CIENA-CES-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
30

cienaCesAclTable

table deprecated
.1.3.6.1.4.1.1271.2.1.25.1.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-ACL-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-ACL-MIB::cienaCesAclTable' 
The (conceptual) table listing the parameters for the IP ACL table.
cienaCesAclEntry row .1.3.6.1.4.1.1271.2.1.25.1.2.1.1
An entry (conceptual row) in the cienaCesAclTable.
Indexes
Column Syntax OID
cienaCesAclEntryInetAddrTypedeprecated
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesAclEntryInetAddr and cienaCesAclEntryInetPrefixLength.
When representing:
ipv4 : cienaCes…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.1
cienaCesAclEntryInetAddrdeprecated
This object indicates the source IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesAclEntryInetAddrType and should be compliant with RFC
4001 InetAddressType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.2
cienaCesAclEntryInetPrefixLengthdeprecated
This object indicates the prefix length for the source IP network
that will be authorized. This OID should be used in conjunction
with cienaCesAclEntryInetAddrType.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.3
cienaCesAclEntryHitsdeprecated
This object indicates the number of lookups that matched the table entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.4
cienaCesAclEntryBadPortdeprecated
This object indicates the number of lookups that failed because the ingress
port was disallowed by the table entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.5
cienaCesAclEntryDscpMaskdeprecated
This object indicates the DSCP values for which IP packets
are allowed to ingress. The mask is big endian and each bit,
numbered from 0 to 63, represents a DSCP value numbered from
0 to 63. A value of 0xFFFFFFFFFFFFF…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.6
cienaCesAclEntryBadDscpdeprecated
This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by the table entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.7
cienaCesAclEntryPortBitMaskdeprecated
This object indicates the physical ports on which frames will
be allowed to ingress from. The mask is big endian and each bit,
numbered from 0 to 63, represents a physical port numbered from
1 to 64. A value of 0xFFFF…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.8
cienaCesAclEntryNotifInetAddrTypedeprecated
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs cienaCesAclEntryNotifInetAddr and
cienaCesAclEntryNotifInetPrefixLength.
When representing:
ipv4 …
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.9
cienaCesAclEntryNotifInetAddrdeprecated
This object indicates the IP network address that will be authorized.
This OID should be used in conjunction with cienaCesAclEntryNotifInetAddrType
and should be compliant with RFC 4001 InetAddressType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.10
cienaCesAclEntryNotifInetPrefixLengthdeprecated
This object indicates the prefix length for the IP network that will be authorized.
This OID should be used in conjunction with cienaCesAclEntryNotifInetAddrType.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.1271.2.1.25.1.2.1.1.11

cienaCesExtAclTable

table
.1.3.6.1.4.1.1271.2.1.25.1.2.2 · 1 row entry · 19 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesExtAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-ACL-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-ACL-MIB::cienaCesExtAclTable' 
The (conceptual) table listing the parameters for the 
extended IP ACL table.
cienaCesExtAclEntry row .1.3.6.1.4.1.1271.2.1.25.1.2.2.1
An entry (conceptual row) in the cienaCesExtAclTable.
Indexes
Column Syntax OID
cienaCesExtAclEntrySrcInetAddrType
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntrySrcInetAddr and
cienaCesExtAclEntrySrcInetPrefixLen.
When representing:
ipv4 :…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.1
cienaCesExtAclEntrySrcInetAddr
This object indicates the source IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntrySrcInetAddrType and should be compliant with RFC
4001 InetAddressType.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.2
cienaCesExtAclEntrySrcInetPrefixLen
This object indicates the prefix length for the source IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExtAclEntrySrcInetAddrType.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.3
cienaCesExtAclEntryDstInetAddrType
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntryDstInetAddr and
cienaCesExtAclEntryDstInetPrefixLen.
When representing:
ipv4 :…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.4
cienaCesExtAclEntryDstInetAddr
This object indicates the destination IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntryDstInetAddrType and should be compliant with RFC
4001 InetAddressType.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.5
cienaCesExtAclEntryDstInetPrefixLen
This object indicates the prefix length for the destination IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExtAclEntryDstInetAddrType.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.6
cienaCesExtAclEntryNotifSrcInetAddrType
Duplicate of cienaCesExtAclEntrySrcInetAddrType for display purposes.
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntrySrcInetA…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.7
cienaCesExtAclEntryNotifSrcInetAddr
Duplicate of cienaCesExtAclEntrySrcInetAddr for display purposes.
This object indicates the source IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntryNotifSrcIn…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.8
cienaCesExtAclEntryNotifSrcInetPrefixLen
Duplicate of cienaCesExtAclEntrySrcInetPrefixLen for display purposes.
This object indicates the prefix length for the source IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExt…
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.9
cienaCesExtAclEntryNotifDstInetAddrType
Duplicate of cienaCesExtAclEntryDstInetAddrType for display purposes.
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntryNotifDst…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.10
cienaCesExtAclEntryNotifDstInetAddr
Duplicate of cienaCesExtAclEntryDstInetAddr for display purposes.
This object indicates the destination IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntryNotif…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.11
cienaCesExtAclEntryNotifDstInetPrefixLen
Duplicate of cienaCesExtAclEntryDstInetPrefixLen for display purposes.
This object indicates the prefix length for the destination IP network
that will be authorized. This OID should be used in conjunction
with cienaC…
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.12
cienaCesExtAclEntryHits
This object indicates the number of lookups that matched the table entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.13
cienaCesExtAclEntryBadPort
This object indicates the number of lookups that failed because the ingress
port was disallowed by the table entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.14
cienaCesExtAclEntryDscpMask
This object indicates the DSCP values for which IP packets
are allowed to ingress. The mask is big endian and each bit,
numbered from 0 to 63, represents a DSCP value numbered from
0 to 63. A value of 0xFFFFFFFFFFFFF…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.15
cienaCesExtAclEntryBadDscp
This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by the table entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.16
cienaCesExtAclEntryPortBitMask
This object indicates the physical ports on which frames will
be allowed to ingress from. The mask is big endian and each bit,
numbered from 0 to 63, represents a physical port numbered from
1 to 64. A value of 0xFFFF…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.17
cienaCesExtAclEntryProtocol
List of protocols allowed for the ACL entry.
Bits
Enumerated Values:
0icmp
1tcp
2udp
15all
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.18
cienaCesExtAclEntryBadProtocol
This object indicates the number of lookups that failed because
the protocol value did't match what was in the ACL entry with IP
address(es) matching
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.25.1.2.2.1.19