CIENA-CES-DHCPV6-CLIENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
116

cienaCesDhcpv6ClientOptionTable

table
.1.3.6.1.4.1.1271.2.1.30.1.1.7 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6ClientOptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6ClientOptionTable' 
List of options supported by the DHCPv6 client.
cienaCesDhcpv6ClientOptionEntry row .1.3.6.1.4.1.1271.2.1.30.1.1.7.1
An entry containing list of options supported by DHCPv6 client.
Indexes
Column Syntax OID
cienaCesDhcpv6OptionCodeIndex
Specifies the index used for this entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.1.7.1.1
cienaCesDhcpv6OptionDesc
Specifies the description for the given DHCPv6 option code.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.30.1.1.7.1.2
cienaCesDhcpv6OptionCode
Specifies the option code specified by RFC specification.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.7.1.3
cienaCesDhcpv6OptionState
Specifies if the given option is enabled/disabled.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.1.7.1.4

cienaCesDhcpv6ClientSessTable

table
.1.3.6.1.4.1.1271.2.1.30.1.1.8 · 1 row entry · 13 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6ClientSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6ClientSessTable' 
List of active DHCPv6 client sessions.
cienaCesDhcpv6ClientSessEntry row .1.3.6.1.4.1.1271.2.1.30.1.1.8.1
An entry in the cienaCesDhcpv6ClientSessTable.
Indexes
Column Syntax OID
cienaCesDhcpv6ClientSessMgmtIntfIndex
The mgmt interface index.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.1
cienaCesDhcpv6ClientSessState
The DHCPv6 client state of this session.
Enumeration
Enumerated Values:
1disabled
2init
3bound
4renewing
5rebinding
6solicit
7request
8reconfigure
99unknown
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.2
cienaCesDhcpv6ClientSessAutoConfigState
The DHCPv6 autoconfiguration state of this session
set by the router advertisement.
Enumeration
Enumerated Values:
1none
2stateless
3stateful
99unknown
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.3
cienaCesDhcpv6ClientSessUpTime
The total length of time that this session has had active
lease(s).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.4
cienaCesDhcpv6ClientSessPrefLifetime
The preferred lifetime in seconds of the current lease.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.5
cienaCesDhcpv6ClientSessValidLifetime
The valid lifetime in seconds of the current lease.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.6
cienaCesDhcpv6ClientSessLeaseExpire
The remaining seconds until the current lease expires.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.7
cienaCesDhcpv6ClientSessClientId
The full 'client ID' value associated with this lease.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.8
cienaCesDhcpv6ClientSessServerIpAddrType
The IP address type (IPv6) of the server from which this lease was obtained.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.9
cienaCesDhcpv6ClientSessServerIpAddr
The IP address of the server from which this lease was obtained.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.10
cienaCesDhcpv6ClientSessServerId
The full 'server ID' value associated with this lease.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.11
cienaCesDhcpv6ClientSessT1Time
The lease renewal (T1) time in seconds.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.12
cienaCesDhcpv6ClientSessT2Time
The lease rebind (T2) time in seconds.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.30.1.1.8.1.13

