CHECKPOINT-TRAP-MIB

        Check Point SNMPv2 Traps, to enable\disable traps use threshold_config on the GW\Mgmt.
On policy installation the Mgmt. confirurations override the GWs configurations
See the most common OIDs, with detailed descriptions, in the SNMP Best Practices Guide - sk98552
(https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk98552)
    
Source file
CHECKPOINT-TRAP-MIB
Last revised
Identity
chkpntTrapMibModule
Base OID
1.3.6.1.4.1.2620.1.2000.0.0
Net-SNMP examples using the checkpoint MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CHECKPOINT-TRAP-MIB' -M '/opt/observium/mibs/checkpoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CHECKPOINT-TRAP-MIB::chkpntTrapMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CHECKPOINT-TRAP-MIB' -M '/opt/observium/mibs/checkpoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CHECKPOINT-TRAP-MIB::chkpntTrapMibModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (85)
.1.3.6.1.4.1.2620
.1.3.6.1.4.1.2620.1
.1.3.6.1.4.1.2620.1.2000
.1.3.6.1.4.1.2620.1.2000.0
.1.3.6.1.4.1.2620.1.2000.0.0
.1.3.6.1.4.1.2620.1.2000.0.10
.1.3.6.1.4.1.2620.1.2000.0.11
.1.3.6.1.4.1.2620.1.2000.0.12
Integer32
.1.3.6.1.4.1.2620.1.2000.0.13
.1.3.6.1.4.1.2620.1.2000.0.14
Integer32
.1.3.6.1.4.1.2620.1.2000.0.15
Integer32
.1.3.6.1.4.1.2620.1.2000.0.16
.1.3.6.1.4.1.2620.1.2000.0.17
Integer32
.1.3.6.1.4.1.2620.1.2000.0.18
Integer32
.1.3.6.1.4.1.2620.1.2000.0.19
Integer32
.1.3.6.1.4.1.2620.1.2000.0.20
Integer32
.1.3.6.1.4.1.2620.1.2000.0.21
Integer32
.1.3.6.1.4.1.2620.1.2000.0.22
Integer32
.1.3.6.1.4.1.2620.1.2000.0.23
Integer32
.1.3.6.1.4.1.2620.1.2000.0.24
.1.3.6.1.4.1.2620.1.2000.0.25
.1.3.6.1.4.1.2620.1.2000.0.26
.1.3.6.1.4.1.2620.1.2000.0.27
.1.3.6.1.4.1.2620.1.2000.0.28
.1.3.6.1.4.1.2620.1.2000.0.29
Integer32
.1.3.6.1.4.1.2620.1.2000.0.30
.1.3.6.1.4.1.2620.1.2000.0.31
OctetString
.1.3.6.1.4.1.2620.1.2000.0.32
OctetString
.1.3.6.1.4.1.2620.1.2000.0.33
OctetString
.1.3.6.1.4.1.2620.1.2000.0.34
OctetString
.1.3.6.1.4.1.2620.1.2000.0.35
OctetString
.1.3.6.1.4.1.2620.1.2000.0.36
OctetString
.1.3.6.1.4.1.2620.1.2000.0.37
OctetString
.1.3.6.1.4.1.2620.1.2000.0.38
OctetString
.1.3.6.1.4.1.2620.1.2000.0.39
Integer32
.1.3.6.1.4.1.2620.1.2000.0.40
OctetString
.1.3.6.1.4.1.2620.1.2000.0.41
OctetString
.1.3.6.1.4.1.2620.1.2000.0.42
OctetString
.1.3.6.1.4.1.2620.1.2000.0.43
OctetString
.1.3.6.1.4.1.2620.1.2000.0.44
Integer32
.1.3.6.1.4.1.2620.1.2000.0.45
OctetString
.1.3.6.1.4.1.2620.1.2000.0.46
OctetString
.1.3.6.1.4.1.2620.1.2000.0.47
OctetString
.1.3.6.1.4.1.2620.1.2000.0.48
OctetString
.1.3.6.1.4.1.2620.1.2000.0.49
Integer32
.1.3.6.1.4.1.2620.1.2000.0.50
.1.3.6.1.4.1.2620.1.2000.1
.1.3.6.1.4.1.2620.1.2000.2
.1.3.6.1.4.1.2620.1.2000.3
.1.3.6.1.4.1.2620.1.2000.4
.1.3.6.1.4.1.2620.1.2000.5
.1.3.6.1.4.1.2620.1.2000.5.1
.1.3.6.1.4.1.2620.1.2000.5.2
.1.3.6.1.4.1.2620.1.2000.5.3
.1.3.6.1.4.1.2620.1.2000.6
.1.3.6.1.4.1.2620.1.2000.7
.1.3.6.1.4.1.2620.1.2001
.1.3.6.1.4.1.2620.1.2001.0
.1.3.6.1.4.1.2620.1.2001.0.10
.1.3.6.1.4.1.2620.1.2001.0.11
.1.3.6.1.4.1.2620.1.2001.0.12
Integer32
.1.3.6.1.4.1.2620.1.2001.0.13
.1.3.6.1.4.1.2620.1.2001.0.14
.1.3.6.1.4.1.2620.1.2001.0.15
.1.3.6.1.4.1.2620.1.2001.0.16
.1.3.6.1.4.1.2620.1.2001.0.17
.1.3.6.1.4.1.2620.1.2001.0.18
.1.3.6.1.4.1.2620.1.2001.1
.1.3.6.1.4.1.2620.1.2001.10
.1.3.6.1.4.1.2620.1.2001.2
.1.3.6.1.4.1.2620.1.2001.3
.1.3.6.1.4.1.2620.1.2001.4
.1.3.6.1.4.1.2620.1.2001.5
.1.3.6.1.4.1.2620.1.2001.6
.1.3.6.1.4.1.2620.1.2001.7
