CIENA-CES-LOOP-DETECTION-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
10
.1.3.6.1.4.1.1271.2.1.50.1.1.2
·
1 row entry
·
9 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesLoopDetectionPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-LOOP-DETECTION-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-LOOP-DETECTION-MIB::cienaCesLoopDetectionPortTable'
A table of Loop Detection Port Entries.
The Loop Detection Port entry in the Table.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Port ID for the instance. This Port ID refers to
index in loop Detection Port Entry. |
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.1 |
||||||
|
A textual string containing information about the
port. This string should indicate the physical location of the port as well. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.2 |
||||||
|
This object specifies the current status of Per Port of Loop
Detection, i.e. whether loop-detection is enabled or disabled on port level. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.3 |
||||||
|
This object specifies the current action configured on port
if loop is detected in network. 1)g8032 - It will Block the traffic. 2)portshut - It will shut down the Port in order to completely stop the traffic. 3)notify… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.4 |
||||||
|
This object specifies the ability to revert action on port
after expiry of configured reversion hold-off time if no loop is present on port, it will resume traffic. If revertive mode is off, then loop-detection is req… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.5 |
||||||
|
This object specifies the current operational state for the given Port,
i.e. If loop-detection is enabled on both system and port level and conditioning done, it will be shown enabled. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.6 |
||||||
|
This object specifies whether loop is present on given Port,
If loop is present then configured action will be applied automatically. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.7 |
||||||
|
This object specifies the current Loop Occurrence Count,
i.e. how many times loop has been detected on per port basis |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.8 |
||||||
|
This object specifies the hold-off time in which the action
applied on detection of loop should be applied after expiry of configured hold-off time. |
millisecondsInteger32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.1271.2.1.50.1.1.2.1.9 |
.1.3.6.1.4.1.1271.2.1.50.1.1.3
·
1 row entry
·
1 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesLoopDetectionPortCfmServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-LOOP-DETECTION-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-LOOP-DETECTION-MIB::cienaCesLoopDetectionPortCfmServiceTable'
The (conceptual) table listing CFM domain entry service index used for loop detection for each port.
An entry (conceptual row) in the cienaCesLoopDetectionPortCfmServiceTable.
| Column | Syntax | OID |
|---|---|---|
|
This object specifies the CFM domain entry service index . It is also used as an index in the table.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1271.2.1.50.1.1.3.1.1 |