cienaCesDhcpv6ClientSessStatsTable

table
.1.3.6.1.4.1.1271.2.1.30.1.1.9 · 1 row entry · 17 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6ClientSessStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6ClientSessStatsTable' 
The (conceptual) table listing the statistics 
for DHCPv6 per interface
cienaCesDhcpv6ClientSessStatsEntry row .1.3.6.1.4.1.1271.2.1.30.1.1.9.1
An entry (conceptual row) in the cienaCesDhcpv6ClientSessStatsTable.
Indexes
Column Syntax OID
cienaCesDhcpv6ClientSessStatsMgmtIntfIndex
The mgmt interface index.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.1
cienaCesDhcpv6ClientSessStatsClear
This object clears the DHCPv6 session statistics.
CIENA-TCCienaStatsClearr/w
Type Values:
0none
1clear
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.2
cienaCesDhcpv6ClientSessStatsPktsRx
The number of DHCPv6 packets received by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.3
cienaCesDhcpv6ClientSessStatsReply
The number of DHCPv6 reply messages received by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.4
cienaCesDhcpv6ClientSessStatsAdvert
The number of DHCPv6 advertise messages received by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.5
cienaCesDhcpv6ClientSessStatsRecfg
The number of DHCPv6 reconfigure messages received by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.6
cienaCesDhcpv6ClientSessStatsInvalid
The number of DHCPv6 invalid messages received by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.7
cienaCesDhcpv6ClientSessStatsPktsTx
The number of DHCPv6 messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.8
cienaCesDhcpv6ClientSessStatsSolicit
The number of DHCPv6 solicit messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.9
cienaCesDhcpv6ClientSessStatsRequest
The number of DHCPv6 request messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.10
cienaCesDhcpv6ClientSessStatsConfirm
The number of DHCPv6 confirm messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.11
cienaCesDhcpv6ClientSessStatsRenew
The number of DHCPv6 renew messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.12
cienaCesDhcpv6ClientSessStatsRebind
The number of DHCPv6 rebind messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.13
cienaCesDhcpv6ClientSessStatsInfoReq
The number of DHCPv6 information request messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.14
cienaCesDhcpv6ClientSessStatsRelease
The number of DHCPv6 release messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.15
cienaCesDhcpv6ClientSessStatsDecline
The number of DHCPv6 decline messages sent by the client.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.16
cienaCesDhcpv6ClientSessStatsTxFail
The number of DHCPv6 messages the client was unable to send.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.1.9.1.17

cienaCesDhcpv6LdraStateTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraStateTable' 
Table allows changing configuration of DHCPv6 LDRA functionality
for each cienaCesDhcpv6LdraVlan.
cienaCesDhcpv6LdraStateEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.2.1
Entry in the table to configure DHCPv6 LDRA functionality.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraVlan
This object specifies the VLAN on which DHCPv6 LDRA is configured.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.1271.2.1.30.1.2.2.1.1
cienaCesDhcpv6LdraAdminState
This object allows the user to disable or enable DHCPv6 LDRA functionality on
the given VLAN specified by cienaCesDhcpv6LdraVlan.
CIENA-TCCienaGlobalStater/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.2.2.1.2
cienaCesDhcpv6LdraOperState
This object shows the operational status of the DHCPv6 LDRA on given VLAN.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.2.2.1.3
cienaCesDhcpv6LdraRowStatus
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying
on the VLAN specified by cienaCesDhcpv6LdraVlan.

Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying
on the VLAN specified by cie…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.2.1.4

cienaCesDhcpv6LdraTrustTable

table deprecated
.1.3.6.1.4.1.1271.2.1.30.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraTrustTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraTrustTable' 
This table is used to specify the slot / ports and VLANs
that the DHCPv6 LDRA can trust.
          
This table has been deprecated in favor of the
cienaCesDhcpv6LdraExtTrustTable which adds a column for port
status.
cienaCesDhcpv6LdraTrustEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.3.1
Each entry in this table is used to specify the slot / port and VLAN to be trusted.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraPort
This object is used as an index in the table and is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.2.3.1.1
cienaCesDhcpv6LdraTrustModedeprecated
This object is used to set the port as client trusted, server
trusted or not trusted.

Note that the client(1) mode is deprecated. That value will
never be returned. Setting that value will set the mode to…
Enumerationr/w
Enumerated Values:
1client
2clientTrust
3serverTrust
4dualRoleTrust
5unTrust
 .1.3.6.1.4.1.1271.2.1.30.1.2.3.1.2

