CADANT-TRAP-LOG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
10
.1.3.6.1.4.1.4998.1.1.6.2.2 · 1 row entry · 1 columns
This table allows control of the reporting of event classes.
For each event priority, a combination of logging and
reporting mechanisms may be chosen.
cadEvControlEntry entry .1.3.6.1.4.1.4998.1.1.6.2.2.1
Allows configuration of the reporting mechanisms for a
particular event priority.
Indexes
No indexes recorded
Column Syntax OID
cadEvReporting
Currently, only the console destination is persistent in SNMP.
Transient sessions, such as telnet, are not configurable via the MIB.
Those are configurable only via CLI.
Bitsr/w
Enumerated Values:
0console
.1.3.6.1.4.1.4998.1.1.6.2.2.1.1
.1.3.6.1.4.1.4998.1.1.6.2.3 · 1 row entry · 4 columns
This table allows the event priority to be overridden.
Each entry indicates an override condition for the given
event.
cadEvOverrideEntry entry .1.3.6.1.4.1.4998.1.1.6.2.3.1
Allows configuration of the event priority overrides.
Indexes
cadEvOvrdEvId
Column Syntax OID
cadEvOvrdEvId
Uniquely identifies the type of event that is reported
by this entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4998.1.1.6.2.3.1.1
cadEvOvrdState
Indicates the current override state of the event.
admit allows the event to be generated and inhibit
prevents the event from being generated regardless
of the priority is enabled for the event. Setting
the priority al…
Enumerationr/w
Enumerated Values:
1admit
2inhibit
3priority
.1.3.6.1.4.1.4998.1.1.6.2.3.1.2
cadEvOvrdRowStatus
This variable indicates the status of the entry.
Valid values for a set include createAndGo(4) and
destroy(6).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.4998.1.1.6.2.3.1.3
cadEvOvrdPriority
This field is only valid when the override state is
set to priority and indicates the priority level that
should be used when this notification is generated.
Enumerationr/w
Enumerated Values:
0invalid
1emergency
2alert
3critical
4error
5warning
6notice
7information
8debug
.1.3.6.1.4.1.4998.1.1.6.2.3.1.4
.1.3.6.1.4.1.4998.1.1.6.2.4 · 1 row entry · 3 columns
This table stores syslog server information when
there is more than one syslog server configured.
cadSyslogSvrEntry entry .1.3.6.1.4.1.4998.1.1.6.2.4.1
Syslog server information.
Indexes
cadSyslogSvrIpAddr
Column Syntax OID
cadSyslogSvrIpAddr
IP address of the syslog server.
CADANT-TCInetAddressIPv4or6
Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString
Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20
.1.3.6.1.4.1.4998.1.1.6.2.4.1.1
cadSyslogSvrFacility
Facility associated with the syslog server.
Enumerationr/w
Enumerated Values:
0local0
1local1
2local2
3local3
4local4
5local5
6local6
7local7
.1.3.6.1.4.1.4998.1.1.6.2.4.1.2
cadSyslogSvrRowStatus
This variable displays the status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.4998.1.1.6.2.4.1.3
.1.3.6.1.4.1.4998.1.1.6.2.5 · 1 row entry · 2 columns
This table is used to configure the logging level for
each of the CLI authorization levels.
cadCliAuthToLogLevelEntry entry .1.3.6.1.4.1.4998.1.1.6.2.5.1
Syslog server information.
Indexes
cadCliAuthLevel
Column Syntax OID
cadCliAuthLevel
A CLI authorization level.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.4998.1.1.6.2.5.1.1
cadCliLogLevel
The logging level that all commands assigned to this authorization
level will be output at when executed.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7information
8debug
.1.3.6.1.4.1.4998.1.1.6.2.5.1.2