTempLowNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.7
A cienaCesPortXcvrTempLowNotification is sent if the transceiver temperature falls below the
threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrTempNormalNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.8
A cienaCesPortXcvrTempNormalNotification is sent when the transceiver temperature returns to
normal state. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled.
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex,
cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
cienaCesPortXcvrVoltageHighNotification
CIENA-GLOBAL-MIBcienaGlobalSeverity CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaCesPortXcvrNotifChassisIndex cienaCesPortXcvrNotifShelfIndex cienaCesPortXcvrNotifSlotIndex cienaCesPortXcvrNotifPortNumber
.1.3.6.1.4.1.1271.2.2.9.0.9
A cienaCesPortXcvrVoltageHighNotification is sent if the transceiver voltage exceeds the
threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState,
cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled
These objects are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex,
cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and
cienaCesPortXcvrNotifPortNumber.