cienaCesDhcpv6LdraStatsTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.4 · 1 row entry · 14 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraStatsTable' 
Table to display L2 statistics for each cienaCesDhcpv6LdraVlan.
cienaCesDhcpv6LdraStatsEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.4.1
Entry in the table to display LDRA stats.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraPktsForRelay
This object specifies the number of packets sent to this relay process.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.1
cienaCesDhcpv6LdraRelayedClient
This object specifies the number of client sourced DHCPv6 packets relayed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.2
cienaCesDhcpv6LdraRelayedServer
This object specifies the number of server sourced DHCPv6 packets relayed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.3
cienaCesDhcpv6LdraUntrustedClientPortPktsRx
This object specifies the number of client DHCPv6 packets dropped because they were
received on untrusted client ports.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.4
cienaCesDhcpv6LdraUntrustedServerPortPktsRx
This object specifies the number of server DHCPv6 packets dropped because they were
received on untrusted server ports.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.5
cienaCesDhcpv6LdraFailedValidationPktDrop
This object specifies the number of DHCPv6 packets dropped due to failed validation.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.6
cienaCesDhcpv6LdraInvalidConfigPktDrop
This object specifies the number of DHCPv6 packets dropped due
to LDRA configuration issues.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.7
cienaCesDhcpv6LdraExceededHopCountPktDrop
This object specifies the number of DHCPv6 packets dropped due to hop count
in the packet exceeding hop count the limit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.8
cienaCesDhcpv6LdraExceedMTUPktDrop
This object specifies the number of DHCPv6 packets dropped because the new
relay frame size would exceed the MTU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.9
cienaCesDhcpv6LdraNoTrustedServerPktDrop
This object specifies the number of DHCPv6 packets dropped because there are no server trusted ports configured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.10
cienaCesDhcpv6LdraNoTrustedClientPktDrop
This object specifies the number of DHCPv6 packets dropped because there are no client trusted ports configured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.11
cienaCesDhcpv6LdraIPv6FragBadExtHdrPktDrop
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet
extension headers that could not be processed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.12
cienaCesDhcpv6LdraGeneralErrors
This object specifies the number of DHCPv6 packets dropped due to unclassified errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.13
cienaCesDhcpv6LdraStatsClear
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
CIENA-TCCienaStatsClearr/w
Type Values:
0none
1clear
 .1.3.6.1.4.1.1271.2.1.30.1.2.4.1.14

cienaCesDhcpv6LdraIntidStringTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.5 · 1 row entry · 3 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraIntidStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraIntidStringTable' 
This table is used to specify CID strings for slot / ports
and VLANs that the DHCP relay agent can specify in Option 82 CID
information.
cienaCesDhcpv6LdraIntidStringEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.5.1
Each entry in this table is used to specify an interface id string for slot / port and VLAN combinations.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraIntidStringPort
This object is used as an index in the table and is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.2.5.1.1
cienaCesDhcpv6LdraIntidString
This object is used to get and set the IntID string for the port.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1271.2.1.30.1.2.5.1.2
cienaCesDhcpv6LdraIntidStringRowStatus
Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table set this object to 'createAndGo'.
To delete a row in this table set this object to 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.5.1.3

cienaCesDhcpv6LdraRidStringTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraRidStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraRidStringTable' 
This table is used to specify RID strings for slot / ports
and VLANs that the DHCP relay agent can specify in Option 82 RID
information.
cienaCesDhcpv6LdraRidStringEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.6.1
Each entry in this table is used to specify an RID string for
slot / port and VLAN combinations.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraRidStringPort
This MIB object is used as an index in the table and is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.2.6.1.1
cienaCesDhcpv6LdraRidString
This MIB object is used to get and set the RID string for the port.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1271.2.1.30.1.2.6.1.2
cienaCesDhcpv6LdraRidStringRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table set this object
to 'createAndGo'.

To delete a row in this table set this object
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.6.1.3

cienaCesDhcpv6LdraExtTrustTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.7 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraExtTrustTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraExtTrustTable' 
This table is used to specify the ports and VLANs that the
DHCPv6 LDRA can trust. This table is the same as
cienaCesDhcpv6LdraTrustTable with the addition of a column for
the port status.
cienaCesDhcpv6LdraExtTrustEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.7.1
Each entry in this table is used to specify the port and VLAN to
be trusted.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraExtPortState
This object reports whether the specified port is active or
inactive.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.1271.2.1.30.1.2.7.1.1
cienaCesDhcpv6LdraExtTrustMode
This object is used to set the port as client trusted, server
trusted or not trusted.

Note that the client(1) mode is deprecated. That value will
never be returned. Setting that value will set the mode to…
Enumerationr/w
Enumerated Values:
1client
2clientTrust
3serverTrust
4dualRoleTrust
5unTrust
 .1.3.6.1.4.1.1271.2.1.30.1.2.7.1.2