.1.3.6.1.4.1.2620.1.2001.7.1
.1.3.6.1.4.1.2620.1.2001.7.2
.1.3.6.1.4.1.2620.1.2001.7.3
.1.3.6.1.4.1.2620.1.2001.7.4
.1.3.6.1.4.1.2620.1.2001.7.5
.1.3.6.1.4.1.2620.1.2001.8
.1.3.6.1.4.1.2620.2
.1.3.6.1.4.1.2620.2.1
.1.3.6.1.4.1.2620.2.2
.1.3.6.1.4.1.2620.2.3
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. CHECKPOINT-MIBcheckpoint
  5. CHECKPOINT-TRAP-MIBcheckpointselected
Conformance Groups (2)
A collection of managed objects that provide information about CheckPoint objects
.1.3.6.1.4.1.2620.2.2.1
This is a group of notifications
.1.3.6.1.4.1.2620.2.3.1
Compliance Statements (1)

OID .1.3.6.1.4.1.2620.2.1.1
The compliance statement for check point entities which implement the chkpnt MIB.
Required groups
optional chkpntTrapGroup This group is for checkpoint traps
optional chkpntNotificationGroup This group is for chkpnt notifications
Notifications / Traps (64)
NameOIDDescription
.1.3.6.1.4.1.2620.1.2000.1.1
Interface admin status alert, alerts when svnNetIfState = 0(Interface name provided in trap)
.1.3.6.1.4.1.2620.1.2000.1.2
Interface unplugged alert, alerts when an interface disappear from svnNetIfTable(Interface name provided in trap)
.1.3.6.1.4.1.2620.1.2000.1.3
New connection rate alert, alerts when the new connection rate equals\exceeds X (New Connections/Sec)
.1.3.6.1.4.1.2620.1.2000.1.4
Concurrent connections rate alert, alerts when fwNumConn >= X (Connections/Sec)
.1.3.6.1.4.1.2620.1.2000.1.5
Bytes throughput alert, alerts when the throughput equals\exceeds X (Bytes/Sec)
.1.3.6.1.4.1.2620.1.2000.1.6
Accepted packet rate alert, alerts when the accepted packet rate equals\exceeds X (Packets/Sec)
.1.3.6.1.4.1.2620.1.2000.1.7
Interface operational link status alert, alerts when svnNetIfOperState = 0(Interface name provided in trap)
.1.3.6.1.4.1.2620.1.2000.1.8
Interface RX drops changed alert, alerts when svnNetIfRXDrop changed
.1.3.6.1.4.1.2620.1.2000.2.1
Monitored disk partiton is dangerously full alert, alerts when multiDiskFreeAvailablePercent <= X (filesystem name in trap)
.1.3.6.1.4.1.2620.1.2000.2.2
Monitored RAID volume state, alerts when raidVolumeState = 2(volume ID in trap)
.1.3.6.1.4.1.2620.1.2000.2.3
Monitored RAID disk state alert, alerts when raidDiskState is one of [DEGRADED (1), FAILED(2) or UNKNOWN(255)](disk ID and volume ID in trap)
.1.3.6.1.4.1.2620.1.2000.2.4
Monitored RAID disk flag alert, alerts when raidDiskFalgs contains the OUT_OF_SYNC(0x01) or QUIESCED(0x02) flags (disk ID and volume ID in trap)
.1.3.6.1.4.1.2620.1.2000.3.1
Core utilization alert, alerts when multiProcUsage >= X (core name in trap)
.1.3.6.1.4.1.2620.1.2000.3.2
Core interrupts alert, alerts when multiProcInterrupts >= X (core name in trap)
.1.3.6.1.4.1.2620.1.2000.4.1
Swap memory utilization alert, alerts when memActiveVirtual64 exceeds X% of memTotalVirtual64
.1.3.6.1.4.1.2620.1.2000.4.2
Real memory utilization alert, alerts when memActiveReal64 exceeds X% of memTotalReal64
.1.3.6.1.4.1.2620.1.2000.5.1.1
Temperture sensor alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2000.5.2.1
Fan speed sensor alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2000.5.3.1
Voltage sensor alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2000.6.1
Cluster member state changed alert, alerts when haState changed (Cluster member identifier provided in trap)
.1.3.6.1.4.1.2620.1.2000.6.2
Cluster block state alert, alert when haBlockState is not equal to OK (Cluster member identifier provided in trap)
