CENTRECOM-VLAN-MIB Table View

This table lists VLAN interfaces that exist within
a device.  A single entry exists in this list for each
VLAN interface in the system.  A VLAN interface may
be created, destroyed and/or mapped to a globally identified
vlan.

atiVlanIfEntry row .1.3.6.1.4.1.207.8.12.2.4.1.2.1

An individual VLAN interface entry. When an NMS wishes
to create a new entry in this table, it must obtain a
non-zero index from the atiNextAvailableVirtIfIndex
object. Row creation in this table will fail if the
cho…

Indexes

atiVlanIfIndex

Column	Syntax	OID
atiVlanIfIndex The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the atiNextAvailableVirtIfIndex object.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.12.2.4.1.2.1.1
atiVlanIfDescr This is a description of the VLAN interface.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.207.8.12.2.4.1.2.1.2
atiVlanIfType The VLAN interface type.	AtiSwitchVlanTyper/w Type Values: 1 vlanLayer2	.1.3.6.1.4.1.207.8.12.2.4.1.2.1.3
atiVlanIfGlobalIdentifier An administratively assigned global VLAN identifier. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to thi…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.207.8.12.2.4.1.2.1.4
atiVlanIfStatus The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) no…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.207.8.12.2.4.1.2.1.6

This table lists VLAN encapsulation interfaces that
exist within a device.  A single entry exists in this
list for each VLAN encapsulation interface in the
system.  A VLAN encapsulation interface may be created
or destroyed.

atiVlanEncapsIfEntry row .1.3.6.1.4.1.207.8.12.2.4.3.1.1

An individual VLAN encapsulation interface entry.
When an NMS wishes to create a new entry in this table,
it must obtain a non-zero index from the
atiNextAvailableVirtIfIndex object. Row creation in
this table will fa…

Indexes

atiVlanEncapsIfIndex

Column	Syntax	OID
atiVlanEncapsIfIndex The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the atiNextAvailableVirtIfIndex object.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.12.2.4.3.1.1.1
atiVlanEncapsIfType The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.	AtiSwitchVlanEncapsTyper/w Type Values: 2 vlanEncaps8021q	.1.3.6.1.4.1.207.8.12.2.4.3.1.1.2
atiVlanEncapsIfTag The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.12.2.4.3.1.1.3
atiVlanEncapsIfStatus The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.207.8.12.2.4.3.1.1.4

Table of defined combinations of protocol IDs 
that make up one protocol definition name. 
All members of one protocol definition share 
the same atiVlanProtocolIndex. A given 
protocol ID may appear in the definition of 
just one protocol definition. This table will
typically contain some default entries for
popular protocols.

atiVlanProtocolEntry row .1.3.6.1.4.1.207.8.12.2.4.5.1.1

One member protocol ID of a protocol definition.

Indexes

atiVlanProtocolIndex atiVlanProtocolIdIndex

Column	Syntax	OID
atiVlanProtocolIndex An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7).	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.207.8.12.2.4.5.1.1.1
atiVlanProtocolIdIndex An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per atiVlanProtocolIndex (up to 6).	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.207.8.12.2.4.5.1.1.2
atiVlanProtocolName A human-readable string representing this protocol. This string should be the same for all entries sharing a given atiVlanProtocolIndex. A atiVlanProtocolEntry with atiVlanProtocolName of ANY represents a match on al…	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.207.8.12.2.4.5.1.1.3
atiVlanProtocolDllEncapsType Represents the type of data-link encapsulation in which the atiVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not expl…	Enumerationr/w Enumerated Values: 1 any 2 ethertype 3 llc 4 llcSnapEthertype	.1.3.6.1.4.1.207.8.12.2.4.5.1.1.4
atiVlanProtocolId The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.207.8.12.2.4.5.1.1.5
atiVlanProtocolStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.207.8.12.2.4.5.1.1.6

Table to apply one of the protocol definitions 
in atiVlanProtocolTable to a given VLAN 
This applies to all ports that are untagged 
in this VLAN). A limited number of protocols
may be applied simultaneously in one device (up to 8).

atiVlanProtocolVlanEntry row .1.3.6.1.4.1.207.8.12.2.4.5.2.1

A mapping of untagged packets of one protocol
onto a particular VLAN.

Indexes

atiVlanProtocolVlanIfIndex atiVlanProtocolVlanProtocolIndex

Column	Syntax	OID
atiVlanProtocolVlanIfIndex The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the atiNextAvailableVirtIfIndex object.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.12.2.4.5.2.1.1
atiVlanProtocolVlanProtocolIndex An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.12.2.4.5.2.1.2
atiVlanProtocolVlanStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.207.8.12.2.4.5.2.1.3