cienaCesDhcpv6LdraVsStateTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.8 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraVsStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraVsStateTable' 
Table allows changing configuration of DHCPv6 LDRA functionality
for each VS.
cienaCesDhcpv6LdraVsStateEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.8.1
Entry in the table to configure DHCPv6 LDRA functionality.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraVsVlan
This object specifies the VS VLAN on which the DHCPv6 LDRA is configured.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.1271.2.1.30.1.2.8.1.1
cienaCesDhcpv6LdraVsName
This object shows the name of the VS VLAN on which the DHCPv6 LDRA is configured.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.30.1.2.8.1.2
cienaCesDhcpv6LdraVsAdminState
This object allows the user to disable or enable DHCPv6 LDRA functionality on
the given VS VLAN specified by cienaCesDhcpv6LdraVsVlan.
CIENA-TCCienaGlobalStater/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.2.8.1.3
cienaCesDhcpv6LdraVsOperState
This object shows the operational status of the DHCPv6 LDRA on
the given VS VLAN.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.2.8.1.4
cienaCesDhcpv6LdraVsRowStatus
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying
on the VS VLAN specified by cienaCesDhcpv6LdraVsVlan.

Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying
on the VS VLAN specifie…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.8.1.5

cienaCesDhcpv6LdraVsTrustTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.9 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraVsTrustTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraVsTrustTable' 
This table is used to specify the VLANs, ports and sub-VLANs
that the DHCPv6 LDRA can trust.
cienaCesDhcpv6LdraVsTrustEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.9.1
Each entry in this table is used to specify the VLAN, port and
sub-VLAN to be trusted.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraVsPort
This object is used as an index in the table and is used to specify the VS port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.30.1.2.9.1.1
cienaCesDhcpv6LdraVsSubVlan
This object specifies the sub-VLAN on which the DHCPv6 LDRA
is configured. Note that the special value 0 means that no
sub-VLAN is associated with this particular trust entry.
Integer32
Constraints:
range: 0-24576
 .1.3.6.1.4.1.1271.2.1.30.1.2.9.1.2
cienaCesDhcpv6LdraVsPortState
This object reports whether the specified port and sub-VLAN is
active or inactive.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.1271.2.1.30.1.2.9.1.3
cienaCesDhcpv6LdraVsTrustMode
This object is used to set the port and sub-VLAN as client
trusted, server trusted or not trusted.

Note that the client(1) mode is deprecated. That value will
never be returned. Setting that value will se…
Enumerationr/w
Enumerated Values:
1client
2clientTrust
3serverTrust
4dualRoleTrust
5unTrust
 .1.3.6.1.4.1.1271.2.1.30.1.2.9.1.4

cienaCesDhcpv6LdraVsStatsTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.10 · 1 row entry · 14 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraVsStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraVsStatsTable' 
Table to display VS statistics for each VS LDRA.
cienaCesDhcpv6LdraVsStatsEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.10.1
Entry in the table to display VS LDRA statistics.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraVsPktsForRelay
This object specifies the number of packets sent to this relay process.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.1
cienaCesDhcpv6LdraVsRelayedClient
This object specifies the number of client sourced DHCPv6 packets relayed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.2
cienaCesDhcpv6LdraVsRelayedServer
This object specifies the number of server sourced DHCPv6 packets relayed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.3
cienaCesDhcpv6LdraVsUntrustedClientPortPktsRx
This object specifies the number of client DHCPv6 packets dropped because they were
received on untrusted client ports.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.4
cienaCesDhcpv6LdraVsUntrustedServerPortPktsRx
This object specifies the number of server DHCPv6 packets dropped because they were
received on untrusted server ports.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.5
cienaCesDhcpv6LdraVsFailedValidationPktDrop
This object specifies the number of DHCPv6 packets dropped due to failed validation.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.6
cienaCesDhcpv6LdraVsInvalidConfigPktDrop
This object specifies the number of DHCPv6 packets dropped due
to LDRA configuration issues.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.7
cienaCesDhcpv6LdraVsExceededHopCountPktDrop
This object specifies the number of DHCPv6 packets dropped due to hop count
in the packet exceeding hop count the limit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.8
cienaCesDhcpv6LdraVsExceedMTUPktDrop
This object specifies the number of DHCPv6 packets dropped because the new
relay frame size would exceed the MTU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.9
cienaCesDhcpv6LdraVsNoTrustedServerPktDrop
This object specifies the number of DHCPv6 packets dropped
because there are no server trusted ports configured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.10
cienaCesDhcpv6LdraVsNoTrustedClientPktDrop
This object specifies the number of DHCPv6 packets dropped
because there are no client trusted ports configured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.11
cienaCesDhcpv6LdraVsIPv6FragBadExtHdrPktDrop
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet
extension headers that could not be processed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.12
cienaCesDhcpv6LdraVsGeneralErrors
This object reports the number of DHCPv6 packets dropped due to unclassified errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.13
cienaCesDhcpv6LdraVsStatsClear
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
CIENA-TCCienaStatsClearr/w
Type Values:
0none
1clear
 .1.3.6.1.4.1.1271.2.1.30.1.2.10.1.14

