CIE1000-SYSUTIL-MIB Table View

Table of temperature monitor config.

cie1000SysutilConfigTemperatureMonitorEntry row .1.3.6.1.4.1.9.9.832.1.24.1.2.3.1

Each row set the sensor config.

Indexes

cie1000SysutilConfigTemperatureMonitorSensorId

Column	Syntax	OID
cie1000SysutilConfigTemperatureMonitorSensorId The identification of sensor for tempeature monitor.	CIE1000SysutilTemperatureMonitorSensorType Type Values: 0 board 1 junction	.1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.1
cie1000SysutilConfigTemperatureMonitorLowThreshold The low threshold of temperature monior.	Integer32r/w Constraints: range: -40-125	.1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.2
cie1000SysutilConfigTemperatureMonitorHighThreshold The high threshold of temperature monior.	Integer32r/w Constraints: range: -40-125	.1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.3
cie1000SysutilConfigTemperatureMonitorCriticalThreshold The critical threshold of temperature monior.	Integer32r/w Constraints: range: 90-150	.1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.4
cie1000SysutilConfigTemperatureMonitorHysteresis The value of hysteresis for temperature check.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.5

Table of power supply status.

cie1000SysutilStatusPowerSupplyEntry row .1.3.6.1.4.1.9.9.832.1.24.1.3.2.1

Each row contains the power supply status.

Indexes

cie1000SysutilStatusPowerSupplySwitchId cie1000SysutilStatusPowerSupplyPsuId

Column	Syntax	OID
cie1000SysutilStatusPowerSupplySwitchId The identification of switch.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.1
cie1000SysutilStatusPowerSupplyPsuId The identification of power supply.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.2
cie1000SysutilStatusPowerSupplyState The state of power supply.	CIE1000SysutilPowerSupplyStateType Type Values: 0 active 1 standby 2 notPresent	.1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.3
cie1000SysutilStatusPowerSupplyDescription The description of power supply.	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.4

Table of system LED status.

cie1000SysutilStatusSystemLedEntry row .1.3.6.1.4.1.9.9.832.1.24.1.3.3.1

Each row contains the system LED status.

Indexes

cie1000SysutilStatusSystemLedSwitchId

Column	Syntax	OID
cie1000SysutilStatusSystemLedSwitchId The identification of switch.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.9.832.1.24.1.3.3.1.1
cie1000SysutilStatusSystemLedDescription The description of system LED status.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.9.9.832.1.24.1.3.3.1.2

Table of temperature monitor status.

cie1000SysutilStatusTemperatureMonitorEntry row .1.3.6.1.4.1.9.9.832.1.24.1.3.6.1

Each row contains the sensor status.

Indexes

cie1000SysutilStatusTemperatureMonitorSensorId

Column	Syntax	OID
cie1000SysutilStatusTemperatureMonitorSensorId The identification of sensor for tempeature monitor.	CIE1000SysutilTemperatureMonitorSensorType Type Values: 0 board 1 junction	.1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.1
cie1000SysutilStatusTemperatureMonitorLowAlarm The alarm flag of temperature low status.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.2
cie1000SysutilStatusTemperatureMonitorHighAlarm The alarm flag of temperature high status.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.3
cie1000SysutilStatusTemperatureMonitorCriticalAlarm The alarm flag of temperature critical status.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.4
cie1000SysutilStatusTemperatureMonitorTemperature Current temperature.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.5

The table is the list of LED nodes. The index is the name of the LED
node

cie1000SysutilStatusLedStatusSystemEntry row .1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1

An index is a name e.g. alm

Indexes

cie1000SysutilStatusLedStatusSystemLedId

Column	Syntax	OID
cie1000SysutilStatusLedStatusSystemLedId The identification of the system LED.	CIE1000SysutilLedNameIndex Type Values: 0 alm 1 dca 2 dcb 3 exp 4 poe 5 sys	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.1
cie1000SysutilStatusLedStatusSystemLedColor Color of LED. off(0) - The led is off, green(1) - The led is green, red(2) - The led is red, amber(3) - The led is amber, green_red(4) - The led is bi-color greed red, green_amber(5) - The led is bi-color green amber.	CIE1000SysutilLedColor Type Values: 0 off 1 green 2 red 3 amber 4 green-red 5 green-amber	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.2
cie1000SysutilStatusLedStatusSystemLedMode Type of LED mode.initial(0) Initial state. solid(1) LED is solid on.off(2) LED is turned off.blinking(3) LED is blinking.alternative(4) LED is in alternative mode.	CIE1000SysutilLedMode Type Values: 0 initial 1 solid 2 off 3 blinking 4 alternative	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.3
cie1000SysutilStatusLedStatusSystemDescription The description of system LED status.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.4

The table is the list of port interface LED nodes. The index is the
port interface

cie1000SysutilStatusLedStatusPortEntry row .1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1

Port interface

Indexes

cie1000SysutilStatusLedStatusPortIfIndex

Column	Syntax	OID
cie1000SysutilStatusLedStatusPortIfIndex Logical interface number.	CIE1000-TCCIE1000InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.1
cie1000SysutilStatusLedStatusPortLedColor Color of LED. off(0) - The led is off, green(1) - The led is green, red(2) - The led is red, amber(3) - The led is amber, green_red(4) - The led is bi-color greed red, green_amber(5) - The led is bi-color green amber.	CIE1000SysutilLedColor Type Values: 0 off 1 green 2 red 3 amber 4 green-red 5 green-amber	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.2
cie1000SysutilStatusLedStatusPortLedMode Type of LED mode.initial(0) Initial state. solid(1) LED is solid on.off(2) LED is turned off.blinking(3) LED is blinking.alternative(4) LED is in alternative mode.	CIE1000SysutilLedMode Type Values: 0 initial 1 solid 2 off 3 blinking 4 alternative	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.3
cie1000SysutilStatusLedStatusPortDescription The description of system LED status.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.4

This is a table to reboot a swicth

cie1000SysutilControlRebootEntry row .1.3.6.1.4.1.9.9.832.1.24.1.4.1.1

Each switch has a set of parameters

Indexes

cie1000SysutilControlRebootSwitchId

Column	Syntax	OID
cie1000SysutilControlRebootSwitchId The identification of switch.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.9.832.1.24.1.4.1.1.1
cie1000SysutilControlRebootType Type of reboot. noReboot(0) does not reboot. coldReboot(1) is to do cold reboot. warmReboot(2) is to do warm reboot, but this is optional. The OID of vtssSysutilCapabilitiesWarmRebootSupported tells if warm reboot is su…	CIE1000SysutilRebootTyper/w Type Values: 0 noReboot 1 coldReboot 2 warmReboot 3 factoryReset	.1.3.6.1.4.1.9.9.832.1.24.1.4.1.1.2

This is a table to clear the system LED error status

cie1000SysutilControlSystemLedEntry row .1.3.6.1.4.1.9.9.832.1.24.1.4.2.1

Each switch has a set of parameters

Indexes

cie1000SysutilControlSystemLedSwitchId

Column	Syntax	OID
cie1000SysutilControlSystemLedSwitchId The identification of switch.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.9.832.1.24.1.4.2.1.1
cie1000SysutilControlSystemLedClearStatus Type of system LED status clearing.all(0) is used to clear all error status of the system LED and back to normal indication. fatal(1) is used to clear fatal error status of the system LED. software(2) is used to clear g…	CIE1000SysutilSystemLedClearTyper/w Type Values: 0 all 1 fatal 2 software 3 post 4 ztp 5 stackFwChk	.1.3.6.1.4.1.9.9.832.1.24.1.4.2.1.2