.1.3.6.1.4.1.2620.1.2000.6.3
Cluster state alert, alert when haStatCode is not equal to 0 (Cluster member identifier provided in trap)
.1.3.6.1.4.1.2620.1.2000.6.4
Cluster problem status alert, alert when haProblemStatus is not equal to OK
.1.3.6.1.4.1.2620.1.2000.6.5
Cluster interface status alert, alerts when haStatus is not equal to Up (Interface name provided in trap)
.1.3.6.1.4.1.2620.1.2000.6.6
ClusterXL failover alert, alerts when haClusterXLFailover is happened (clusterXL failover counter value provided in trap)
.1.3.6.1.4.1.2620.1.2000.7.1
Problem with connection to log server(Log server name provided in trap)
.1.3.6.1.4.1.2620.1.2000.7.2
Problem with connection to one or more log servers
.1.3.6.1.4.1.2620.1.2000.7.3
Problem with one or more log servers resulted with local logging
.1.3.6.1.4.1.2620.1.2001.1.1
Critical Alert: Chassis State
.1.3.6.1.4.1.2620.1.2001.1.2
Critical Alert: Blade State
.1.3.6.1.4.1.2620.1.2001.1.3
Cluster problem status alert
.1.3.6.1.4.1.2620.1.2001.1.5
Monitor state
.1.3.6.1.4.1.2620.1.2001.10.1
Route inconsistency
.1.3.6.1.4.1.2620.1.2001.10.2
Periodic system diagnostics (asg diag)
.1.3.6.1.4.1.2620.1.2001.10.3
Pingable hosts state
.1.3.6.1.4.1.2620.1.2001.10.4
Memory leak detection reached threshold
.1.3.6.1.4.1.2620.1.2001.10.5
SYN Defender activation
.1.3.6.1.4.1.2620.1.2001.10.6
LSP monitor change port state
.1.3.6.1.4.1.2620.1.2001.2.1
Interface Status Alert (Interface name provided in trap)
.1.3.6.1.4.1.2620.1.2001.2.2
Administrative Status Alert (Interface name provided in trap)
.1.3.6.1.4.1.2620.1.2001.3.1
Monitored disk partiton is dangerously Full Alert (filesystem name in trap)
.1.3.6.1.4.1.2620.1.2001.3.2
Monitored RAID volume state (volume ID in trap)
.1.3.6.1.4.1.2620.1.2001.3.3
Monitored RAID disk state (disk ID and volume ID in trap)
.1.3.6.1.4.1.2620.1.2001.4.1
CPU Core Utilization Alert (Core number provided in trap)
.1.3.6.1.4.1.2620.1.2001.4.2
CPU Core Interrupts Alert (Core number provided in trap)
.1.3.6.1.4.1.2620.1.2001.5.1
Swap Memory Utilization Alert
.1.3.6.1.4.1.2620.1.2001.5.2
Real Memory Utilization Alert
.1.3.6.1.4.1.2620.1.2001.7.1.1
Temperture sensor alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.1.2
Temperture sensor status alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.2.1
Fan speed sensor alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.2.2
Fan speed sensor status alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.3.1
Voltage sensor alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.3.2
Voltage sensor status alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.4.1
Security Switch Module alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.4.2
Security Switch Module port status alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.7.5.1
Chassis Management Module alert (Sensor name provided in trap)
.1.3.6.1.4.1.2620.1.2001.8.1
Connection Rate Alert (per blade), in connections/sec
.1.3.6.1.4.1.2620.1.2001.8.2
Concurrent Connections Alert (per blade)
.1.3.6.1.4.1.2620.1.2001.8.3
Concurrent Connections Total Alert (per system)
.1.3.6.1.4.1.2620.1.2001.8.4
Connections Rate Total Alert (per system), in connections/sec
.1.3.6.1.4.1.2620.1.2001.8.5
Throughput Alert (per blade), in bps
.1.3.6.1.4.1.2620.1.2001.8.6
Throughput Total Alert (per system), in bps
.1.3.6.1.4.1.2620.1.2001.8.7
Packet Rate Alert (per blade), in bps
.1.3.6.1.4.1.2620.1.2001.8.8
Packet Rate Total Alert (per system), in bps