cienaCesDhcpv6LdraVsIntidStringTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.11 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraVsIntidStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraVsIntidStringTable' 
This table is used to specify CID strings for VS ports and VLANs
that the LDRA can specify in Option 82 CID information.
cienaCesDhcpv6LdraVsIntidStringEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.11.1
Each entry in this table is used to specify an interface ID
string for VS port and VLAN combinations.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraVsIntidString
This object is used to get and set the IntID string for the port.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1271.2.1.30.1.2.11.1.1
cienaCesDhcpv6LdraVsIntidStringRowStatus
Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table set this object to 'createAndGo'.
To delete a row in this table set this object to 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.11.1.2

cienaCesDhcpv6LdraVsRidStringTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.12 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraVsRidStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraVsRidStringTable' 
This table is used to specify RID strings for VS ports and VLANs
that the DHCPv6 LDRA can specify in Option 82 RID information.
cienaCesDhcpv6LdraVsRidStringEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.12.1
Each entry in this table is used to specify an RID string for
VS port and VLAN combinations.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraVsRidString
This MIB object is used to get and set the RID string for the port.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1271.2.1.30.1.2.12.1.1
cienaCesDhcpv6LdraVsRidStringRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table set this object
to 'createAndGo'.

To delete a row in this table set this object
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.12.1.2

cienaCesDhcpv6LdraMplsStateTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.13 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraMplsStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraMplsStateTable' 
Table allows changing configuration of DHCPv6 LDRA functionality
for each MPLS VS.
cienaCesDhcpv6LdraMplsStateEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.13.1
Entry in the table to configure DHCPv6 LDRA functionality.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraMplsId
This object specifies the MPLS VS on which DHCPv6 LDRA is configured.
Unsigned32
Constraints:
range: 1-1677215
 .1.3.6.1.4.1.1271.2.1.30.1.2.13.1.1
cienaCesDhcpv6LdraMplsName
This object shows the name of the MPLS VS on which DHCPv6 LDRA
is configured.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.30.1.2.13.1.2
cienaCesDhcpv6LdraMplsAdminState
This object allows the user to disable or enable DHCPv6 LDRA
functionality on the given MPLS VS specified by
cienaCesDhcpv6LdraMplsId.
CIENA-TCCienaGlobalStater/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.2.13.1.3
cienaCesDhcpv6LdraMplsOperState
This object shows the operational status of the DHCPv6 LDRA on the given MPLS VS.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.30.1.2.13.1.4
cienaCesDhcpv6LdraMplsRowStatus
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying
on the MPLS VS specified by cienaCesDhcpv6LdraMplsId.

Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying
on the MPLS VS specifie…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.13.1.5

cienaCesDhcpv6LdraMplsTrustTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.14 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraMplsTrustTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraMplsTrustTable' 
This table is used to specify the MPLS VSs and interfaces that
the DHCPv6 LDRA can trust.
cienaCesDhcpv6LdraMplsTrustEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.14.1
Each entry in this table is used to specify the MPLS VS and
interface to be trusted.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraMplsInterface
This object is used as an index in the table and is used to
specify the MPLS interface.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.14.1.1
cienaCesDhcpv6LdraMplsVcName
This object shows the name of the MPLS VC.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.1271.2.1.30.1.2.14.1.2
cienaCesDhcpv6LdraMplsInterfaceState
This object reports whether the specified interface is active or
inactive.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.1271.2.1.30.1.2.14.1.3
cienaCesDhcpv6LdraMplsTrustMode
This object is used to set the interface as client trusted,
server trusted or not trusted.

Note that the client(1) mode is deprecated. That value will
never be returned. Setting that value will set the mo…
Enumerationr/w
Enumerated Values:
1client
2clientTrust
3serverTrust
4dualRoleTrust
5unTrust
 .1.3.6.1.4.1.1271.2.1.30.1.2.14.1.4

cienaCesDhcpv6LdraMplsStatsTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.15 · 1 row entry · 14 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraMplsStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraMplsStatsTable' 
Table to display MPLS statistics for each MPLS LDRA.
cienaCesDhcpv6LdraMplsStatsEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.15.1
Entry in the table to display MPLS LDRA statistics.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraMplsPktsForRelay
This object specifies the number of packets sent to this relay process.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.1
cienaCesDhcpv6LdraMplsRelayedClient
This object specifies the number of client sourced DHCPv6 packets relayed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.2
cienaCesDhcpv6LdraMplsRelayedServer
This object specifies the number of server sourced DHCPv6 packets relayed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.3
cienaCesDhcpv6LdraMplsUntrustedClientInterfacePktsRx
This object specifies the number of client DHCPv6 packets
dropped because they were received on untrusted client
interfaces.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.4
cienaCesDhcpv6LdraMplsUntrustedServerInterfacePktsRx
This object specifies the number of server DHCPv6 packets
dropped because they were received on untrusted server
interfaces.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.5
cienaCesDhcpv6LdraMplsFailedValidationPktDrop
This object specifies the number of DHCPv6 packets dropped due to failed validation.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.6
cienaCesDhcpv6LdraMplsInvalidConfigPktDrop
This object specifies the number of DHCPv6 packets dropped due
to LDRA configuration issues.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.7
cienaCesDhcpv6LdraMplsExceededHopCountPktDrop
This object specifies the number of DHCPv6 packets dropped due to hop count
in the packet exceeding hop count the limit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.8
cienaCesDhcpv6LdraMplsExceedMTUPktDrop
This object specifies the number of DHCPv6 packets dropped because the new
relay frame size would exceed the MTU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.9
cienaCesDhcpv6LdraMplsNoTrustedServerPktDrop
This object specifies the number of DHCPv6 packets dropped
because there are no server trusted interfaces configured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.10
cienaCesDhcpv6LdraMplsNoTrustedClientPktDrop
This object specifies the number of DHCPv6 packets dropped
because there are no client trusted interfaces configured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.11
cienaCesDhcpv6LdraMplsIPv6FragBadExtHdrPktDrop
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet
extension headers that could not be processed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.12
cienaCesDhcpv6LdraMplsGeneralErrors
This object specifies the number of DHCPv6 packets dropped due to unclassified errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.13
cienaCesDhcpv6LdraMplsStatsClear
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
CIENA-TCCienaStatsClearr/w
Type Values:
0none
1clear
 .1.3.6.1.4.1.1271.2.1.30.1.2.15.1.14

cienaCesDhcpv6LdraMplsIntidStringTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.16 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraMplsIntidStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraMplsIntidStringTable' 
This table is used to specify interface ID strings for MPLS VSs
and interfaces that the DHCPv6 LDRA can specify in Option 82 CID
information.
cienaCesDhcpv6LdraMplsIntidStringEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.16.1
Each entry in this table is used to specify an interface ID
string for MPLS VS and interface combinations.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraMplsIntidString
This object is used to get and set the IntID string for the
interface.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1271.2.1.30.1.2.16.1.1
cienaCesDhcpv6LdraMplsIntidStringRowStatus
Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table set this object to 'createAndGo'.
To delete a row in this table set this object to 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.16.1.2

cienaCesDhcpv6LdraMplsRidStringTable

table
.1.3.6.1.4.1.1271.2.1.30.1.2.17 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesDhcpv6LdraMplsRidStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-DHCPV6-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-DHCPV6-CLIENT-MIB::cienaCesDhcpv6LdraMplsRidStringTable' 
This table is used to specify RID strings for MPLS VSs and
interfaces that the DHCPv6 LDRA can specify in Option 82 RID
information.
cienaCesDhcpv6LdraMplsRidStringEntry row .1.3.6.1.4.1.1271.2.1.30.1.2.17.1
Each entry in this table is used to specify an RID string for
MPLS VS and interface combinations.
Indexes
Column Syntax OID
cienaCesDhcpv6LdraMplsRidString
This MIB object is used to get and set the RID string for the
interface.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1271.2.1.30.1.2.17.1.1
cienaCesDhcpv6LdraMplsRidStringRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table set this object
to 'createAndGo'.

To delete a row in this table set this object
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.30.1.2.17.1.2